Junio C Hamano [Thu, 27 Sep 2018 18:20:22 +0000 (11:20 -0700)]
Sync with Git 2.14.4
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
Jeff King [Mon, 24 Sep 2018 08:39:55 +0000 (04:39 -0400)]
submodule-config: ban submodule paths that start with a dash
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 24 Sep 2018 08:36:30 +0000 (04:36 -0400)]
submodule-config: ban submodule urls that start with dash
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 24 Sep 2018 08:32:15 +0000 (04:32 -0400)]
submodule--helper: use "--" to signal end of clone options
When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.
There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: joernchen <joernchen@phenoelit.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Index format v4 requires some more computation to assemble a path
based on a previous one. The current code is not very efficient
because
- it doubles memory copy, we assemble the final path in a temporary
first before putting it back to a cache_entry
- strbuf_remove() in expand_name_field() is not exactly a good fit
for stripping a part at the end, _setlen() would do the same job
and is much cheaper.
- the open-coded loop to find the end of the string in
expand_name_field() can't beat an optimized strlen()
This patch avoids the temporary buffer and writes directly to the new
cache_entry, which addresses the first two points. The last point
could also be avoided if the total string length fits in the first 12
bits of ce_flags, if not we fall back to strlen().
Running "test-tool read-cache 100" on webkit.git (275k files), reading
v2 only takes 4.226 seconds, while v4 takes 5.711 seconds, 35% more
time. The patch reduces read time on v4 to 4.319 seconds.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Mon, 24 Sep 2018 17:39:02 +0000 (10:39 -0700)]
mailmap: consistently normalize brian m. carlson's name
v2.18.0-rc0~70^2 (mailmap: update brian m. carlson's email address,
2018-05-08) changed the mailmap to map
sandals@crustytoothpaste.ath.cx
-> brian m. carlson <sandals@crustytoothpaste.net>
instead of
sandals@crustytoothpaste.net
-> brian m. carlson <sandals@crustytoothpaste.ath.cx>
That means the mapping
Brian M. Carlson <sandals@crustytoothpaste.ath.cx>
-> brian m. carlson <sandals@crustytoothpaste.net>
is redundant, so we can remove it. More importantly, it means that
the identity "Brian M. Carlson <sandals@crustytoothpaste.net>" used in
some commits is not normalized any more. Add a mapping for it.
Noticed while updating Debian's Git packaging, which uses "git
shortlog --no-merges" to produce a list of changes in each version,
grouped by author's (normalized) name.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 21 Sep 2018 23:04:45 +0000 (19:04 -0400)]
receive-pack: update comment with check_everything_connected
That function is now called "check_connected()", but we forgot to update
this comment in 7043c7071c (check_everything_connected: use a struct
with named options, 2016-07-15).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a regression introduced by 4fbcca4e "commit-reach: make
can_all_from_reach... linear" the series including b67f6b26
"commit-reach: properly peel tags" was merged to master quickly.
There were a few more cleanups left to apply in the series, which
are included by this change:
1. Clean up a comment that is in the incorrect style.
2. Replace multiple calls to clear_commit_marks() with one call to
clear_commit_marks_many().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 24 Sep 2018 17:30:51 +0000 (10:30 -0700)]
Merge branch 'nd/attr-pathspec-fix'
"git add ':(attr:foo)'" is not supported and is supposed to be
rejected while the command line arguments are parsed, but we fail
to reject such a command line upfront.
* nd/attr-pathspec-fix:
add: do not accept pathspec magic 'attr'
Junio C Hamano [Mon, 24 Sep 2018 17:30:46 +0000 (10:30 -0700)]
Merge branch 'bp/mv-submodules-with-fsmonitor'
When fsmonitor is in use, after operation on submodules updates
.gitmodules, we lost track of the fact that we did so and relied on
stale fsmonitor data.
* bp/mv-submodules-with-fsmonitor:
git-mv: allow submodules and fsmonitor to work together
Junio C Hamano [Mon, 24 Sep 2018 17:30:45 +0000 (10:30 -0700)]
Merge branch 'js/rebase-i-autosquash-fix'
"git rebase -i" did not clear the state files correctly when a run
of "squash/fixup" is aborted and then the user manually amended the
commit instead, which has been corrected.
* js/rebase-i-autosquash-fix:
rebase -i: be careful to wrap up fixup/squash chains
rebase -i --autosquash: demonstrate a problem skipping the last squash
Thomas Gummerer [Mon, 17 Sep 2018 21:46:28 +0000 (22:46 +0100)]
t5551: compare sorted cookies files
In t5551 we check that we save cookies correctly to a file when
http.cookiefile and http.savecookies are set. To do so we create an
expect file that expects the cookies in a certain order.
However after e2ef8d6fa ("cookies: support creation-time attribute for
cookies", 2018-08-28) in curl.git (released in curl 7.61.1) that order
changed.
We document the file format as "Netscape/Mozilla cookie file
format (see curl(1))", so any format produced by libcurl should be
fine here. Sort the files, to be agnostic to the order of the
cookies, and make the test pass with both curl versions > 7.61.1 and
earlier curl versions.
Reported-by: Todd Zullinger <tmz@pobox.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Mon, 17 Sep 2018 21:46:27 +0000 (22:46 +0100)]
t5551: move setup code inside test_expect blocks
Move setup code inside test_expect blocks, to catch unexpected
failures in the setup steps, and bring the test scripts in line with
our modern test style.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Fri, 21 Sep 2018 18:22:38 +0000 (11:22 -0700)]
fetch: in partial clone, check presence of targets
When fetching an object that is known as a promisor object to the local
repository, the connectivity check in quickfetch() in builtin/fetch.c
succeeds, causing object transfer to be bypassed. However, this should
not happen if that object is merely promised and not actually present.
Because this happens, when a user invokes "git fetch origin <sha-1>" on
the command-line, the <sha-1> object may not actually be fetched even
though the command returns an exit code of 0. This is a similar issue
(but with a different cause) to the one fixed by a0c9016abd
("upload-pack: send refs' objects despite "filter"", 2018-07-09).
Therefore, update quickfetch() to also directly check for the presence
of all objects to be fetched. Its documentation and name are also
updated to better reflect what it does.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Fri, 21 Sep 2018 18:22:37 +0000 (11:22 -0700)]
connected: document connectivity in partial clones
In acb0c57260 ("fetch: support filters", 2017-12-08), check_connected()
was extended to allow objects to either be promised to be available (if
the repository is a partial clone) or to be present; previously, this
function required the latter. However, this change was not reflected in
the documentation of that function. Update the documentation
accordingly.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The can_all_from_reach_with_flag() method uses 'assign_flag' as a
value we can use to mark objects temporarily during our commit walk.
The intent is that these flags are removed from all objects before
returning. However, this is not the case.
The 'from' array could also contain objects that are not commits, and
we mark those objects with 'assign_flag'. Add a loop to the 'cleanup'
section that removes these markers.
Also, we forgot to free() the memory for 'list', so add that to the
'cleanup' section.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The can_all_from_reach_with_flag() algorithm was refactored in 4fbcca4e
"commit-reach: make can_all_from_reach... linear" but incorrectly
assumed that all objects provided were commits. During a fetch
negotiation, ok_to_give_up() in upload-pack.c may provide unpeeled tags
to the 'from' array. The current code creates a segfault.
Add a direct call to can_all_from_reach_with_flag() in 'test-tool reach'
and add a test in t6600-test-reach.sh that demonstrates this segfault.
Correct the issue by peeling tags when investigating the initial list
of objects in the 'from' array.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
userdiff.c: remove implicit dependency on the_index
[jc: squashed in missing forward decl in userdiff.h found by Ramsay]
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason rerere(), rerere_forget() and rerere_remaining() take a
struct repository instead of struct index_state is not obvious from
the patch:
Deep in update_paths() and find_conflict(), hold_locked_index() and
read_index() are called. These functions assumes the index path at
$GIT_DIR/index which is not always true when you take an arbitrary
index state. Taking a repository will allow us to point to the right
index path later when we replace them with repo_ versions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new variant repo_diff_setup() is added that takes 'struct repository *'
and diff_setup() becomes a thin macro around it that is protected by
NO_THE_REPOSITORY_COMPATIBILITY_MACROS, similar to NO_THE_INDEX_....
The plan is these macros will always be defined for all library files
and the macros are only accessible in builtin/
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current naming convention for 'struct repository *' is 'r' for
temporary variables or arguments. I did not notice this. Since we're
updating blame.c again in the next patch, let's fix this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff and textconv code has so widespread use that it's hard to simply
update their api and all call sites at once because it would result in
a big patch. For now reduce the_index references to two places:
diff_setup() and fill_textconv().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache.c: remove 'const' from index_has_changes()
This function calls do_diff_cache() which eventually needs to set this
"istate" to unpack_options->src_index [1]. This is an unfortunate fact
that unpack_trees() _will_ update [2] src_index so we can't really pass a
const index_state there. Just remove 'const'.
[1] Right now diff_cache() in diff-lib.c assigns the_index to
src_index. But the plan is to get rid of the_index, so it should
be 'istate' from here that gets assigned to src_index.
[2] Some transient bits in the source index are touched. Optional
extensions can also be removed. But other than that the source
tree should still be valid.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --multiple is given, the remaining arguments are remote names,
not one remote followed by zero or more refspec. Detect this case,
disable refspec completion, and pretend no remote is seen in order to
complete multiple of them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frederick Eaton [Wed, 19 Sep 2018 20:12:30 +0000 (13:12 -0700)]
git-column.1: clarify initial description, provide examples
When I read this man page I couldn't figure out what kind of input it
was referring to, or how input was being put into columns, or where I
should look for the syntax of the --mode option.
Signed-off-by: Frederick Eaton <frederik@ofb.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frederick Eaton [Wed, 19 Sep 2018 20:12:29 +0000 (13:12 -0700)]
git-archimport.1: specify what kind of Arch we're talking about
Is it a CPU architecture? Is it Arch Linux? If you search for "arch
repository", nothing relevant comes up. Let's call it GNU Arch so
people can find it with search engines.
Signed-off-by: Frederick Eaton <frederik@ofb.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b0db704652 (pathspec: allow querying for attributes -
2017-03-13) adds new pathspec magic 'attr' but only with
match_pathspec(). "git add" has some pathspec related code that still
does not know about 'attr' and will bail out:
A better solution would be making this code support 'attr'. But I
don't know how much work is needed (I'm not familiar with this new
magic). For now, let's simply reject this magic with a friendlier
message:
$ git add ':(attr:foo)'
fatal: :(attr:foo): pathspec magic not supported by this command: 'attr'
Update t6135 so that the expected error message is from the
"graceful" rejection codepath, not "oops, we were supposed to reject
the request to trigger this magic" codepath.
Reported-by: smaudet@sebastianaudet.com Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 20 Sep 2018 21:51:43 +0000 (14:51 -0700)]
Merge branch 'ab/fetch-tags-noclobber'
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
This is a backward incompatible change but in a good way; it may
still need to be treated carefully.
* ab/fetch-tags-noclobber:
fetch doc: correct grammar in --force docs
push doc: add spacing between two words
Junio C Hamano [Thu, 20 Sep 2018 21:51:43 +0000 (14:51 -0700)]
Merge branch 'bp/checkout-new-branch-optim'
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
* bp/checkout-new-branch-optim:
config doc: add missing list separator for checkout.optimizeNewBranch
merge_file_1() is a very unhelpful name. Rename it to
merge_mode_and_contents() to reflect what it does.
merge_content() calls merge_mode_and_contents() to do the main part of
its work, but most of this function was about higher level stuff, e.g.
printing out conflict messages, updating skip_worktree bits, checking
for ability to avoid updating the working tree or for D/F conflicts
being in the way, etc. Since there are several handle_*() functions for
similar levels of checking and handling in merge-recursive.c (e.g.
handle_change_delete(), handle_rename_rename_2to1()), let's rename this
function to handle_content_merge().
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: remove final remaining caller of merge_file_one()
The function names merge_file_one() and merge_file_1() aren't
particularly intuitive function names, especially since there is no
associated merge_file() function that these are related to. The
previous commit showed that merge_file_one() was prone to be called when
merge_file_1() should be, and since it is just a thin wrapper around
merge_file_1() anyway and only has one caller left, let's just remove
merge_file_one() entirely.
(It also turns out that the one remaining caller of merge_file_one()
has very broken code that needs to be completely rewritten, but that's
the subject of a future patch series; for now, we're just translating
it into a merge_file_1() call.)
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: avoid wrapper function when unnecessary and wasteful
merge_file_one() is a convenience function taking a bunch of oids and
modes, combining each pair into a diff_filespec, and then calling
merge_file_1(). When we already start with diff_filespec's, we can
just call merge_file_1() directly instead of splitting out the oids
and modes for the wrapper to recombine into what we already had.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: set paths correctly when three-way merging content
merge_3way() has code to mark different sides of the conflict with info
about where the content comes from. If the names of the files involved
match, it simply uses the branch name. If the names of the files do not
match, it uses branchname:filename. Unfortunately, merge_content()
previously always called it with one.path = a.path = b.path. Granted,
it didn't have other path information available to it for years, but
that was corrected by passing rename_conflict_info in commit 3c217c077a86 ("merge-recursive: Provide more info in conflict markers
with file renames", 2011-08-11). In that commit, instead of just fixing
the bug with the pathnames, it created fake branch names incorporating
both the branch name and file name.
This "fake branch" workaround was extended further when I pulled that
logic out into a special function in commit dac4741554e7
("merge-recursive: Create function for merging with branchname:file
markers", 2011-08-11), and a number of other sites outside of
merge_content() have been added which call into that. However, this
Rube-Goldberg-esque setup is not merely duplicate code and unnecessary
work, it also risked having other callsites invoke it in a way that
would result in markers of the form branchname:filename:filename (i.e.
with the filename repeated).
Fix this whole mess by:
- setting one.path, a.path, and b.path appropriately
- calling merge_file_1() directly
- deleting the merge_file_special_markers() workaround wrapper
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gc: fix regression in 7b0f229222 impacting --quiet
Fix a regression in my recent 7b0f229222 ("commit-graph write: add
progress output", 2018-09-17). The newly added progress output for
"commit-graph write" didn't check the --quiet option.
Do so, and add a test asserting that this works as expected. Since the
TTY prequisite isn't available everywhere let's add a version of this
that both requires and doesn't require that. This test might be overly
specific and will break if new progress output is added, but I think
it'll serve as a good reminder to test the undertested progress
mode(s).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Wed, 19 Sep 2018 16:38:18 +0000 (18:38 +0200)]
Doc: use `--type=bool` instead of `--bool`
After fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`, 2018-04-18) we have a more modern way of spelling
`--bool`.
Update all instances except those that explicitly document the
"historical options" in git-config.txt. The other old-style
type-specifiers already seem to be gone except for in that list of
historical options.
Tweak the grammar a little in config.txt while we are there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Wed, 19 Sep 2018 00:07:08 +0000 (01:07 +0100)]
Makefile: add a hdr-check target
Commit ef3ca95475 ("Add missing includes and forward declarations",
2018-08-15) resulted from the author employing a manual method to
create a C file consisting of a pair of pre-processor #include
lines (for 'git-compat-util.h' and a given toplevel header), and
fixing any resulting compiler errors or warnings.
Add a Makefile target to automate this process. This implementation
relies on the '-include' and '-xc' arguments to the 'gcc' and 'clang'
compilers, which allows us to effectively create the required C
compilation unit on-the-fly. This limits the portability of this
solution to those systems which have such a compiler.
The new 'hdr-check' target can be used to check most header files in
the project (for various reasons, the 'compat' and 'xdiff' directories
are not included). Also, note that individual header files can be
checked directly using the '.hco' extension (read: Hdr-Check Object)
like so:
$ make config.hco
HDR config.h
$
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ben Peart [Tue, 18 Sep 2018 23:29:34 +0000 (23:29 +0000)]
preload-index: use git_env_bool() not getenv() for customization
GIT_FORCE_PRELOAD_TEST is only checked for presence by using getenv().
Use git_env_bool() instead so that GIT_FORCE_PRELOAD_TEST=false can
work as expected.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct a grammar error (saying "the receiving" made no sense) in the
recently landed documentation added in my 0bc8d71b99 ("fetch: stop
clobbering existing tags without --force", 2018-08-31) by rephrasing
the sentence. Also correct 'fetching work the same way' by s/work/&s/;
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config doc: add missing list separator for checkout.optimizeNewBranch
The documentation added in fa655d8411 ("checkout: optimize "git
checkout -b <new_branch>"", 2018-08-16) didn't add the double-colon
needed for the labeled list separator, as a result the added
documentation all got squashed into one paragraph. Fix that by adding
the list separator.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 19 Sep 2018 03:49:07 +0000 (23:49 -0400)]
pack-objects: handle island check for "external" delta base
Two recent topics, jk/pack-delta-reuse-with-bitmap and
cc/delta-islands, can have a funny interaction. When
checking if we can reuse an on-disk delta, the first topic
allows base_entry to be NULL when we find an object that's
not in the packing list. But the latter topic introduces a
call to in_same_island(), which needs to look at
base_entry->idx.oid. When these two features are used
together, we might try to dereference a NULL base_entry.
In practice, this doesn't really happen. We'd generally only
use delta islands when packing to disk, since the whole
point is to optimize the pack for serving fetches later. And
the new delta-reuse code relies on having used reachability
bitmaps to determine the set of objects, which we would
typically only do when serving an actual fetch.
However, it is technically possible to combine these
features. And even without doing so, building with
"SANITIZE=address,undefined" will cause t5310.46 to
complain. Even though that test does not have delta islands
enabled, we still take the address of the NULL entry to pass
to in_same_island(). That function then promptly returns
without dereferencing the value when it sees that islands
are not enabled, but it's enough to trigger a sanitizer
error.
The solution is straight-forward: when both features are
used together, we should pass the oid of the found base to
in_same_island().
This is tricky to do inside a single "if" statement. And
after the merge in f3504ea3dd (Merge branch
'cc/delta-islands', 2018-09-17), that "if" condition is
already getting pretty unwieldy. So this patch moves the
logic into a helper function, where we can easily use
multiple return paths. The result is a bit longer, but the
logic should be much easier to follow.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 17 Sep 2018 20:54:00 +0000 (13:54 -0700)]
Merge branch 'ab/fetch-tags-noclobber'
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
* ab/fetch-tags-noclobber:
fetch: stop clobbering existing tags without --force
fetch: document local ref updates with/without --force
push doc: correct lies about how push refspecs work
push doc: move mention of "tag <tag>" later in the prose
push doc: remove confusing mention of remote merger
fetch tests: add a test for clobbering tag behavior
push tests: use spaces in interpolated string
push tests: make use of unused $1 in test description
fetch: change "branch" to "reference" in --force -h output
Junio C Hamano [Mon, 17 Sep 2018 20:53:59 +0000 (13:53 -0700)]
Merge branch 'es/worktree-forced-ops-fix'
Fix a bug in which the same path could be registered under multiple
worktree entries if the path was missing (for instance, was removed
manually). Also, as a convenience, expand the number of cases in
which --force is applicable.
* es/worktree-forced-ops-fix:
doc-diff: force worktree add
worktree: delete .git/worktrees if empty after 'remove'
worktree: teach 'remove' to override lock when --force given twice
worktree: teach 'move' to override lock when --force given twice
worktree: teach 'add' to respect --force for registered but missing path
worktree: disallow adding same path multiple times
worktree: prepare for more checks of whether path can become worktree
worktree: generalize delete_git_dir() to reduce code duplication
worktree: move delete_git_dir() earlier in file for upcoming new callers
worktree: don't die() in library function find_worktree()
Junio C Hamano [Mon, 17 Sep 2018 20:53:58 +0000 (13:53 -0700)]
Merge branch 'jk/patch-corrupted-delta-fix'
Malformed or crafted data in packstream can make our code attempt
to read or write past the allocated buffer and abort, instead of
reporting an error, which has been fixed.
* jk/patch-corrupted-delta-fix:
t5303: use printf to generate delta bases
patch-delta: handle truncated copy parameters
patch-delta: consistently report corruption
patch-delta: fix oob read
t5303: test some corrupt deltas
test-delta: read input into a heap buffer
Junio C Hamano [Mon, 17 Sep 2018 20:53:58 +0000 (13:53 -0700)]
Merge branch 'jk/pack-objects-with-bitmap-fix'
Hotfix of the base topic.
* jk/pack-objects-with-bitmap-fix:
pack-bitmap: drop "loaded" flag
traverse_bitmap_commit_list(): don't free result
t5310: test delta reuse with bitmaps
bitmap_has_sha1_in_uninteresting(): drop BUG check
Junio C Hamano [Mon, 17 Sep 2018 20:53:57 +0000 (13:53 -0700)]
Merge branch 'jk/cocci'
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
Junio C Hamano [Mon, 17 Sep 2018 20:53:56 +0000 (13:53 -0700)]
Merge branch 'es/format-patch-rangediff'
"git format-patch" learned a new "--range-diff" option to explain
the difference between this version and the previous attempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-rangediff:
format-patch: allow --range-diff to apply to a lone-patch
format-patch: add --creation-factor tweak for --range-diff
format-patch: teach --range-diff to respect -v/--reroll-count
format-patch: extend --range-diff to accept revision range
format-patch: add --range-diff option to embed diff in cover letter
range-diff: relieve callers of low-level configuration burden
range-diff: publish default creation factor
range-diff: respect diff_option.file rather than assuming 'stdout'
projects / rit / log