Orgad Shaneh [Sat, 29 Dec 2018 21:37:59 +0000 (23:37 +0200)]
rebase: run post-checkout hook on checkout
The scripted version of rebase used to run this hook on the initial
checkout. The transition to built-in introduced a regression.
Signed-off-by: Orgad Shaneh <orgads@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Orgad Shaneh [Sat, 29 Dec 2018 21:37:58 +0000 (23:37 +0200)]
t5403: simplify by using a single repository
There is no strong reason to use separate clones to run
these tests; just use a single test repository prepared
with more modern test_commit shell helper function.
While at it, replace three "awk '{print $N}'" on the same
file with shell built-in "read" into three variables.
Signed-off-by: Orgad Shaneh <orgads@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Masaya Suzuki [Sat, 29 Dec 2018 21:19:15 +0000 (13:19 -0800)]
pack-protocol.txt: accept error packets in any context
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.
Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.
Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Masaya Suzuki [Sat, 29 Dec 2018 21:19:14 +0000 (13:19 -0800)]
Use packet_reader instead of packet_read_line
By using and sharing a packet_reader while handling a Git pack protocol
request, the same reader option is used throughout the code. This makes
it easy to set a reader option to the request parsing code.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Wed, 2 Jan 2019 15:38:36 +0000 (07:38 -0800)]
bisect--helper: `bisect_start` shell function partially in C
Reimplement the `bisect_start` shell function partially in C and add
`bisect-start` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
The last part is not converted because it calls another shell function.
`bisect_start` shell function will be completed after the `bisect_next`
shell function is ported in C.
Using `--bisect-start` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and will be called by some
other methods.
Also introduce a method `bisect_append_log_quoted` to keep things short
and crisp.
Note that we are a bit lax about command-line parsing because the helper
is not supposed to be called by the user directly (but only from the git
bisect script).
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Helped-by: Stephan Beyer <s-beyer@gmx.net> Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Wed, 2 Jan 2019 15:38:35 +0000 (07:38 -0800)]
bisect--helper: `get_terms` & `bisect_terms` shell function in C
Reimplement the `get_terms` and `bisect_terms` shell function in C and
add `bisect-terms` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-terms` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.
Also use error() to report "no terms defined" and accordingly change the
test in t6030.
We need to use PARSE_OPT_KEEP_UNKNOWN here to allow for parameters that
look like options (e.g --term-good) but should not be parsed by
cmd_bisect__helper(). This change is safe because all other cmdmodes have
strict argc checks already.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Wed, 2 Jan 2019 15:38:34 +0000 (07:38 -0800)]
bisect--helper: `bisect_next_check` shell function in C
Reimplement `bisect_next_check` shell function in C and add
`bisect-next-check` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
`bisect_voc` shell function is no longer useful now and is replaced by
using a char *[] of "new|bad" and "good|old" values.
Using `--bisect-next-check` is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.
Helped-by: Stephan Beyer <s-beyer@gmx.net> Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Wed, 2 Jan 2019 15:38:33 +0000 (07:38 -0800)]
bisect--helper: `check_and_set_terms` shell function in C
Reimplement the `check_and_set_terms` shell function in C and add
`check-and-set-terms` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--check-and-set-terms` subcommand is a temporary measure to port
shell function in C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired but its
implementation will be called by some other methods.
check_and_set_terms() sets and receives two global variables namely
TERM_GOOD and TERM_BAD in the shell script. Luckily the file BISECT_TERMS
also contains the value of those variables so its appropriate to evoke the
method get_terms() after calling the subcommand so that it retrieves the
value of TERM_GOOD and TERM_BAD from the file BISECT_TERMS. The two
global variables are passed as arguments to the subcommand.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Wed, 2 Jan 2019 15:38:32 +0000 (07:38 -0800)]
bisect--helper: `bisect_write` shell function in C
Reimplement the `bisect_write` shell function in C and add a
`bisect-write` subcommand to `git bisect--helper` to call it from
git-bisect.sh
Using `--bisect-write` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.
Note: bisect_write() uses two variables namely TERM_GOOD and TERM_BAD
from the global shell script thus we need to pass it to the subcommand
using the arguments. We then store them in a struct bisect_terms and
pass the memory address around functions.
Add a log_commit() helper function to write the contents of the commit message
header to a file which will be re-used in future parts of the code as
well.
Also introduce a function free_terms() to free the memory of `struct
bisect_terms` and set_terms() to set the values of members in `struct
bisect_terms`.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Wed, 2 Jan 2019 15:38:31 +0000 (07:38 -0800)]
bisect--helper: `bisect_reset` shell function in C
Reimplement `bisect_reset` shell function in C and add a `--bisect-reset`
subcommand to `git bisect--helper` to call it from git-bisect.sh .
Using `bisect_reset` subcommand is a temporary measure to port shell
functions to C so as to use the existing test suite. As more functions
are ported, this subcommand would be retired but its implementation will
be called by some other method.
Note: --bisect-clean-state subcommand has not been retired as there are
still a function namely `bisect_start()` which still uses this
subcommand.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 2 Jan 2019 09:38:46 +0000 (09:38 +0000)]
banned.h: mark strncat() as banned
strncat() has the same quadratic behavior as strcat() and is
difficult-to-read and bug-prone. While it hasn't yet been a
problem in git iself, strncat() found it's way into 'master'
of cgit and caused segfaults on my system.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Sun, 23 Dec 2018 19:24:35 +0000 (14:24 -0500)]
doc/config: do a better job of introducing 'worktree.guessRemote'
The documentation for this option jumps right in with "With `add`",
without explaining that `add` is a sub-command of "git worktree".
Together with rather odd grammatical structure of the remainder of the
sentence, the description can be difficult for newcomers to understand.
Clarify by improving the grammar and mentioning "git worktree add"
explicitly.
Reported-by: Олег Самойлов <splarv@ya.ru> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 11 Dec 2018 16:11:38 +0000 (08:11 -0800)]
rebase: define linearization ordering and enforce it
Ever since commit 3f213981e44a ("add tests for rebasing merged history",
2013-06-06), t3425 has had tests which included the rebasing of merged
history and whose order of applied commits was checked. Unfortunately,
the tests expected different behavior depending on which backend was in
use. Implementing these checks was the following four lines (including
the TODO message) which were repeated verbatim three times in t3425:
#TODO: make order consistent across all flavors of rebase
test_run_rebase success 'e n o' ''
test_run_rebase success 'e n o' -m
test_run_rebase success 'n o e' -i
As part of the effort to reduce differences between the rebase backends
so that users get more uniform behavior, let's define the correct
behavior and modify the different backends so they all get the right
answer. It turns out that the difference in behavior here is entirely
due to topological sorting; since some backends require topological
sorting (particularly when --rebase-merges is specified), require it for
all modes. Modify the am and merge backends to implement this.
Performance Considerations:
I was unable to measure any appreciable performance difference with this
change. Trying to control the run-to-run variation was difficult; I
eventually found a headless beefy box that I could ssh into, which
seemed to help. Using git.git, I ran the following testcase:
$ git reset --hard v2.20.0-rc1~2
$ time git rebase --quiet v2.20.0-rc0~16
I first ran once to warm any disk caches, then ran five subsequent runs
and recorded the times of those five. I observed the following results
for the average time:
Measurements aside, I would expect the timing for walking revisions to
be dwarfed by the work involved in creating and applying patches, so
this isn't too surprising. Further, while somewhat counter-intuitive,
it is possible that turning on topological sorting is actually a
performance improvement: by way of comparison, turning on --topo-order
made fast-export faster (see
https://public-inbox.org/git/20090211135640.GA19600@coredump.intra.peff.net/).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 11 Dec 2018 16:11:37 +0000 (08:11 -0800)]
git-legacy-rebase: simplify unnecessary triply-nested if
The git-legacy-rebase.sh script previously had code of the form:
if git_am_opt:
if interactive:
if incompatible_opts:
show_error_about_interactive_and_am_incompatibilities
if rebase-merge:
if incompatible_opts
show_error_about_merge_and_am_incompatibilities
which was a triply nested if. However, the first conditional
(git_am_opt) and third (incompatible_opts) were somewhat redundant: the
latter condition was a strict subset of the former. Simplify this by
moving the innermost conditional to the outside, allowing us to remove
the test on git_am_opt entirely and giving us the following form:
if incompatible_opts:
if interactive:
show_error_about_interactive_and_am_incompatibilities
if rebase-merge:
show_error_about_merge_and_am_incompatibilities
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 11 Dec 2018 16:11:36 +0000 (08:11 -0800)]
git-rebase, sequencer: extend --quiet option for the interactive machinery
While 'quiet' and 'interactive' may sound like antonyms, the interactive
machinery actually has logic that implements several
interactive_rebase=implied cases (--exec, --keep-empty, --rebase-merges)
which won't pop up an editor. The rewrite of interactive rebase in C
added a quiet option, though it only turns stats off. Since we want to
make the interactive machinery also take over for git-rebase--merge, it
should fully implement the --quiet option.
git-rebase--interactive was already somewhat quieter than
git-rebase--merge and git-rebase--am, possibly because cherry-pick has
just traditionally been quieter. As such, we only drop a few
informational messages -- "Rebasing (n/m)" and "Successfully rebased..."
Also, for simplicity, remove the differences in how quiet and verbose
options were recorded. Having one be signalled by the presence of a
"verbose" file in the state_dir, while the other was signalled by the
contents of a "quiet" file was just weirdly inconsistent. (This
inconsistency pre-dated the rewrite into C.) Make them consistent by
having them both key off the presence of the file.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 11 Dec 2018 16:11:35 +0000 (08:11 -0800)]
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
The post-rewrite hook is supposed to be invoked for each rewritten
commit. The fact that a commit was selected and processed by the rebase
operation (even though when we hit an error a user said it had no more
useful changes), suggests we should write an entry for it. In
particular, let's treat it as an empty commit trivially squashed into
its parent.
This brings the rebase--am and rebase--merge backends in sync with the
behavior of the interactive rebase backend.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 11 Dec 2018 16:11:34 +0000 (08:11 -0800)]
t5407: add a test demonstrating how interactive handles --skip differently
The post-rewrite hook is documented as being invoked by commands that
rewrite commits such as commit --amend and rebase, and that it will
be called for each rewritten commit.
Apparently, the three backends handled --skip'ed commits differently:
am: treat the skipped commit as though it weren't rewritten
merge: same as 'am' backend
interactive: treat skipped commits as having been rewritten to empty
(view them as an empty fixup to their parent)
For now, just add a testcase documenting the different behavior (use
--keep to force usage of the interactive machinery even though we have
no empty commits). A subsequent commit will remove the inconsistency in
--skip handling.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 11 Dec 2018 16:11:33 +0000 (08:11 -0800)]
rebase: fix incompatible options error message
In commit f57696802c30 ("rebase: really just passthru the `git am`
options", 2018-11-14), the handling of `git am` options was simplified
dramatically (and an option parsing bug was fixed), but it introduced
a small regression in the error message shown when options only
understood by separate backends were used:
$ git rebase --keep --ignore-whitespace
fatal: cannot combine interactive options (--interactive, --exec,
--rebase-merges, --preserve-merges, --keep-empty, --root + --onto) with
am options (.git/rebase-apply/applying)
$ git rebase --merge --ignore-whitespace
fatal: cannot combine merge options (--merge, --strategy,
--strategy-option) with am options (.git/rebase-apply/applying)
Note that in both cases, the list of "am options" is
".git/rebase-apply/applying", which makes no sense. Since the lists of
backend-specific options is documented pretty thoroughly in the rebase
man page (in the "Incompatible Options" section, with multiple links
throughout the document), and since I expect this list to change over
time, just simplify the error message.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 11 Dec 2018 16:11:32 +0000 (08:11 -0800)]
rebase: make builtin and legacy script error messages the same
The conversion of the script version of rebase took messages that were
prefixed with "error:" and passed them along to die(), which adds a
"fatal:" prefix, thus resulting in messages of the form:
fatal: error: cannot combine...
which seems redundant. Remove the "error:" prefix from the builtin
version of rebase, and change the prefix from "error:" to "fatal:" in
the legacy script to match.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Gummerer [Thu, 20 Dec 2018 16:41:50 +0000 (16:41 +0000)]
t5570: drop racy test
t5570 being racy has been reported twice separately on the mailing
list [*1*, *2*].
To make the test race proof, we'd either have to introduce another
fifo the test snippet is waiting on, or somehow convincing "cat" to
flush (and let us know when it has). Which really implies killing the
daemon, and wait()ing on cat to process the EOF and exit. And that
makes the tests a lot more expensive if we have to start the daemon
for each snippet.
As this is a test for a relatively minor fix (according to the author)
in 19136be3f8 ("daemon: fix off-by-one in logging extended
attributes", 2018-01-24), drop it to avoid this racyness. It doesn't
seem worth making the test code much more complex, or slowing down all
tests just to keep this one.
Reported-by: Jan Palus <jpalus@fastmail.com> Reported-by: Torsten Bögershausen <tboegi@web.de> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 4 Dec 2018 22:42:38 +0000 (14:42 -0800)]
revision: use commit graph in get_reference()
When fetching into a repository, a connectivity check is first made by
check_exist_and_connected() in builtin/fetch.c that runs:
git rev-list --objects --stdin --not --all --quiet <(list of objects)
If the client repository has many refs, this command can be slow,
regardless of the nature of the server repository or what is being
fetched. A profiler reveals that most of the time is spent in
setup_revisions() (approx. 60/63), and of the time spent in
setup_revisions(), most of it is spent in parse_object() (approx.
49/60). This is because setup_revisions() parses the target of every ref
(from "--all"), and parse_object() reads the buffer of the object.
Reading the buffer is unnecessary if the repository has a commit graph
and if the ref points to a commit (which is typically the case). This
patch uses the commit graph wherever possible; on my computer, when I
run the above command with a list of 1 object on a many-ref repository,
I get a speedup from 1.8s to 1.0s.
Another way to accomplish this effect would be to modify parse_object()
to use the commit graph if possible; however, I did not want to change
parse_object()'s current behavior of always checking the object
signature of the returned object.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Olga Telezhnaya [Mon, 24 Dec 2018 13:24:30 +0000 (13:24 +0000)]
ref-filter: add deltabase option
Add new formatting option: deltabase.
If the object is stored as a delta on-disk, this expands
to the 40-hex sha1 of the delta base object.
Otherwise, expands to the null sha1 (40 zeroes).
We have same option in cat-file command.
Hopefully, in the end I will remove formatting code from
cat-file and reuse formatting parts from ref-filter.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Sat, 15 Dec 2018 00:09:42 +0000 (16:09 -0800)]
t/helper/test-repository: celebrate independence from the_repository
dade47c06c (commit-graph: add repo arg to graph readers, 2018-07-11)
brought more independence from the_repository to the commit graph, however
it was not completely independent of the_repository, as the previous
patches show.
To ensure we're not accessing the_repository by accident, we'd ideally
assign NULL to the_repository to trigger a segfault on access.
We currently have a temporary hack in cache.h, which relies on
the_hash_algo (which is a short form of the_repository->hash_algo) to
be set, so we cannot do that. The next best thing is to set all fields of
the_repository to 0, so any accidental access is more likely to be found.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Sat, 15 Dec 2018 00:09:41 +0000 (16:09 -0800)]
path.h: make REPO_GIT_PATH_FUNC repository agnostic
git_pathdup uses the_repository internally, but the macro
REPO_GIT_PATH_FUNC is specifically made for arbitrary repositories.
Switch to repo_git_path which works on arbitrary repositories.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Sat, 15 Dec 2018 00:09:38 +0000 (16:09 -0800)]
submodule: don't add submodule as odb for push
In push_submodule(), because we do not actually need access to objects
in the submodule, do not invoke add_submodule_odb().
(for_each_remote_ref_submodule() does not require access to those
objects, and the actual push is done by spawning another process,
which handles object access by itself.)
This code of push_submodule() is exercised in t5531 and continues
to work, showing that the submodule odbc is not needed.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Sat, 15 Dec 2018 00:09:37 +0000 (16:09 -0800)]
submodule: use submodule repos for object lookup
This converts the 'show_submodule_header' function to use
the repository API properly, such that the submodule objects
are not added to the main object store.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Mon, 17 Dec 2018 16:59:57 +0000 (08:59 -0800)]
stripspace: allow -s/-c outside git repository
v2.11.0-rc3~3^2~1 (stripspace: respect repository config, 2016-11-21)
improved stripspace --strip-comments / --comentlines by teaching them
to read repository config, but it went a little too far: when running
stripspace outside any repository, the result is
$ git stripspace --strip-comments <test-input
fatal: not a git repository (or any parent up to mount point /tmp)
That makes experimenting with the stripspace command unnecessarily
fussy. Fix it by discovering the git directory gently, as intended
all along.
Reported-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sun, 16 Dec 2018 14:28:59 +0000 (15:28 +0100)]
git-status.txt: render tables correctly under Asciidoctor
Asciidoctor removes the indentation of each line in these tables, so the
last lines of each table have a completely broken alignment.
Similar to 379805051d ("Documentation: render revisions correctly under
Asciidoctor", 2018-05-06), use an explicit literal block to indicate
that we want to keep the leading whitespace in the tables.
Because this gives us some extra indentation, we can remove the one that
we have been carrying explicitly. That is, drop the first four spaces of
indentation on each line. With Asciidoc (8.6.10), this results in
identical rendering before and after this commit, both for git-status.1
and git-status.html.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sun, 16 Dec 2018 14:28:58 +0000 (15:28 +0100)]
Documentation: do not nest open blocks
It appears we try to nest open blocks, but that does not work well with
Asciidoctor, which fails to indent the inner blocks. As a result, they
do not visually seem to relate (as much) to the preceding paragraph as
they should. Drop the outer blocks to fix the rendering of the inner
ones. Asciidoc renders identically before and after this patch, both
man-pages and html.
This also makes Asciidoctor stop rendering a literal '+' before "Under
--pretty=oneline ..." in the manuals for git-log and git-rev-list.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sun, 16 Dec 2018 14:28:57 +0000 (15:28 +0100)]
git-column.txt: fix section header
We have too few dashes under "Examples", which causes Asciidoctor to not
pick it up as a section header. Instead, it thinks we are starting a
code listing block, which ends up containing the remainder of the
document. The result is quite ugly.
Make sure we have as many dashes as we have characters in "Examples".
Asciidoc renders identically before and after this patch, both man-page
and html.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clone <url> C:\cygwin\home\USER\repo' is working (again)
A regression for cygwin users was introduced with commit 05b458c,
"real_path: resolve symlinks by hand".
In the the commit message we read:
The current implementation of real_path uses chdir() in order to resolve
symlinks. Unfortunately this isn't thread-safe as chdir() affects a
process as a whole...
The old (and non-thread-save) OS calls chdir()/pwd() had been
replaced by a string operation.
The cygwin layer "knows" that "C:\cygwin" is an absolute path,
but the new string operation does not.
The solution is to implement has_dos_drive_prefix(), skip_dos_drive_prefix()
is_dir_sep(), offset_1st_component() and convert_slashes() for cygwin
in the same way as it is done in 'Git for Windows' in compat/mingw.[ch]
Extract the needed code into compat/win32/path-utils.[ch] and use it
for cygwin as well.
Reported-by: Steven Penny <svnpenn@gmail.com> Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Braun [Fri, 14 Dec 2018 18:49:12 +0000 (19:49 +0100)]
log -G: ignore binary files
The -G<regex> option of log looks for the differences whose patch text
contains added/removed lines that match regex.
Currently -G looks also into patches of binary files (which
according to [1]) is binary as well.
This has a couple of issues:
- It makes the pickaxe search slow. In a proprietary repository of the
author with only ~5500 commits and a total .git size of ~300MB
searching takes ~13 seconds
$time git log -Gwave > /dev/null
real 0m13,241s
user 0m12,596s
sys 0m0,644s
whereas when we ignore binary files with this patch it takes ~4s
$time ~/devel/git/git log -Gwave > /dev/null
real 0m3,713s
user 0m3,608s
sys 0m0,105s
which is a speedup of more than fourfold.
- The internally used algorithm for generating patch text is based on
xdiff and its states in [1]
> The output format of the binary patch file is proprietary
> (and binary) and it is basically a collection of copy and insert
> commands [..]
which means that the current format could change once the internal
algorithm is changed as the format is not standardized. In addition
the git binary patch format used for preparing patches for git apply
is *different* from the xdiff format as can be seen by comparing
To resolve these issues this patch makes -G<regex> ignore binary files
by default. Textconv filters are supported and also -a/--text for
getting the old and broken behaviour back.
The -S<block of text> option of log looks for differences that changes
the number of occurrences of the specified block of text (i.e.
addition/deletion) in a file. As we want to keep the current behaviour,
add a test to ensure it stays that way.
[1]: http://www.xmailserver.org/xdiff.html
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sergey Organov [Fri, 14 Dec 2018 04:53:51 +0000 (07:53 +0300)]
cherry-pick: do not error on non-merge commits when '-m 1' is specified
When cherry-picking multiple commits, it's impossible to have both
merge- and non-merge commits on the same command-line. Not specifying
'-m 1' results in cherry-pick refusing to handle merge commits, while
specifying '-m 1' fails on non-merge commits.
This patch allows '-m 1' for non-merge commits. As mainline is always
the only parent for a non-merge commit, it makes little sense to
disable it.
Signed-off-by: Sergey Organov <sorganov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Fri, 14 Dec 2018 23:59:45 +0000 (15:59 -0800)]
submodule deinit: unset core.worktree
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it. As we covered the only other case in
which a submodule loses its working tree in the earlier step
(i.e. switching branches of top-level project to move to a commit that did
not have the submodule), this makes the code always maintain
core.worktree correctly unset when there is no working tree
for a submodule.
This re-introduces 984cd77ddb (submodule deinit: unset core.worktree,
2018-06-18), which was reverted as part of f178c13fda (Revert "Merge
branch 'sb/submodule-core-worktree'", 2018-09-07)
The whole series was reverted as the offending commit e98317508c
(submodule: ensure core.worktree is set after update, 2018-06-18)
was relied on by other commits such as 984cd77ddb.
Keep the offending commit reverted, but its functionality came back via 4d6d6ef1fc (Merge branch 'sb/submodule-update-in-c', 2018-09-17), such
that we can reintroduce 984cd77ddb now.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Fri, 14 Dec 2018 23:59:43 +0000 (15:59 -0800)]
submodule: unset core.worktree if no working tree is present
When a submodules work tree is removed, we should unset its core.worktree
setting as the worktree is no longer present. This is not just in line
with the conceptual view of submodules, but it fixes an inconvenience
for looking at submodules that are not checked out:
git clone --recurse-submodules git://github.com/git/git && cd git &&
git checkout --recurse-submodules v2.13.0
git -C .git/modules/sha1collisiondetection log
fatal: cannot chdir to '../../../sha1collisiondetection': \
No such file or directory
With this patch applied, the final call to git log works instead of dying
in its setup, as the checkout will unset the core.worktree setting such
that following log will be run in a bare repository.
This patch covers all commands that are in the unpack machinery, i.e.
checkout, read-tree, reset. A follow up patch will address
"git submodule deinit", which will also make use of the new function
submodule_unset_core_worktree(), which is why we expose it in this patch.
This patch was authored as 4fa4f90ccd (submodule: unset core.worktree if
no working tree is present, 2018-06-12), which was reverted as part of f178c13fda (Revert "Merge branch 'sb/submodule-core-worktree'",
2018-09-07). The revert was needed as the nearby commit e98317508c
(submodule: ensure core.worktree is set after update, 2018-06-18) is
faulty and at the time of 7e25437d35 (Merge branch
'sb/submodule-core-worktree', 2018-07-18) we could not revert the faulty
commit only, as they were depending on each other: If core.worktree is
unset, we have to have ways to ensure that it is set again once
the working tree reappears again.
Now that 4d6d6ef1fc (Merge branch 'sb/submodule-update-in-c', 2018-09-17),
specifically 74d4731da1 (submodule--helper: replace
connect-gitdir-workingtree by ensure-core-worktree, 2018-08-13) is
present, we already check and ensure core.worktree is set when
populating a new work tree, such that we can re-introduce the commits
that unset core.worktree when removing the worktree.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Fri, 14 Dec 2018 23:59:42 +0000 (15:59 -0800)]
submodule update: add regression test with old style setups
As f178c13fda (Revert "Merge branch 'sb/submodule-core-worktree'",
2018-09-07) was produced shortly before a release, nobody asked for
a regression test to be included. Add a regression test that makes sure
that the invocation of `git submodule update` on old setups doesn't
produce errors as pointed out in f178c13fda.
The place to add such a regression test may look odd in t7412, but
that is the best place as there we setup old style submodule setups
explicitly.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 15 Dec 2018 04:00:25 +0000 (13:00 +0900)]
Sync with Git 2.20.1
* maint:
Git 2.20.1
.gitattributes: ensure t/oid-info/* has eol=lf
t9902: 'send-email' test case requires PERL
t4256: mark support files as LF-only
parse-options: fix SunCC compiler warning
help -a: handle aliases with long names gracefully
help.h: fix coding style
run-command: report exec failure
Derrick Stolee [Tue, 11 Dec 2018 20:35:46 +0000 (12:35 -0800)]
.gitattributes: ensure t/oid-info/* has eol=lf
The new test_oid machinery in the test library requires reading
some information from t/oid-info/hash-info and t/oid-info/oid.
The logic to read from these files in shell uses built-in "read"
command, which leaves CR at the end of these text files when they
are checked out with CRLF line endings, at least when run with bash
shipped with Git for Windows. This results in an unexpected value
in the variable these lines are read into, leading the tests to
fail.
Mark them to be checked out always with the LF line endings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The oneline notwithstanding, 13374987dd (completion: use _gitcompbuiltin
for format-patch, 2018-11-03) changed also the way send-email options
are completed, by asking the git send-email command itself what options
it offers.
Necessarily, this must fail when built with NO_PERL because send-email
itself is a Perl script. Which means that we need the PERL prerequisite
for the send-email test case in t9902.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 13 Dec 2018 19:02:48 +0000 (11:02 -0800)]
submodule update: run at most one fetch job unless otherwise set
In a028a1930c (fetching submodules: respect `submodule.fetchJobs`
config option, 2016-02-29), we made sure to keep the default
behavior of fetching at most one submodule at once when not setting
the newly introduced `submodule.fetchJobs` config.
This regressed in 90efe595c5 (builtin/submodule--helper: factor
out submodule updating, 2018-08-03). Fix it.
Reported-by: Sjon Hortensius <sjon@parse.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test t4256-am-format-flowed.sh requires carefully applying a
patch after ignoring padding whitespace. This breaks if the file
is munged to include CRLF line endings instead of LF.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compiler reports this because show_gitcomp() never actually
returns a value:
"parse-options.c", line 520: warning: Function has no return
statement : show_gitcomp
We could shut the compiler up. But instead let's not bury exit() too
deep. Do the same as internal -h handling, return a special error code
and handle the exit() in parse_options() (and other
parse_options_step() callers) instead.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help -a: handle aliases with long names gracefully
We take pains to determine the longest command beforehand, so that we
can align the category column after printing the command names.
However, then we re-use that value when printing the aliases. If any
alias name is longer than the longest command name, we consequently try
to add a negative number of spaces (but `mput_char()` does not expect
any negative values and simply decrements until the value is 0, i.e.
it tries to add close to 2**31 spaces).
Let's fix this by adjusting the `longest` variable before printing the
aliases.
This fixes https://github.com/git-for-windows/git/issues/1975.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 11 Dec 2018 05:46:07 +0000 (14:46 +0900)]
run-command: report exec failure
In 321fd823 ("run-command: mark path lookup errors with ENOENT",
2018-10-24), we rewrote the logic to execute a command by looking
in the directories on $PATH; as a side effect, a request to run a
command that is not found on $PATH is noticed even before a child
process is forked to execute it.
We however stopped to report an exec failure in such a case by
mistake. Add a logic to report the error unless silent-exec-failure
is requested, to match the original code.
Reported-by: John Passaro <john.a.passaro@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: introduce a shortcut for --reschedule-failed-exec
It is a bit cumbersome to write out the `--reschedule-failed-exec`
option before `-x <cmd>` all the time; let's introduce a convenient
option to do both at the same time: `-y <cmd>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: add a config option to default to --reschedule-failed-exec
It would be cumbersome to type out that option all the time, so let's
offer the convenience of a config setting: rebase.rescheduleFailedExec.
Besides, this opens the door to changing the default in a future version
of Git: it does make some sense to reschedule failed `exec` commands by
default (and if we could go back in time when the `exec` command was
invented, we probably would change that default right from the start).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kyle Meyer [Sat, 8 Dec 2018 23:15:41 +0000 (18:15 -0500)]
rebase docs: drop stray word in merge command description
Delete a misplaced word introduced by caafecfcf1 (rebase
--rebase-merges: adjust man page for octopus support, 2018-03-09).
Signed-off-by: Kyle Meyer <kyle@kyleam.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We indent with TABs and sometimes for fine alignment, TABs followed by
spaces, but never all spaces (unless the indentation is less than 8
columns). Indenting with spaces slips through in some places. Fix
them.
Imported code and compat/ are left alone on purpose. The former should
remain as close as upstream as possible. The latter pretty much has
separate maintainers, it's up to them to decide.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denis Ovsienko [Thu, 6 Dec 2018 13:10:24 +0000 (13:10 +0000)]
docs: fix $strict_export text in gitweb.conf.txt
The section discusses $gitweb_export_ok and $gitweb_list, but gitweb
Perl code does not have such variables (this likely hangs over from
GITWEB_EXPORT_OK and GITWEB_LIST respectively). Fix the section to
spell $export_ok and $projects_list like the rest of the document.
Signed-off-by: Denis Ovsienko <denis@ovsienko.info> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frank Dana [Sat, 8 Dec 2018 00:26:09 +0000 (00:26 +0000)]
docs/gitweb.conf: config variable typo
The documentation for the feature 'snapshot' claimed
"This feature can be configured on a per-repository basis via
repository's `gitweb.blame` configuration variable"
Fixed to specify `gitweb.snapshot` as the variable name.
Signed-off-by: Frank Dana <ferdnyc@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Thu, 6 Dec 2018 21:26:55 +0000 (13:26 -0800)]
fetch: ensure submodule objects fetched
Currently when git-fetch is asked to recurse into submodules, it dispatches
a plain "git-fetch -C <submodule-dir>" (with some submodule related options
such as prefix and recusing strategy, but) without any information of the
remote or the tip that should be fetched.
But this default fetch is not sufficient, as a newly fetched commit in
the superproject could point to a commit in the submodule that is not
in the default refspec. This is common in workflows like Gerrit's.
When fetching a Gerrit change under review (from refs/changes/??), the
commits in that change likely point to submodule commits that have not
been merged to a branch yet.
Fetch a submodule object by id if the object that the superproject
points to, cannot be found. For now this object is fetched from the
'origin' remote as we defer getting the default remote to a later patch.
A list of new submodule commits are already generated in certain
conditions (by check_for_new_submodule_commits()); this new feature
invokes that function in more situations.
The submodule checks were done only when a ref in the superproject
changed, these checks were extended to also be performed when fetching
into FETCH_HEAD for completeness, and add a test for that too.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Fri, 7 Dec 2018 17:51:20 +0000 (18:51 +0100)]
git-rebase.txt: update note about directory rename detection and am
In commit 6aba117d5cf7 ("am: avoid directory rename detection when
calling recursive merge machinery", 2018-08-29), the git-rebase manpage
probably should have also been updated to note the stronger
incompatibility between git-am and directory rename detection. Update
it now.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthew DeVore [Mon, 3 Dec 2018 22:10:19 +0000 (14:10 -0800)]
revision.c: put promisor option in specialized struct
Put the allow_exclude_promisor_objects flag in setup_revision_opt. When
it was in rev_info, it was unclear when it was used, since rev_info is
passed to functions that don't use the flag. This resulted in
unnecessary setting of the flag in prune.c, so fix that as well.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthew DeVore [Wed, 5 Dec 2018 21:43:46 +0000 (13:43 -0800)]
list-objects.c: don't segfault for missing cmdline objects
When a command is invoked with both --exclude-promisor-objects,
--objects-edge-aggressive, and a missing object on the command line,
the rev_info.cmdline array could get a NULL pointer for the value of
an 'item' field. Prevent dereferencing of a NULL pointer in that
situation.
Properly handle --ignore-missing. If it is not passed, die when an
object is missing. Otherwise, just silently ignore it.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Thu, 29 Nov 2018 00:27:55 +0000 (16:27 -0800)]
submodule.c: fetch in submodules git directory instead of in worktree
Keep the properties introduced in 10f5c52656 (submodule: avoid
auto-discovery in prepare_submodule_repo_env(), 2016-09-01), by fixating
the git directory of the submodule.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Thu, 29 Nov 2018 00:27:54 +0000 (16:27 -0800)]
submodule: migrate get_next_submodule to use repository structs
We used to recurse into submodules, even if they were broken having
only an objects directory. The child process executed in the submodule
would fail though if the submodule was broken. This is tested via
"fetching submodule into a broken repository" in t5526.
This patch tightens the check upfront, such that we do not need
to spawn a child process to find out if the submodule is broken.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Thu, 29 Nov 2018 00:27:53 +0000 (16:27 -0800)]
repository: repo_submodule_init to take a submodule struct
When constructing a struct repository for a submodule for some revision
of the superproject where the submodule is not contained in the index,
it may not be present in the working tree currently either. In that
situation giving a 'path' argument is not useful. Upgrade the
repo_submodule_init function to take a struct submodule instead.
The submodule struct can be obtained via submodule_from_{path, name} or
an artificial submodule struct can be passed in.
While we are at it, rename the repository struct in the repo_submodule_init
function, which is to be initialized, to a name that is not confused with
the struct submodule as easily. Perform such renames in similar functions
as well.
Also move its documentation into the header file.
Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Thu, 29 Nov 2018 00:27:52 +0000 (16:27 -0800)]
submodule: store OIDs in changed_submodule_names
'calculate_changed_submodule_paths' uses a local list to compute the
changed submodules, and then produces the result by copying appropriate
items into the result list.
Instead use the result list directly and prune items afterwards
using string_list_remove_empty_items.
By doing so we'll have access to the util pointer for longer that
contains the commits that we need to fetch, which will be
useful in a later patch.
Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Thu, 29 Nov 2018 00:27:50 +0000 (16:27 -0800)]
submodule.c: sort changed_submodule_names before searching it
We can string_list_insert() to maintain sorted-ness of the
list as we find new items, or we can string_list_append() to
build an unsorted list and sort it at the end just once.
As we do not rely on the sortedness while building the
list, we pick the "append and sort at the end" as it
has better worst case execution times.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Beller [Mon, 3 Dec 2018 22:37:13 +0000 (14:37 -0800)]
sideband: color lines with keyword only
When bf1a11f0a1 (sideband: highlight keywords in remote sideband output,
2018-08-07) was introduced, it was carefully considered which strings
would be highlighted. However 59a255aef0 (sideband: do not read beyond
the end of input, 2018-08-18) brought in a regression that the original
did not test for. A line containing only the keyword and nothing else
("SUCCESS") should still be colored.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / rit / log