Christian Couder [Fri, 10 Jul 2020 16:47:38 +0000 (18:47 +0200)]
t6300: test refs pointing to tree and blob
Adding tests for refs pointing to tree and blob shows that
we care about testing both positive ("see, my shiny new toy
does work") and negative ("and it won't do nonsensical
things when given an input it is not designed to work with")
cases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 9 Jul 2020 20:39:09 +0000 (16:39 -0400)]
t5539: make timestamp requirements more explicit
The test for "no shallow lines after receiving ACK ready" is very
sensitive to the timestamps of the commits we create. It's looking for
the fetch negotiation to send a "ready", which in turn depends on the
order in which we traverse commits during the negotiation.
It works reliably now because the base commit "7" is created without
test_commit, and thus gets a commit time matching the current system
clock. Whereas the new commits created in this test do use test_commit,
and get the usual test_tick time from 2005. So the fetch into the
"clone" repository results in a commit graph like this (I omitted some
of the "unrelated" commits for clarity; they're all just a sequence of
test_ticks):
- "7" is way in the future compared to the other commits
- "new-too" in the fetching repo is older than "new" (and its
"unrelated" ancestors) in the shallow repo
If we change our "setup shallow clone" step to use test_tick, too (and
get rid of the dependency on the system clock), then the test will fail.
The resulting graph looks like this:
Our "new-too" is still older than "new" and "unrelated", but now "7" is
older than all of them (because it advanced test_tick, which the other
tests built on top of). In the original, we advertised "7" as the first
"have" before anything else, but now "new-too" is more recent. You'd see
the same thing in the unlikely event that the system clock was set
before our test_tick default in 2005.
Let's make the timing requirements more explicit. The important thing is
that the client advertise all of its shared commits first, before
presenting its unique "new-too" commit. We can do that and get rid of
the system clock dependency at the same time by creating all of the
shared commits around time X (using test_tick), and then creating
"new-too" with some time long before X. The resulting graph looks like
this:
That also lets us get rid of the hacky test_tick added by f0e802ca20
(t5539: update a flaky test, 2014-07-14). That was clearly dancing
around the same problem, but only addressed the relationship between
commits created in the two subshells (which did use test_tick, but
overlapped because increments of test_tick in subshells are lost). Now
that we're using consistent and well-placed times for both lines of
history, we don't have to care about a one-tick difference between the
two sides.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 9 Jul 2020 20:35:50 +0000 (16:35 -0400)]
t9700: loosen ident timezone regex
A few of the perl tests in t9700 ask for the author and committer ident,
and then make sure we get something sensible. For the timestamp portion,
we just match [0-9]+, because the actual value will depend on when the
test is run. However, we do require that the timezone be "+0000". This
works reliably because we set $TZ in test-lib.sh. But in preparation for
changing the default timezone, let's be a bit more flexible. We don't
actually care about the exact value here, just that we were able to get
a sensible output from the perl module's access methods.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ben Wijen [Fri, 10 Jul 2020 08:47:32 +0000 (10:47 +0200)]
git clone: don't clone into non-empty directory
When using git clone with --separate-git-dir realgitdir and
realgitdir already exists, it's content is destroyed.
So, make sure we don't clone into an existing non-empty directory.
When d45420c1 (clone: do not clean up directories we didn't create,
2018-01-02) tightened the clean-up procedure after a failed cloning
into an empty directory, it assumed that the existing directory
given is an empty one so it is OK to keep that directory, while
running the clean-up procedure that is designed to remove everything
in it (since there won't be any, anyway). Check and make sure that
the $GIT_DIR is empty even cloning into an existing repository.
Signed-off-by: Ben Wijen <ben@wijen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Jul 2020 21:00:44 +0000 (14:00 -0700)]
Merge branch 'jn/eject-fetch-write-commit-graph-out-of-experimental' into master
"fetch.writeCommitGraph" was enabled when "feature.experimental" is
asked for, but it was found to be a bit too risky even for bold
folks in its current shape. The configuration has been ejected, at
least for now, from the "experimental" feature set.
* jn/eject-fetch-write-commit-graph-out-of-experimental:
experimental: default to fetch.writeCommitGraph=false
Junio C Hamano [Thu, 9 Jul 2020 21:00:44 +0000 (14:00 -0700)]
Merge branch 'tb/fix-persistent-shallow' into master
When "fetch.writeCommitGraph" configuration is set in a shallow
repository and a fetch moves the shallow boundary, we wrote out
broken commit-graph files that do not match the reality, which has
been corrected.
* tb/fix-persistent-shallow:
commit.c: don't persist substituted parents when unshallowing
Junio C Hamano [Thu, 9 Jul 2020 21:00:42 +0000 (14:00 -0700)]
Merge branch 'rs/line-log-until' into master
"git log -Lx,y:path --before=date" lost track of where the range
should be because it didn't take the changes made by the youngest
commits that are omitted from the output into account.
* rs/line-log-until:
revision: disable min_age optimization with line-log
Junio C Hamano [Thu, 9 Jul 2020 21:00:42 +0000 (14:00 -0700)]
Merge branch 'ra/send-email-in-reply-to-from-command-line-wins' into master
"git send-email --in-reply-to=<msg>" did not use the In-Reply-To:
header with the value given from the command line, and let it be
overridden by the value on In-Reply-To: header in the messages
being sent out (if exists).
Junio C Hamano [Thu, 9 Jul 2020 21:00:41 +0000 (14:00 -0700)]
Merge branch 'vs/completion-with-set-u' into master
The command line completion support (in contrib/) used to be
prepared to work with "set -u" but recent changes got a bit more
sloppy. This has been corrected.
Martin Ågren [Thu, 9 Jul 2020 18:24:38 +0000 (20:24 +0200)]
git-rebase.txt: fix description list separator
We don't give a "::" for the list separator, but just a single ":". This
ends up rendering literally, "--apply: Use applying strategies ...". As
a follow-on error, the list continuation, "+", also ends up rendering
literally (because we don't have a list).
This was introduced in 52eb738d6b ("rebase: add an --am option",
2020-02-15) and survived the rename in 10cdb9f38a ("rebase: rename the
two primary rebase backends", 2020-02-15).
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Thu, 9 Jul 2020 17:00:03 +0000 (19:00 +0200)]
commit-graph: fix "Writing out commit graph" progress counter
76ffbca71a (commit-graph: write Bloom filters to commit graph file,
2020-04-06) added two delayed progress lines to writing the Bloom
filter index and data chunk. This is wrong, because a single common
progress is used while writing all chunks, which is not updated while
writing these two new chunks, resulting in incomplete-looking "done"
lines:
Expanding reachable commits in commit graph: 888679, done.
Computing commit changed paths Bloom filters: 100% (888678/888678), done.
Writing out commit graph in 6 passes: 66% (3554712/5332068), done.
Use the common 'struct progress' instance while writing the Bloom
filter chunks as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Thu, 9 Jul 2020 16:54:32 +0000 (18:54 +0200)]
commit-graph: fix progress of reachable commits
To display a progress line while iterating over all refs, d335ce8f24 (commit-graph.c: show progress of finding reachable
commits, 2020-05-13) should have added a pair of
start_delayed_progress() and stop_progress() calls around a
for_each_ref() invocation. Alas, the stop_progress() call ended up at
the wrong place, after write_commit_graph(), which does all the
commit-graph computation and writing, and has several progress lines
of its own. Consequently, that new
Collecting referenced commits: 123
progress line is overwritten by the first progress line shown by
write_commit_graph(), and its final "done" line is shown last, after
everything is finished:
Move that stop_progress() call to the right place.
While at it, drop the unnecessary 'if (data.progress)' condition
protecting the stop_progress() call, because that function is prepared
to handle a NULL progress struct.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 11179eb311 ("entry.c: check if file exists after checkout",
2017-10-05) we started checking the result of the lstat() call done
after writing a file, to avoid writing garbage to the corresponding
cache entry. However, the code skips calling lstat() if it's possible
to use fstat() when it still has the file descriptor open. And when
calling fstat() we don't do the same error checking. To fix that, let
the callers of fstat_output() know when fstat() fails. In this case,
write_entry() will try to use lstat() and properly report an error if
that fails as well.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 9 Jul 2020 02:16:48 +0000 (02:16 +0000)]
git-log.txt: include rev-list-description.txt
The `git log` synopsis mentions `<revision range>`, and the description
of this option links to gitrevisions(7), but a nice explanation of
how a revision range can be constructed from individual commits,
optionnally prefixed with `^`, also exists in `rev-list-description.txt`.
Include this description in the man page for `git log`.
Add Asciidoc 'ifdef's to `rev-list-description.txt` so that either `git
rev-list` or `git log` appears in the respective man pages.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 9 Jul 2020 02:16:45 +0000 (02:16 +0000)]
git-rev-list.txt: fix Asciidoc syntax
Using '{caret}' inside double quotes and immediately following with a
single quoted word does not create the desired output: '<commit1>'
appears verbatim instead of being emphasized.
Use a litteral caret ('^') instead.
Also, remove the leading tabs in shell examples to bring them more in
line with the rest of the documentation.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 9 Jul 2020 02:16:43 +0000 (02:16 +0000)]
git-log.txt: add links to 'rev-list' and 'diff' docs
Add links to the documentation for `git rev-list` and `git diff`
instead of simply mentioning them, to make it easier for readers to reach
these documentation pages. Let's link to `git diff` as this is the
porcelain command, and the rest of the family (`diff-index`, `diff-tree` and
`diff-files`) are mentioned in the "Raw output format" section of the
`git diff` documentation.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 7 Jul 2020 06:20:39 +0000 (23:20 -0700)]
experimental: default to fetch.writeCommitGraph=false
The fetch.writeCommitGraph feature makes fetches write out a commit
graph file for the newly downloaded pack on fetch. This improves the
performance of various commands that would perform a revision walk and
eventually ought to be the default for everyone. To prepare for that
future, it's enabled by default for users that set
feature.experimental=true to experience such future defaults.
Alas, for --unshallow fetches from a shallow clone it runs into a
snag: by the time Git has fetched the new objects and is writing a
commit graph, it has performed a revision walk and r->parsed_objects
contains information about the shallow boundary from *before* the
fetch. The commit graph writing code is careful to avoid writing a
commit graph file in shallow repositories, but the new state is not
shallow, and the result is that from that point on, commands like "git
log" make use of a newly written commit graph file representing a
fictional history with the old shallow boundary.
We could fix this by making the commit graph writing code more careful
to avoid writing a commit graph that could have used any grafts or
shallow state, but it is possible that there are other pieces of
mutated state that fetch's commit graph writing code may be relying
on. So disable it in the feature.experimental configuration.
Google developers have been running in this configuration (by setting
fetch.writeCommitGraph=false in the system config) to work around this
bug since it was discovered in April. Once the fix lands, we'll
enable fetch.writeCommitGraph=true again to give it some early testing
before rolling out to a wider audience.
In other words:
- this patch only affects behavior with feature.experimental=true
- it makes feature.experimental match the configuration Google has
been using for the last few months, meaning it would leave users in
a better tested state than without it
- this should improve testing for other features guarded by
feature.experimental, by making feature.experimental safer to use
Reported-by: Jay Conrod <jayconrod@google.com> Helped-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 8 Jul 2020 21:10:53 +0000 (17:10 -0400)]
commit.c: don't persist substituted parents when unshallowing
Since 37b9dcabfc (shallow.c: use '{commit,rollback}_shallow_file',
2020-04-22), Git knows how to reset stat-validity checks for the
$GIT_DIR/shallow file, allowing it to change between a shallow and
non-shallow state in the same process (e.g., in the case of 'git fetch
--unshallow').
However, when $GIT_DIR/shallow changes, Git does not alter or remove any
grafts (nor substituted parents) in memory.
This comes up in a "git fetch --unshallow" with fetch.writeCommitGraph
set to true. Ordinarily in a shallow repository (and before 37b9dcabfc,
even in this case), commit_graph_compatible() would return false,
indicating that the repository should not be used to write a
commit-graphs (since commit-graph files cannot represent a shallow
history). But since 37b9dcabfc, in an --unshallow operation that check
succeeds.
Thus even though the repository isn't shallow any longer (that is, we
have all of the objects), the in-core representation of those objects
still has munged parents at the shallow boundaries. When the
commit-graph write proceeds, we use the incorrect parentage, producing
wrong results.
There are two ways for a user to work around this: either (1) set
'fetch.writeCommitGraph' to 'false', or (2) drop the commit-graph after
unshallowing.
One way to fix this would be to reset the parsed object pool entirely
(flushing the cache and thus preventing subsequent reads from modifying
their parents) after unshallowing. That would produce a problem when
callers have a now-stale reference to the old pool, and so this patch
implements a different approach. Instead, attach a new bit to the pool,
'substituted_parent', which indicates if the repository *ever* stored a
commit which had its parents modified (i.e., the shallow boundary
prior to unshallowing).
This bit needs to be sticky because all reads subsequent to modifying a
commit's parents are unreliable when unshallowing. Modify the check in
'commit_graph_compatible' to take this bit into account, and correctly
avoid generating commit-graphs in this case, thus solving the bug.
Helped-by: Derrick Stolee <dstolee@microsoft.com> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Reported-by: Jay Conrod <jayconrod@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 8 Jul 2020 04:38:19 +0000 (00:38 -0400)]
diff: check for merge bases before assigning sym->base
In symdiff_prepare(), we iterate over the set of parsed objects to pick
out any symmetric differences, including the left, right, and base
elements. We assign the results into pointers in a "struct symdiff", and
then complain if we didn't find a base, like so:
sym->left = rev->pending.objects[lpos].name;
sym->right = rev->pending.objects[rpos].name;
sym->base = rev->pending.objects[basepos].name;
if (basecount == 0)
die(_("%s...%s: no merge base"), sym->left, sym->right);
But the least lines are backwards. If basecount is 0, then basepos will
be -1, and we will access memory outside of the pending array. This
isn't usually that big a deal, since we don't do anything besides a
single pointer-sized read before exiting anyway, but it does violate the
C standard, and of course memory-checking tools like ASan complain.
Let's put the basecount check first. Note that we haveto split it from
the other assignments, since the die() relies on sym->left and
sym->right having been assigned (this isn't strictly necessary, but is
easier to read than dereferencing the pending array again).
Reported-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 7 Jul 2020 21:41:51 +0000 (17:41 -0400)]
t6000: use test_tick consistently
The first two commits created in t6000 are done without test_tick,
meaning they use the current system clock. After that, we create one
with test_tick, which means it uses a deterministic time in the past.
The result of the "symleft flag bit is propagated down from tag" test
relies on the output order of commits from git-log, which in turn
depends on these timestamps. So this test is technically dependent on
the system clock time, though in practice it would only matter if your
system clock was set before test_tick's default time (which is in 2005).
However, let's use test_tick consistently for those early commits (and
update the expected output to match). This makes the test deterministic,
which is in turn easier to reason about and debug.
Note that there's also a fourth commit here, and it does not use
test_tick. It does have a deterministic timestamp because of the prior
use of test_tick in the script, but it will always be the same time as
the third commit. Let's use test_tick here, too, for consistency. The
matching timestamps between the third and fourth commit are not an
important part of the test.
We could also use test_commit in all of these cases, as it runs
test_tick under the hood. But it would be awkward to do so, as these
tests diverge from the usual test_commit patterns (e.g., by creating
multiple files in a single commit).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 7 Jul 2020 06:04:38 +0000 (02:04 -0400)]
test-lib-functions: restrict test_must_fail usage
In previous commits, we removed the usage of test_must_fail() for most
commands except for a set of pre-approved commands. Since that's done,
only allow test_must_fail() to run those pre-approved commands.
Obviously, we should allow `git`.
We allow `__git*` as some completion functions return an error code that
comes from a git invocation. It's good to avoid using test_must_fail
unnecessarily but it wouldn't hurt to err on the side of caution when
we're potentially wrapping a git command (like in these cases).
We also allow `test-tool` and `test-svn-fe` because these are helper
commands that are written by us and we want to catch their failure.
Finally, we allow `test_terminal` because `test_terminal` just wraps
around git commands. Also, we cannot rewrite
`test_must_fail test_terminal` as `test_terminal test_must_fail` because
test_must_fail() is a shell function and as a result, it cannot be
invoked from the test-terminal Perl script.
We opted to explicitly list the above tools instead of using a catch-all
such as `test[-_]*` because we want to be as restrictive as possible so
that in the future, someone would not accidentally introduce an
unrelated usage of test_must_fail() on an "unapproved" command.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 7 Jul 2020 22:08:07 +0000 (18:08 -0400)]
t9400: don't use test_must_fail with cvs
We are using `test_must_fail cvs` to test that the cvs command fails as
expected. However, test_must_fail() is used to ensure that commands fail
in an expected way, not due to something like a segv. Since we are not
in the business of verifying the sanity of the external world, replace
`test_must_fail cvs` with `! cvs` and assume that the cvs command does
not die unexpectedly.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wait for child on signal death for aliases to externals
When we are running an alias to an external command, we want to wait for
that process to exit even after receiving ^C which normally kills the
git process. This is useful when the process is ignoring SIGINT (which
e.g. pagers often do), and then we don't want it to be killed.
Having an alias which invokes a pager is probably not common, but it can
be useful e.g. if you have an alias to a git command which uses a
subshell as one of the arguments (in which case you have to use an
external command, not an alias to a builtin).
This patch is similar to the previous commit, but the previous commit
fixed this only for aliases to builtins, while this commit does the same
for aliases to external commands. In addition to waiting after clean
like the previous commit, this also enables cleaning the child (that was
already enabled for aliases to builtins before the previous commit),
because wait_after_clean relies on it. Lastly, while the previous commit
fixed a regression, I don't think this has ever worked properly.
Signed-off-by: Trygve Aaberge <trygveaa@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wait for child on signal death for aliases to builtins
When you hit ^C all the processes in the tree receives it. When a git
command uses a pager, git ignores this and waits until the pager quits.
However, when using an alias there is an additional process in the tree
which didn't ignore the signal. That caused it to exit which in turn
caused the pager to exit. This fixes that for aliases to builtins.
This was originally fixed in 46df6906 (execv_dashed_external: wait
for child on signal death, 2017-01-06), but was broken by ee4512ed
(trace2: create new combined trace facility, 2019-02-22) and then b9140840 (git: avoid calling aliased builtins via their dashed form,
2019-07-29).
Signed-off-by: Trygve Aaberge <trygveaa@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 7 Jul 2020 06:04:37 +0000 (02:04 -0400)]
t9834: remove use of `test_might_fail p4`
The test_must_fail() family of functions (including test_might_fail())
should only be used on git commands. Replace test_might_fail() with
a compound command wrapping the old p4 invocation that always returns 0.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 7 Jul 2020 06:04:36 +0000 (02:04 -0400)]
t7107: don't use test_must_fail()
We had a `test_must_fail verify_expect`. However, the git command in
verify_expect() was not expected to fail; the test_cmp() was the failing
command. Be more precise about testing failure by accepting an optional
first argument of '!' which causes the result of the file comparison to
be negated.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future, we plan on only allowing `test_might_fail` to work on a
restricted subset of commands, including `git`. Reorder the commands so
that `run_with_limited_open_files` comes before `test_might_fail`. This
way, `test_might_fail` operates on a git command.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 7 Jul 2020 06:04:34 +0000 (02:04 -0400)]
t3701: stop using `env` in force_color()
In a future patch, we plan on making the test_must_fail()-family of
functions accept only git commands. Even though force_color() wraps an
invocation of `env git`, test_must_fail() will not be able to figure
this out since it will assume that force_color() is just some random
function which is disallowed.
Instead of using `env` in force_color() (which does not support shell
functions), export the environment variables in a subshell. Write the
invocation as `force_color test_must_fail git ...` since shell functions
are now supported.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 7 Jul 2020 05:09:18 +0000 (22:09 -0700)]
Merge branch 'dl/test-must-fail-fixes-5'
The effort to avoid using test_must_fail on non-git command continues.
* dl/test-must-fail-fixes-5:
lib-submodule-update: pass 'test_must_fail' as an argument
lib-submodule-update: prepend "git" to $command
lib-submodule-update: consolidate --recurse-submodules
lib-submodule-update: add space after function name
Junio C Hamano [Tue, 7 Jul 2020 05:09:17 +0000 (22:09 -0700)]
Merge branch 'jk/fast-export-anonym-alt'
"git fast-export --anonymize" learned to take customized mapping to
allow its users to tweak its output more usable for debugging.
* jk/fast-export-anonym-alt:
fast-export: use local array to store anonymized oid
fast-export: anonymize "master" refname
fast-export: allow seeding the anonymized mapping
fast-export: add a "data" callback parameter to anonymize_str()
fast-export: move global "idents" anonymize hashmap into function
fast-export: use a flex array to store anonymized entries
fast-export: stop storing lengths in anonymized hashmaps
fast-export: tighten anonymize_mem() interface to handle only strings
fast-export: store anonymized oids as hex strings
fast-export: use xmemdupz() for anonymizing oids
t9351: derive anonymized tree checks from original repo
"git difftool" has trouble dealing with paths added to the index
with the intent-to-add bit.
* js/diff-files-i-t-a-fix-for-difftool:
difftool -d: ensure that intent-to-add files are handled correctly
diff-files --raw: show correct post-image of intent-to-add files
Junio C Hamano [Tue, 7 Jul 2020 05:09:17 +0000 (22:09 -0700)]
Merge branch 'js/default-branch-name'
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
Junio C Hamano [Tue, 7 Jul 2020 05:09:17 +0000 (22:09 -0700)]
Merge branch 'bc/http-push-flagsfix'
The code to push changes over "dumb" HTTP had a bad interaction
with the commit reachability code due to incorrect allocation of
object flag bits, which has been corrected.
* bc/http-push-flagsfix:
http-push: ensure unforced pushes fail when data would be lost
Junio C Hamano [Tue, 7 Jul 2020 05:09:16 +0000 (22:09 -0700)]
Merge branch 'js/pu-to-seen'
The documentation and some tests have been adjusted for the recent
renaming of "pu" branch to "seen".
* js/pu-to-seen:
tests: reference `seen` wherever `pu` was referenced
docs: adjust the technical overview for the rename `pu` -> `seen`
docs: adjust for the recent rename of `pu` to `seen`
Junio C Hamano [Tue, 7 Jul 2020 05:09:14 +0000 (22:09 -0700)]
Merge branch 'bc/sha-256-cvs-svn-updates'
CVS/SVN interface have been prepared for SHA-256 transition
* bc/sha-256-cvs-svn-updates:
git-cvsexportcommit: port to SHA-256
git-cvsimport: port to SHA-256
git-cvsserver: port to SHA-256
git-svn: set the OID length based on hash algorithm
perl: make SVN code hash independent
perl: make Git::IndexInfo work with SHA-256
perl: create and switch variables for hash constants
t/lib-git-svn: make hash size independent
t9101: make hash independent
t9104: make hash size independent
t9100: make test work with SHA-256
t9108: make test hash independent
t9168: make test hash independent
t9109: make test hash independent
Junio C Hamano [Tue, 7 Jul 2020 05:09:13 +0000 (22:09 -0700)]
Merge branch 'ak/commit-graph-to-slab'
A few fields in "struct commit" that do not have to always be
present have been moved to commit slabs.
* ak/commit-graph-to-slab:
commit-graph: minimize commit_graph_data_slab access
commit: move members graph_pos, generation to a slab
commit-graph: introduce commit_graph_data_slab
object: drop parsed_object_pool->commit_count
Junio C Hamano [Tue, 7 Jul 2020 05:09:13 +0000 (22:09 -0700)]
Merge branch 'en/sparse-status'
"git status" learned to report the status of sparse checkout.
* en/sparse-status:
git-prompt: include sparsity state as well
git-prompt: document how in-progress operations affect the prompt
wt-status: show sparse checkout status as well
Junio C Hamano [Tue, 7 Jul 2020 05:09:13 +0000 (22:09 -0700)]
Merge branch 'bc/sha-256-part-2'
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
René Scharfe [Sat, 4 Jul 2020 12:56:32 +0000 (14:56 +0200)]
revision: disable min_age optimization with line-log
If one of the options --before, --min-age or --until is given,
limit_list() filters out younger commits early on. Line-log needs all
those commits to trace the movement of line ranges, though. Skip this
optimization if both are used together.
Reported-by: Мария Долгополова <dolgopolovamariia@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool -d: ensure that intent-to-add files are handled correctly
In https://github.com/git-for-windows/git/issues/2677, a `git difftool
-d` problem was reported. The underlying cause was a bug in `git
diff-files --raw` that we just fixed: it reported intent-to-add files
with the empty _tree_ as the post-image OID, when we need to show
an all-zero (or, "null") OID instead, to indicate to the caller that
they have to look at the worktree file.
The symptom of that problem shown by `git difftool` was this:
error: unable to read sha1 file of <path> (<empty-tree-OID>)
error: could not write '<filename>'
Make sure that the reported `difftool` problem stays fixed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-files --raw: show correct post-image of intent-to-add files
The documented behavior of `git diff-files --raw` is to display
[...] 0{40} if creation, unmerged or "look at work tree".
on the right hand (i.e. postimage) side. This happens for files that
have unstaged modifications, and for files that are unmodified but
stat-dirty.
For intent-to-add files, we used to show the empty blob's hash instead.
In c26022ea8f5 (diff: convert diff_addremove to struct object_id,
2017-05-30), we made that worse by inadvertently changing that to the
hash of the empty tree.
Let's make the behavior consistent with files that have unstaged
modifications (which applies to intent-to-add files, too) by showing
all-zero values also for intent-to-add files.
Accordingly, this patch adjusts the expectations set by the regression
test introduced in feea6946a5b (diff-files: treat "i-t-a" files as
"not-in-index", 2020-06-20).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email --in-reply-to= fails to override In-Reply-To email headers,
if they're present in the output of format-patch, even when explicitly
told to do so by the option --no-thread, which breaks the contract of the
command line switch option, per its man page.
"
--in-reply-to=<identifier>
Make the first mail (or all the mails with --no-thread) appear as
a reply to the given Message-Id, which avoids breaking threads to
provide a new patch series.
"
This patch fixes the aformentioned issue, by bringing --in-reply-to's old
overriding behavior back.
The test was donated by Carlo Marcelo Arenas Belón.
Signed-off-by: Rafael Aquini <aquini@redhat.com> Helped-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cat-file: add missing [=<format>] to usage/synopsis
When displaying cat-file usage, the fact that a <format> can
be specified is only visible when lookling at the --batch and
--batch-check options which are shown like this:
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
It seems more coherent and improves discovery to also show it
on the usage line.
In the documentation the DESCRIPTION tells us that "The output
format can be overridden using the optional <format> argument",
but we can't see the <format> argument in the SYNOPSIS above
the description which is confusing.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ville Skyttä [Mon, 29 Jun 2020 18:59:45 +0000 (21:59 +0300)]
completion: nounset mode fixes
Accessing unset variables results an errors when the shell is in
nounset/-u mode. This fixes the cases I've come across while using git
completion in a shell running in that mode for a while. It's hard to
tell if this is the complete set, but at least it improves things.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jul 2020 13:27:30 +0000 (13:27 +0000)]
commit-graph: check all leading directories in changed path Bloom filters
The file 'dir/subdir/file' can only be modified if its leading
directories 'dir' and 'dir/subdir' are modified as well.
So when checking modified path Bloom filters looking for commits
modifying a path with multiple path components, then check not only
the full path in the Bloom filters, but all its leading directories as
well. Take care to check these paths in "deepest first" order,
because it's the full path that is least likely to be modified, and
the Bloom filter queries can short circuit sooner.
This can significantly reduce the average false positive rate, by
about an order of magnitude or three(!), and can further speed up
pathspec-limited revision walks. The table below compares the average
false positive rate and runtime of
git rev-list HEAD -- "$path"
before and after this change for 5000+ randomly* selected paths from
each repository:
Average false Average Average
positive rate runtime runtime
before after before after difference
------------------------------------------------------------------
git 3.220% 0.7853% 0.0558s 0.0387s -30.6%
linux 2.453% 0.0296% 0.1046s 0.0766s -26.8%
tensorflow 2.536% 0.6977% 0.0594s 0.0420s -29.2%
*Path selection was done with the following pipeline:
git ls-tree -r --name-only HEAD | sort -R | head -n 5000
The improvements in runtime are much smaller than the improvements in
average false positive rate, as we are clearly reaching diminishing
returns here. However, all these timings depend on that accessing
tree objects is reasonably fast (warm caches). If we had a partial
clone and the tree objects had to be fetched from a promisor remote,
e.g.:
then checking all leading path component can reduce the runtime from
over an hour to a few seconds (and this is with the clone and the
promisor on the same machine).
This adjusts the tracing values in t4216-log-bloom.sh, which provides a
concrete way to notice the improvement.
Helped-by: Taylor Blau <me@ttaylorr.com> Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 1 Jul 2020 13:27:29 +0000 (13:27 +0000)]
revision: empty pathspecs should not use Bloom filters
The prepare_to_use_bloom_filter() method was not intended to be called
on an empty pathspec. However, 'git log -- .' and 'git log' are subtly
different: the latter reports all commits while the former will simplify
commits that do not change the root tree.
This means that the path used to construct the bloom_key might be empty,
and that value is not added to the Bloom filter during construction.
That means that the results are likely incorrect!
To resolve the issue, be careful about the length of the path and stop
filling Bloom filters. To be completely sure we do not use them, drop
the pointer to the bloom_filter_settings from the commit-graph. That
allows our test to look at the trace2 logs to verify no Bloom filter
statistics are reported.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jul 2020 13:27:27 +0000 (13:27 +0000)]
commit-graph: check chunk sizes after writing
In my experience while experimenting with new commit-graph chunks,
early versions of the corresponding new write_commit_graph_my_chunk()
functions are, sadly but not surprisingly, often buggy, and write more
or less data than they are supposed to, especially if the chunk size
is not directly proportional to the number of commits. This then
causes all kinds of issues when reading such a bogus commit-graph
file, raising the question of whether the writing or the reading part
happens to be buggy this time.
Let's catch such issues early, already when writing the commit-graph
file, and check that each write_graph_chunk_*() function wrote the
amount of data that it was expected to, and what has been encoded in
the Chunk Lookup table. Now that all commit-graph chunks are written
in a loop we can do this check in a single place for all chunks, and
any chunks added in the future will get checked as well.
Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jul 2020 13:27:26 +0000 (13:27 +0000)]
commit-graph: simplify chunk writes into loop
In write_commit_graph_file() we now have one block of code filling the
array of 'struct chunk_info' with the IDs and sizes of chunks to be
written, and an other block of code calling the functions responsible
for writing individual chunks. In case of optional chunks like Extra
Edge List an Base Graphs List there is also a condition checking
whether that chunk is necessary/desired, and that same condition is
repeated in both blocks of code. Other, newer chunks have similar
optional conditions.
Eliminate these repeated conditions by storing the function pointers
responsible for writing individual chunks in the 'struct chunk_info'
array as well, and calling them in a loop to write the commit-graph
file. This will open up the possibility for a bit of foolproofing in
the following patch.
Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Wed, 1 Jul 2020 13:27:25 +0000 (13:27 +0000)]
commit-graph: unify the signatures of all write_graph_chunk_*() functions
Update the write_graph_chunk_*() helper functions to have the same
signature:
- Return an int error code from all these functions.
write_graph_chunk_base() already has an int error code, now the
others will have one, too, but since they don't indicate any
error, they will always return 0.
- Drop the hash size parameter of write_graph_chunk_oids() and
write_graph_chunk_data(); its value can be read directly from
'the_hash_algo' inside these functions as well.
This opens up the possibility for further cleanups and foolproofing in
the following two patches.
Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changed-path Bloom filters were released in v2.27.0, but have a
significant drawback. A user can opt-in to writing the changed-path
filters using the "--changed-paths" option to "git commit-graph write"
but the next write will drop the filters unless that option is
specified.
This becomes even more important when considering the interaction with
gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of
features.experimental). These config options trigger commit-graph writes
that the user did not signal, and hence there is no --changed-paths
option available.
Allow a user that opts-in to the changed-path filters to persist the
property of "my commit-graph has changed-path filters" automatically. A
user can drop filters using the --no-changed-paths option.
In the process, we need to be extremely careful to match the Bloom
filter settings as specified by the commit-graph. This will allow future
versions of Git to customize these settings, and the version with this
change will persist those settings as commit-graphs are rewritten on
top.
Use the trace2 API to signal the settings used during the write, and
check that output in a test after manually adjusting the correct bytes
in the commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_bloom_filter() method is a bit complicated in some parts where
it does not need to be. In particular, it needs to return a NULL filter
only when compute_if_not_present is zero AND the filter data cannot be
loaded from a commit-graph file. This currently happens by accident
because the commit-graph does not load changed-path Bloom filters from
an existing commit-graph when writing a new one. This will change in a
later patch.
Also clean up some style issues while we are here.
One side-effect of returning a NULL filter is that the filters that are
reported as "too large" will now be reported as NULL insead of length
zero. This case was not properly covered before, so add a test. Further,
remote the counting of the zero-length filters from revision.c and the
trace2 logs.
Helped-by: René Scharfe <l.s.r@web.de> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 29 Jun 2020 21:17:24 +0000 (14:17 -0700)]
Merge branch 'xl/upgrade-repo-format'
Allow runtime upgrade of the repository format version, which needs
to be done carefully.
There is a rather unpleasant backward compatibility worry with the
last step of this series, but it is the right thing to do in the
longer term.
* xl/upgrade-repo-format:
check_repository_format_gently(): refuse extensions for old repositories
sparse-checkout: upgrade repository to version 1 when enabling extension
fetch: allow adding a filter after initial clone
repository: add a helper function to perform repository format upgrade
Sibi Siddharthan [Fri, 26 Jun 2020 16:11:38 +0000 (16:11 +0000)]
ci: modification of main.yml to use cmake for vs-build job
Teach .github/workflows/main.yml to use CMake for VS builds.
Modified the vs-test step to match windows-test step. This speeds
up the vs-test. Calling git-cmd from powershell and then calling git-bash
to perform the tests slows things down(factor of about 6). So git-bash
is directly called from powershell to perform the tests using prove.
NOTE: Since GitHub keeps the same directory for each job
(with respect to path) absolute paths are used in the bin-wrapper
scripts.
GitHub has switched to CMake 3.17.1 which changed the behaviour of
FindCURL module. An extra definition (-DCURL_NO_CURL_CMAKE=ON) has been
added to revert to the old behaviour.
In the configuration phase CMake looks for the required libraries for
building git (eg zlib,libiconv). So we extract the libraries before we
configure.
To check for ICONV_OMITS_BOM libiconv.dll needs to be in the working
directory of script or path. So we copy the dlls before we configure.
Signed-off-by: Sibi Siddharthan <sibisiddharthan.github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sibi Siddharthan [Fri, 26 Jun 2020 16:11:37 +0000 (16:11 +0000)]
cmake: support for building git on windows with msvc and clang.
This patch adds support for Visual Studio and Clang builds
The minimum required version of CMake is upgraded to 3.15 because
this version offers proper support for Clang builds on Windows.
Libintl is not searched for when building with Visual Studio or Clang
because there is no binary compatible version available yet.
NOTE: In the link options invalidcontinue.obj has to be included.
The reason for this is because by default, Windows calls abort()'s
instead of setting errno=EINVAL when invalid arguments are passed to
standard functions.
This commit explains it in detail: 4b623d80f73528a632576990ca51e34c333d5dd6
On Windows the default generator is Visual Studio,so for Visual Studio
builds do this:
cmake `relative-path-to-srcdir`
NOTE: Visual Studio generator is a multi config generator, which means
that Debug and Release builds can be done on the same build directory.
For Clang builds do this:
On bash
CC=clang cmake `relative-path-to-srcdir` -G Ninja
-DCMAKE_BUILD_TYPE=[Debug or Release]
On cmd
set CC=Clang
cmake `relative-path-to-srcdir` -G Ninja
-DCMAKE_BUILD_TYPE=[Debug or Release]
Signed-off-by: Sibi Siddharthan <sibisiddharthan.github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sibi Siddharthan [Fri, 26 Jun 2020 16:11:36 +0000 (16:11 +0000)]
cmake: support for building git on windows with mingw
This patch facilitates building git on Windows with CMake using MinGW
NOTE: The funtions unsetenv and hstrerror are not checked in Windows
builds.
Reasons
NO_UNSETENV is not compatible with Windows builds.
lines 262-264 compat/mingw.h
compat/mingw.h(line 25) provides a definition of hstrerror which
conflicts with the definition provided in
git-compat-util.h(lines 733-736).
To use CMake on Windows with MinGW do this:
cmake `relative-path-to-srcdir` -G "MinGW Makefiles"
Signed-off-by: Sibi Siddharthan <sibisiddharthan.github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sibi Siddharthan [Fri, 26 Jun 2020 16:11:35 +0000 (16:11 +0000)]
cmake: support for testing git when building out of the source tree
This patch allows git to be tested when performin out of source builds.
This involves changing GIT_BUILD_DIR in t/test-lib.sh to point to the
build directory. Also some miscellaneous copies from the source directory
to the build directory.
The copies are:
t/chainlint.sed needed by a bunch of test scripts
po/is.po needed by t0204-gettext-rencode-sanity
mergetools/tkdiff needed by t7800-difftool
contrib/completion/git-prompt.sh needed by t9903-bash-prompt
contrib/completion/git-completion.bash needed by t9902-completion
contrib/svn-fe/svnrdump_sim.py needed by t9020-remote-svn
NOTE: t/test-lib.sh is only modified when tests are run not during
the build or configure.
The trash directory is still srcdir/t
Signed-off-by: Sibi Siddharthan <sibisiddharthan.github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sibi Siddharthan [Fri, 26 Jun 2020 16:11:34 +0000 (16:11 +0000)]
cmake: support for testing git with ctest
This patch provides an alternate way to test git using ctest.
CTest ships with CMake, so there is no additional dependency being
introduced.
To perform the tests with ctest do this after building:
ctest -j[number of jobs]
NOTE: -j is optional, the default number of jobs is 1
Each of the jobs does this:
cd t/ && sh t[something].sh
The reason for using CTest is that it logs the output of the tests
in a neat way, which can be helpful during diagnosis of failures.
After the tests have run ctest generates three log files located in
`build-directory`/Testing/Temporary/
These log files are:
CTestCostData.txt:
This file contains the time taken to complete each test.
LastTestsFailed.log:
This log file contains the names of the tests that have failed in the
run.
LastTest.log:
This log file contains the log of all the tests that have run.
A snippet of the file is given below.
10/901 Testing: D:/my/git-master/t/t0009-prio-queue.sh
10/901 Test: D:/my/git-master/t/t0009-prio-queue.sh
Command: "sh.exe" "D:/my/git-master/t/t0009-prio-queue.sh"
Directory: D:/my/git-master/t
"D:/my/git-master/t/t0009-prio-queue.sh"
Output:
----------------------------------------------------------
ok 1 - basic ordering
ok 2 - mixed put and get
ok 3 - notice empty queue
ok 4 - stack order
passed all 4 test(s)
1..4
<end of output>
Test time = 1.11 sec
NOTE: Testing only works when building in source for now.
Signed-off-by: Sibi Siddharthan <sibisiddharthan.github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sibi Siddharthan [Fri, 26 Jun 2020 16:11:33 +0000 (16:11 +0000)]
cmake: installation support for git
Install the built binaries and scripts using CMake
This is very similar to `make install`.
By default the destination directory(DESTDIR) is /usr/local/ on Linux
To set a custom installation path do this:
cmake `relative-path-to-srcdir`
-DCMAKE_INSTALL_PREFIX=`preferred-install-path`
Then run `make install`
Signed-off-by: Sibi Siddharthan <sibisiddharthan.github@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This seems to be a false positive, as there's no type-punning at all
here. oid.hash is an array of unsigned char; when we pass it to a
function it decays to a pointer to unsigned char. We do take a void
pointer in put_be32(), but it's immediately aliased with another pointer
to unsigned char (and clearly the compiler is looking inside the inlined
put_be32(), since the warning doesn't happen with -O0).
This happens on gcc 4.8 and 4.9, but not later versions (I tested gcc 6,
7, 8, and 9).
We can work around it by using a local array instead of an object_id
struct. This is a little more intimate with the details of object_id,
but for whatever reason doesn't seem to trigger the compiler warning.
We can revert this patch once we decide that those gcc versions are too
old to care about for a warning like this (gcc 4.8 is the default
compiler for Ubuntu Trusty, which is out-of-support but not fully
end-of-life'd until April 2022).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 25 Jun 2020 19:48:35 +0000 (15:48 -0400)]
fast-export: anonymize "master" refname
Running "fast-export --anonymize" will leave "refs/heads/master"
untouched in the output, for two reasons:
- it helped to have some known reference point between the original
and anonymized repository
- since it's historically the default branch name, it doesn't leak any
information
Now that we can ask fast-export to retain particular tokens, we have a
much better tool for the first one (because it works for any ref, not
just master).
For the second, the notion of "default branch name" is likely to become
configurable soon, at which point the name _does_ leak information.
Let's drop this special case in preparation.
Note that we have to adjust the test a bit, since it relied on using the
name "master" in the anonymized repos. We could just use
--anonymize-map=master to keep the same output, but then we wouldn't
know if it works because of our hard-coded master or because of the
explicit map.
So let's flip the test a bit, and confirm that we anonymize "master",
but keep "other" in the output.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 25 Jun 2020 19:48:32 +0000 (15:48 -0400)]
fast-export: allow seeding the anonymized mapping
After you anonymize a repository, it can be hard to find which commits
correspond between the original and the result, and thus hard to
reproduce commands that triggered bugs in the original.
Let's make it possible to seed the anonymization map. This lets users
either:
- mark names to be retained as-is, if they don't consider them secret
(in which case their original commands would just work)
- map names to new values, which lets them adapt the reproduction
recipe to the new names without revealing the originals
The implementation is fairly straight-forward. We already store each
anonymized token in a hashmap (so that the same token appearing twice is
converted to the same result). We can just introduce a new "seed"
hashmap which is consulted first.
This does make a few more promises to the user about how we'll anonymize
things (e.g., token-splitting pathnames). But it's unlikely that we'd
want to change those rules, even if the actual anonymization of a single
token changes. And it makes things much easier for the user, who can
unblind only a directory name without having to specify each path within
it.
One alternative to this approach would be to anonymize as we see fit,
and then dump the whole refname and pathname mappings to a file. This
does work, but it's a bit awkward to use (you have to manually dig the
items you care about out of the mapping).
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 25 Jun 2020 19:27:47 +0000 (12:27 -0700)]
Merge branch 'jt/cdn-offload'
The "fetch/clone" protocol has been updated to allow the server to
instruct the clients to grab pre-packaged packfile(s) in addition
to the packed object data coming over the wire.
* jt/cdn-offload:
upload-pack: fix a sparse '0 as NULL pointer' warning
upload-pack: send part of packfile response as uri
fetch-pack: support more than one pack lockfile
upload-pack: refactor reading of pack-objects out
Documentation: add Packfile URIs design doc
Documentation: order protocol v2 sections
http-fetch: support fetching packfiles by URL
http-fetch: refactor into function
http: refactor finish_http_pack_request()
http: use --stdin when indexing dumb HTTP pack
Junio C Hamano [Thu, 25 Jun 2020 19:27:46 +0000 (12:27 -0700)]
Merge branch 'cc/upload-pack-data-3'
Code clean-up in the codepath that serves "git fetch" continues.
* cc/upload-pack-data-3:
upload-pack: refactor common code into do_got_oid()
upload-pack: move oldest_have to upload_pack_data
upload-pack: pass upload_pack_data to got_oid()
upload-pack: pass upload_pack_data to ok_to_give_up()
upload-pack: pass upload_pack_data to send_acks()
upload-pack: pass upload_pack_data to process_haves()
upload-pack: change allow_unadvertised_object_request to an enum
upload-pack: move allow_unadvertised_object_request to upload_pack_data
upload-pack: move extra_edge_obj to upload_pack_data
upload-pack: move shallow_nr to upload_pack_data
upload-pack: pass upload_pack_data to send_unshallow()
upload-pack: pass upload_pack_data to deepen_by_rev_list()
upload-pack: pass upload_pack_data to deepen()
upload-pack: pass upload_pack_data to send_shallow_list()
"git diff" used to take arguments in random and nonsense range
notation, e.g. "git diff A..B C", "git diff A..B C...D", etc.,
which has been cleaned up.
* ct/diff-with-merge-base-clarification:
Documentation: usage for diff combined commits
git diff: improve range handling
t/t3430: avoid undefined git diff behavior
projects / rit / log