Junio C Hamano [Mon, 2 Nov 2020 21:17:42 +0000 (13:17 -0800)]
Merge branch 'en/test-selector'
Our test scripts can be told to run only individual pieces while
skipping others with the "--run=..." option; they were taught to
take a substring of test title, in addition to numbers, to name the
test pieces to run.
* en/test-selector:
test-lib: reduce verbosity of skipped tests
t6006, t6012: adjust tests to use 'setup' instead of synonyms
test-lib: allow selecting tests by substring/glob with --run
Junio C Hamano [Mon, 2 Nov 2020 21:17:39 +0000 (13:17 -0800)]
Merge branch 'bk/sob-dco'
Document that the meaning of a Signed-off-by trailer can vary from
project to project in the end-user documentation, and clarify what
it means to this project.
* bk/sob-dco:
Documentation: stylistically normalize references to Signed-off-by:
SubmittingPatches: clarify DCO is our --signoff rule
Documentation: clarify and expand description of --signoff
doc: preparatory clean-up of description on the sign-off option
Junio C Hamano [Mon, 2 Nov 2020 21:17:39 +0000 (13:17 -0800)]
Merge branch 'ds/commit-graph-merging-fix'
When "git commit-graph" detects the same commit recorded more than
once while it is merging the layers, it used to die. The code now
ignores all but one of them and continues.
* ds/commit-graph-merging-fix:
commit-graph: don't write commit-graph when disabled
commit-graph: ignore duplicates when merging layers
Junio C Hamano [Mon, 2 Nov 2020 21:17:38 +0000 (13:17 -0800)]
Merge branch 'es/test-cmp-typocatcher'
A test helper "test_cmp A B" was taught to diagnose missing files A
or B as a bug in test, but some tests legitimately wanted to notice
a failure to even create file B as an error, in addition to leaving
the expected result in it, and were misdiagnosed as a bug. This
has been corrected.
Junio C Hamano [Mon, 2 Nov 2020 21:17:37 +0000 (13:17 -0800)]
Merge branch 'js/avoid-split-sideband-message'
The side-band status report can be sent at the same time as the
primary payload multiplexed, but the demultiplexer on the receiving
end incorrectly split a single status report into two, which has
been corrected.
* js/avoid-split-sideband-message:
test-pkt-line: drop colon from sideband identity
sideband: report unhandled incomplete sideband messages as bugs
sideband: avoid reporting incomplete sideband messages
Elijah Newren [Mon, 2 Nov 2020 18:55:06 +0000 (18:55 +0000)]
strmap: new utility functions
Add strmap as a new struct and associated utility functions,
specifically for hashmaps that map strings to some value. The API is
taken directly from Peff's proposal at
https://lore.kernel.org/git/20180906191203.GA26184@sigill.intra.peff.net/
Note that similar string-list, I have a strdup_strings setting.
However, unlike string-list, strmap_init() does not take a parameter for
this setting and instead automatically sets it to 1; callers who want to
control this detail need to instead call strmap_init_with_options().
(Future patches will add additional parameters to
strmap_init_with_options()).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 2 Nov 2020 18:55:05 +0000 (18:55 +0000)]
hashmap: provide deallocation function names
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
Elijah Newren [Mon, 2 Nov 2020 18:55:04 +0000 (18:55 +0000)]
hashmap: introduce a new hashmap_partial_clear()
merge-ort is a heavy user of strmaps, which are built on hashmap.[ch].
clear_or_reinit_internal_opts() in merge-ort was taking about 12% of
overall runtime in my testcase involving rebasing 35 patches of
linux.git across a big rename. clear_or_reinit_internal_opts() was
calling hashmap_free() followed by hashmap_init(), meaning that not only
was it freeing all the memory associated with each of the strmaps just
to immediately allocate a new array again, it was allocating a new array
that was likely smaller than needed (thus resulting in later need to
rehash things). The ending size of the map table on the previous commit
was likely almost perfectly sized for the next commit we wanted to pick,
and not dropping and reallocating the table immediately is a win.
Add some new API to hashmap to clear a hashmap of entries without
freeing map->table (and instead only zeroing it out like alloc_table()
would do, along with zeroing the count of items in the table and the
shrink_at field).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 2 Nov 2020 18:55:03 +0000 (18:55 +0000)]
hashmap: allow re-use after hashmap_free()
Previously, once map->table had been freed, any calls to hashmap_put(),
hashmap_get(), or hashmap_remove() would cause a NULL pointer
dereference (since hashmap_free_() also zeros the memory; without that
zeroing, calling these functions would cause a use-after-free problem).
Modify these functions to check for a NULL table and automatically
allocate as needed.
Also add a HASHMAP_INIT(fn, data) macro for initializing hashmaps on the
stack without calling hashmap_init().
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sibo Dong [Sat, 31 Oct 2020 22:09:46 +0000 (22:09 +0000)]
git-prompt.sh: localize `option` in __git_ps1_show_upstream
The variable 'option' is used in __git_ps1_show_upstream()
without being localized.
This clobbers the variable the user may be using for other
purposes, which is bad. Luckily, $option is not used to carry
information around in the script as a global variable. The use
of it in this script has very limited scope (namely, only inside
this function), so just declare that it is "local".
Signed-off-by: Sibo Dong <sibo.dong@outlook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The penultimate commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_blame_bloom_data'. Since 'cmd_blame' is the only caller
of 'setup_blame_bloom_data', it is now unnecessary for
'setup_blame_bloom_data' to receive 'path' as a separate argument, as
'sb.path' is already initialized.
Remove this argument from setup_blame_bloom_data's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sun, 1 Nov 2020 17:28:46 +0000 (17:28 +0000)]
blame: simplify 'setup_scoreboard' interface
The previous commit moved the initialization of 'sb.path' in
'builtin/blame.c::cmd_blame' before the call to
'blame.c::setup_scoreboard'. Since 'cmd_blame' is the only caller of
'setup_scoreboard', it is now unnecessary for 'setup_scoreboard' to
receive 'path' as a separate argument, as 'sb.path' is already
initialized.
Remove this argument from setup_scoreboard's interface and use the
'path' field of the 'sb' 'struct blame_scoreboard' instead.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sun, 1 Nov 2020 17:28:45 +0000 (17:28 +0000)]
blame: enable funcname blaming with userdiff driver
In blame.c::cmd_blame, we send the 'path' field of the 'sb' 'struct
blame_scoreboard' as the 'path' argument to
'line-range.c::parse_range_arg', but 'sb.path' is not set yet; it's set
to the local variable 'path' a few lines later at line 1137.
This 'path' argument is only used in 'parse_range_arg' if we are blaming
a funcname, i.e. `git blame -L :<funcname> <path>`, and in that case it
is sent to 'parse_range_funcname', where it is used to determine if a
userdiff driver should be used for said <path> to match the given
funcname.
Since 'path' is yet unset, the userdiff driver is never used, so we fall
back to the default funcname regex, which is usually not appropriate for
paths that are set to use a specific userdiff driver, and thus either we
match some unrelated lines, or we die with
fatal: -L parameter '<funcname>' starting at line 1: no match
This has been the case ever since `git blame` learned to blame a
funcname in 13b8f68c1f (log -L: :pattern:file syntax to find by
funcname, 2013-03-28).
Enable funcname blaming for paths using specific userdiff drivers by
initializing 'sb.path' earlier in 'cmd_blame', when some of its other
fields are initialized, so that it is set when passed to
'parse_range_arg'.
Add a regression test in 'annotate-tests.sh', which is sourced in
t8001-annotate.sh and t8002-blame.sh, leveraging an existing file used
to test the userdiff patterns in t4018-diff-funcname.
Also, use 'sb.path' instead of 'path' when constructing the error
message at line 1114, for consistency.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sun, 1 Nov 2020 17:28:44 +0000 (17:28 +0000)]
line-log: mention both modes in 'blame' and 'log' short help
'git blame -h' and 'git log -h' both show '-L <n,m>' and describe this
option as "Process only line range n,m, counting from 1". No hint is
given that a function name regex can also be used.
Use <range> instead, and expand the description of the option to mention
both modes. Remove "counting from 1" as it's uneeded; it's uncommon to
refer to the first line of a file as "line 0".
Also, for 'git log', improve the wording to better reflect the long help.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sun, 1 Nov 2020 17:28:43 +0000 (17:28 +0000)]
doc: add more pointers to gitattributes(5) for userdiff
Several Git commands can make use of the builtin userdiff patterns, but
it's not obvious in the documentation. Add pointers to the 'Defining a
custom hunk header' part of gitattributes(5) in the description of the
following options:
- the '--function-context' option of `git diff` and friends
- the '--function-context' option of `git grep`
- the '-L :<funcname>' option of `git log`, `gitk` and `git blame`
In 'git-grep.txt', take the opportunity to use backticks in the
description of '--show-function', and improve the wording of the
desription of '--function-context'.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sun, 1 Nov 2020 17:28:42 +0000 (17:28 +0000)]
blame-options.txt: also mention 'funcname' in '-L' description
Make it clearer that a function can be blamed by feeding `git blame`
'-L :<funcname>' by mentioning it at the beginnning of the description
of the '-L' option.
Also, in 'line-range-options.txt', which is used for git-log(1) and
gitk(1), do not parenthesize the mention of the ':<funcname>' mode, to
place it on equal footing with the '<start>,<end>' mode.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sun, 1 Nov 2020 17:28:40 +0000 (17:28 +0000)]
doc: log, gitk: move '-L' description to 'line-range-options.txt'
The description of the '-L' option for `git log` and `gitk` is almost
the same, but is repeated in both 'git-log.txt' and 'gitk.txt' (the
difference being that 'git-log.txt' lists the option with a space
after '-L', while 'gitk.txt' lists it as stuck and notes that `gitk`
only understands the stuck form).
Reduce duplication by creating a new file, 'line-range-options.txt',
and include it in both files.
To simplify the presentation, only list the stuck form for both
commands, and remove the note about `gitk` only understanding the stuck
form.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 1 Nov 2020 08:52:12 +0000 (09:52 +0100)]
pack-write: use hashwrite_be32() instead of double-buffering array
hashwrite() already buffers writes, so pass the fanout table entries
individually via hashwrite_be32(), which also does the endianess
conversion for us. This avoids a memory copy, shortens the code and
reduces the number of magic numbers.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 24 Oct 2020 17:06:48 +0000 (19:06 +0200)]
stash: simplify reflog emptiness check
Calling rev-parse to check if the drop subcommand removed the last stash
and treating its failure as confirmation is fragile, as the command can
fail for other reasons, e.g. because the system is out of memory.
Directly check if the reflog is empty instead, which is more robust.
Reported-by: Marek Mrva <mrva@eof-studios.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5411: finish preparing for `main` being the default branch name
In addition to the trivial search-and-replace performed over the course
of the previous three commits, there is one test in t5411 that depends
on the length of the default branch name.
Adjust it and use `main` as the default branch name in this test.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we adjusted roughly half of the support files,
to stay under the 100kB limit (mails larger than that are rejected by
the Git mailing list).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not convert the files in `t/t5411/` in one go because the patch
would be too big (mails larger than 100kB are rejected by the Git
mailing list). Instead, we start with roughly half of the support files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a straight-forward search-and-replace in the test script;
However, this is not yet complete because it requires many more
replacements in `t/t5411/`, too many for a single patch (the Git mailing
list rejects mails larger than 100kB). For that reason, we disable this
test script temporarily via the `PREPARE_FOR_MAIN_BRANCH` prereq.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 31 Oct 2020 12:47:58 +0000 (13:47 +0100)]
bisect: clear flags in passed repository
69d2cfe6e8 (bisect.c: remove the_repository reference, 2018-11-10) kept
the implicit the_repository reference in clear_commit_marks_all, which
was made explicit by the previous commit (and which also renamed it to
repo_clear_commit_marks). Replace it as well.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 31 Oct 2020 12:46:08 +0000 (13:46 +0100)]
object: allow clear_commit_marks_all to handle any repo
Allow callers to specify the repository to use. Rename the function to
repo_clear_commit_marks to document its new scope. No functional change
intended.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Daniel Duvall [Sat, 31 Oct 2020 02:39:02 +0000 (19:39 -0700)]
upload-pack: allow stateless client EOF just prior to haves
During stateless packfile negotiation where a depth is given, stateless
RPC clients (e.g. git-remote-curl) will send multiple upload-pack
requests with the first containing only the
wants/shallows/deepens/filters and the subsequent containing haves/done.
When upload-pack handles such requests, entering get_common_commits
without checking whether the client has hung up can result in unexpected
EOF during the negotiation loop and a die() with message "fatal: the
remote end hung up unexpectedly".
Real world effects include:
- A client speaking to git-http-backend via a server that doesn't check
the exit codes of CGIs (e.g. mod_cgi) doesn't know and doesn't care
about the fatal. It continues to process the response body as normal.
- A client speaking to a server that does check the exit code and
returns an errant HTTP status as a result will fail with the message
"error: RPC failed; HTTP 500 curl 22 The requested URL returned error:
500."
- Admins running servers that surface the failure must workaround it by
patching code that handles execution of git-http-backend to ignore exit
codes or take other heuristic approaches.
- Admins may have to deal with "hung up unexpectedly" log spam related
to the failures even in cases where the exit code isn't surfaced as an
HTTP server-side error status.
To avoid these EOF related fatals, have upload-pack gently peek for an
EOF between the sending of shallow/unshallow lines (followed by flush)
and the reading of client haves. If the client has hung up at this
point, exit normally.
Signed-off-by: Daniel Duvall <dan@mutual.io> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 30 Oct 2020 20:04:24 +0000 (13:04 -0700)]
Merge branch 'cm/t7xxx-cleanup'
Micro clean-up.
* cm/t7xxx-cleanup:
t7102: prepare expected output inside test_expect_* block
t7201: put each command on a separate line
t7201: use 'git -C' to avoid subshell
t7102,t7201: remove whitespace after redirect operator
t7102,t7201: remove unnecessary blank spaces in test body
t7101,t7102,t7201: modernize test formatting
Junio C Hamano [Thu, 29 Oct 2020 21:18:47 +0000 (14:18 -0700)]
Merge branch 'jk/committer-date-is-author-date-fix' into maint
In 2.29, "--committer-date-is-author-date" option of "rebase" and
"am" subcommands lost the e-mail address by mistake, which has been
corrected.
* jk/committer-date-is-author-date-fix:
rebase: fix broken email with --committer-date-is-author-date
am: fix broken email with --committer-date-is-author-date
t3436: check --committer-date-is-author-date result more carefully
Elijah Newren [Thu, 29 Oct 2020 20:32:13 +0000 (20:32 +0000)]
fast-rebase: demonstrate merge-ort's API via new test-tool command
Add a new test-tool command named 'fast-rebase', which is a
super-slimmed down and nowhere near as capable version of 'git rebase'.
'test-tool fast-rebase' is not currently planned for usage in the
testsuite, but is here for two purposes:
1) Demonstrate the desired API of merge-ort. In particular,
fast-rebase takes advantage of the separation of the merging
operation from the updating of the index and working tree, to
allow it to pick N commits, but only update the index and working
tree once at the end. Look for the calls to
merge_incore_nonrecursive() and merge_switch_to_result().
2) Provide a convenient benchmark that isn't polluted by the heavy
disk writing and forking of unnecessary processes that comes from
sequencer.c and merge-recursive.c. fast-rebase is not meant to
replace sequencer.c, just give ideas on how sequencer.c can be
changed. Updating sequencer.c with these goals is probably a
large amount of work; writing a simple targeted command with
no documentation, less-than-useful help messages, numerous
limitations in terms of flags it can accept and situations it can
handle, and which is flagged off from users is a much easier
interim step.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 29 Oct 2020 12:48:29 +0000 (12:48 +0000)]
log, show: add tests for messages containing CRLF
A previous commit adjusted the code in ref-filter.c so that messages
containing CRLF are now correctly parsed and displayed.
Add tests to also check that `git log` and `git show` correctly handle
such messages, to prevent futur regressions if these commands are
refactored to use the ref-filter API.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 29 Oct 2020 12:48:28 +0000 (12:48 +0000)]
ref-filter: handle CRLF at end-of-line more gracefully
The ref-filter code does not correctly handle commit or tag messages
that use CRLF as the line terminator. Such messages can be created with
the `--cleanup=verbatim` option of `git commit` and `git tag`, or by
using `git commit-tree` directly.
The function `find_subpos` in ref-filter.c looks for two consecutive
LFs to find the end of the subject line, a sequence which is absent in
messages using CRLF. This results in the whole message being parsed as
the subject line (`%(contents:subject)`), and the body of the message
(`%(contents:body)`) being empty.
Moreover, in `copy_subject`, which wants to return the subject as a
single line, '\n' is replaced by space, but '\r' is
untouched.
This impacts the output of `git branch`, `git tag` and `git
for-each-ref`.
This behaviour is a regression for `git branch --verbose`, which
bisects down to 949af0684c (branch: use ref-filter printing APIs,
2017-01-10).
Adjust the ref-filter code to be more lenient by hardening the logic in
`copy_subject` and `find_subpos` to correctly parse messages containing
CRLF.
Add a new test script, 't3920-crlf-messages.sh', to test the behaviour
of commands using either the ref-filter or the pretty APIs with messages
using CRLF line endings. The function `test_crlf_subject_body_and_contents`
can be used to test that the `--format` option of `branch`, `tag`,
`for-each-ref`, `log` and `show` correctly displays the subject, body
and raw content of commit and tag messages using CRLF. Test the
output of `branch`, `tag` and `for-each-ref` with such commits.
Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Wed, 28 Oct 2020 09:33:24 +0000 (05:33 -0400)]
sideband: diagnose more sideband anomalies
In demultiplex_sideband(), there are two oddities when we check an
incoming packet:
- if it has zero length, then we assume it's a flush packet. This
means we fail to notice the difference between a real flush and a
true zero-length packet that's missing its sideband designator. It's
not a huge problem in practice because we'd never send a zero-length
data packet (even our keepalives are otherwise-empty sideband-1
packets).
But it would be nice to detect and report the error, since it's
likely to cause other confusion (we think the other side flushed,
but they do not).
- we try to detect packets missing their designator by checking for
"if (len < 1)". But this will never trigger for "len == 0"; we've
already detected that and left the function before then.
It _could_ detect a negative "len" parameter. But in that case, the
error message is wrong. The issue is not "no sideband" but rather
"eof while reading the packet". However, this can't actually be
triggered in practice, because neither of the two callers uses
pkt_read's GENTLE_ON_EOF flag. Which means they'd die with "the
remote end hung up unexpectedly" before we even get here.
So this truly is dead code.
We can improve these cases by passing in a pkt-line status to the
demultiplexer, and by having recv_sideband() use GENTLE_ON_EOF. This
gives us two improvements:
- we can now reliably detect flush packets, and will report a normal
packet missing its sideband designator as an error
- we'll report an eof with a more detailed "protocol error: eof while
reading sideband packet", rather than the generic "the remote end
hung up unexpectedly"
- when we see an eof, we'll flush the sideband scratch buffer, which
may provide some hints from the remote about why they hung up
(though note we already flush on newlines, so it's likely that most
such messages already made it through)
In some sense this patch goes against fbd76cd450 (sideband: reverse its
dependency on pkt-line, 2019-01-16), which caused the sideband code not
to depend on the pkt-line code. But that commit was really just trying
to deal with the circular header dependency. The two modules are
conceptually interlinked, and it was just trying to keep things
compiling. And indeed, there's a sticking point in this patch: because
pkt-line.h includes sideband.h, we can't add the reverse include we need
for the sideband code to have an "enum packet_read_status" parameter.
Nor can we forward declare it, because you can't forward declare an enum
in C. However, C does guarantee that enums fit in an int, so we can just
use that type.
One alternative would be for the callers to check themselves that they
got something sane from the pkt-line code. But besides duplicating
logic, this gets quite tricky. Any error condition requires flushing the
sideband #2 scratch buffer, which only demultiplex_sideband() knows how
to do.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Wed, 28 Oct 2020 02:06:55 +0000 (20:06 -0600)]
completion: fix conflict with bashcomp
We don't want to override the 'complete()' function in zsh, which can be
used by bashcomp.
Reported-by: Mark Lodato <lodato@google.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Wed, 28 Oct 2020 02:06:51 +0000 (20:06 -0600)]
completion: zsh: fix for command aliasing
A lot of people want to define aliases like gc='git commit', and zsh
allows that (when not using 'complete_aliases'), but we need to handle
services that call a function other than the main one.
With this patch we can do:
compdef _git gc=git_commit
Additionally, add compatibility for Zsh Git functions which have the
form git-commit (with dash, not underscore).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Wed, 28 Oct 2020 02:06:49 +0000 (20:06 -0600)]
completion: zsh: update slave script locations
Update the default locations of typical system bash-completion,
including the default bash-completion location for user scripts, and the
recommended way to find the system location (with pkg-config).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 27 Oct 2020 22:09:50 +0000 (15:09 -0700)]
Merge branch 'dl/checkout-p-merge-base'
"git checkout -p A...B [-- <path>]" did not work, even though the
same command without "-p" correctly used the merge-base between
commits A and B.
* dl/checkout-p-merge-base:
t2016: add a NEEDSWORK about the PERL prerequisite
add-patch: add NEEDSWORK about comparing commits
Doc: document "A...B" form for <tree-ish> in checkout and switch
builtin/checkout: fix `git checkout -p HEAD...` bug
Junio C Hamano [Tue, 27 Oct 2020 22:09:49 +0000 (15:09 -0700)]
Merge branch 'sb/clone-origin'
"git clone" learned clone.defaultremotename configuration variable
to customize what nickname to use to call the remote the repository
was cloned from.
* sb/clone-origin:
clone: allow configurable default for `-o`/`--origin`
clone: read new remote name from remote_name instead of option_origin
clone: validate --origin option before use
refs: consolidate remote name validation
remote: add tests for add and rename with invalid names
clone: use more conventional config/option layering
clone: add tests for --template and some disallowed option pairs
Junio C Hamano [Tue, 27 Oct 2020 22:09:49 +0000 (15:09 -0700)]
Merge branch 'sk/force-if-includes'
"git push --force-with-lease[=<ref>]" can easily be misused to lose
commits unless the user takes good care of their own "git fetch".
A new option "--force-if-includes" attempts to ensure that what is
being force-pushed was created after examining the commit at the
tip of the remote ref that is about to be force-replaced.
* sk/force-if-includes:
t, doc: update tests, reference for "--force-if-includes"
push: parse and set flag for "--force-if-includes"
push: add reflog check for "--force-if-includes"
Jeff King [Tue, 27 Oct 2020 07:37:14 +0000 (03:37 -0400)]
checkout-index: propagate errors to exit code
If we encounter an error while checking out an explicit path, we print a
message to stderr but do not actually exit with a non-zero code. While
this is a plumbing command and the behavior goes all the way back to 33db5f4d90 (Add a "checkout-cache" command which does what the name
suggests., 2005-04-09), this is almost certainly an oversight:
- we _do_ return an exit code from checkout_file(); the caller just
never reads it
- errors while checking out all paths (with "-a") do result in a
non-zero exit code.
- it would be quite unusual not to use the exit code for an error,
as otherwise the caller has no idea the command failed except by
scraping stderr
To keep our tests simple and portable, we can use the most obvious
error: asking to checkout a path which is not in the index at all.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 27 Oct 2020 07:36:02 +0000 (03:36 -0400)]
checkout-index: drop error message from empty --stage=all
If checkout-index is given --stage=all for a specific path, it will try
to write stages 1-3 (if present) for that path to temporary files.
However, if the file is present only at stage 0, it writes nothing but
gives a confusing message:
$ git checkout-index --stage=all -- Makefile
git checkout-index: Makefile does not exist at stage 4
This is nonsense. There is no stage 4 (it's just an internal enum value
we use for "all"), and the documentation clearly states:
Paths which only have a stage 0 entry will always be omitted from the
output.
Here it's talking about the list of tempfiles written to stdout, but it
seems clear that this case was not meant to be an error. We even have a
test which covers it, but it only checks that the command reports an
exit code of 0, not its stderr. And it reports 0 only because of another
bug which fails to propagate errors (which will be fixed in a subsequent
patch).
So let's make the test more thorough. We'll also cover the case that we
found _no_ entry, not even a stage zero, which should still be an error.
However, because of the other bug, we'll have to mark this as expecting
failure for the moment.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 27 Oct 2020 07:13:09 +0000 (03:13 -0400)]
test-pkt-line: drop colon from sideband identity
We pass "sideband: " as our identity for errors to recv_sideband(). But
it already adds the trailing colon and space. This doesn't invalidate
any tests, but it looks funny when you examine the test output.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote: add meaningful exit code on missing/existing
Change the exit code for the likes of "git remote add/rename" to exit
with 2 if the remote in question doesn't exist, and 3 if it
does. Before we'd just die() and exit with the general 128 exit code.
This changes the output message from e.g.:
fatal: remote origin already exists.
To:
error: remote origin already exists.
Which I believe is a feature, since we generally use "fatal" for the
generic errors, and "error" for the more specific ones with a custom
exit code, but this part of the change may break code that already
relies on stderr parsing (not that we ever supported that...).
The motivation for this is a discussion around some code in GitLab's
gitaly which wanted to check this, and had to parse stderr to do so:
https://gitlab.com/gitlab-org/gitaly/-/merge_requests/2695
It's worth noting as an aside that a method of checking this that
doesn't rely on that is to check with "git config" whether the value
in question does or doesn't exist. That introduces a TOCTOU race
condition, but on the other hand this code (e.g. "git remote add")
already has a TOCTOU race.
We go through the config.lock for the actual setting of the config,
but the pseudocode logic is:
So e.g. if a sleep() is added right after the remote_is_configured()
check in add() we'll clobber remote.NAME.url, and add another (usually
duplicate) remote.NAME.fetch entry (and other values, depending on
invocation).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 27 Oct 2020 02:08:08 +0000 (02:08 +0000)]
merge-ort-wrappers: new convience wrappers to mimic the old merge API
There are a few differences between the new API in merge-ort and the old
API in merge-recursive. While the new API is more flexible, it might
feel like more work at times than the old API. merge-ort-wrappers
creates two convenience wrappers taking the exact same arguments as the
old merge_trees() and merge_recursive() functions and implements them
via the new API. This makes converting existing callsites easier, and
serves to highlight some of the differences in the API.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 27 Oct 2020 02:08:07 +0000 (02:08 +0000)]
merge-ort: barebones API of new merge strategy with empty implementation
This is the beginning of a new merge strategy. While there are some API
differences, and the implementation has some differences in behavior, it
is essentially meant as an eventual drop-in replacement for
merge-recursive.c. However, it is being built to exist side-by-side
with merge-recursive so that we have plenty of time to find out how
those differences pan out in the real world while people can still fall
back to merge-recursive. (Also, I intend to avoid modifying
merge-recursive during this process, to keep it stable.)
The primary difference noticable here is that the updating of the
working tree and index is not done simultaneously with the merge
algorithm, but is a separate post-processing step. The new API is
designed so that one can do repeated merges (e.g. during a rebase or
cherry-pick) and only update the index and working tree one time at the
end instead of updating it with every intermediate result. Also, one
can perform a merge between two branches, neither of which match the
index or the working tree, without clobbering the index or working tree.
The next three commits will demonstrate various uses of this new API.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nipunn Koorapati [Mon, 26 Oct 2020 19:32:53 +0000 (19:32 +0000)]
t/perf/fsmonitor: add benchmark for dirty status
This benchmark covers the git status time for a heavily
dirty directory - benchmarking fsmonitor's refresh
When running to compare our perl vs rs-git-fsmonitor - we see that
the perl script incurs significant overhead - further motivation
to provide a faster implementation within git.
7519.7: status (dirty) (fsmonitor=query-watchman) 10.05(7.78+1.56)
7519.20: status (dirty) (fsmonitor=rs-git-fsmonitor) 6.72(4.37+1.64)
7519.33: status (dirty) (fsmonitor=disabled) 5.62(4.24+2.03)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / rit / log