Jonathan Tan [Fri, 5 Mar 2021 01:16:20 +0000 (17:16 -0800)]
fetch-pack: do not mix --pack_header and packfile uri
When fetching (as opposed to cloning) from a repository with packfile
URIs enabled, an error like this may occur:
fatal: pack has bad object at offset 12: unknown object type 5
fatal: finish_http_pack_request gave result -1
fatal: fetch-pack: expected keep then TAB at start of http-fetch output
This bug was introduced in b664e9ffa1 ("fetch-pack: with packfile URIs,
use index-pack arg", 2021-02-22), when the index-pack args used when
processing the inline packfile of a fetch response and when processing
packfile URIs were unified.
This bug happens because fetch, by default, partially reads (and
consumes) the header of the inline packfile to determine if it should
store the downloaded objects as a packfile or loose objects, and thus
passes --pack_header=<...> to index-pack to inform it that some bytes
are missing. However, when it subsequently fetches the additional
packfiles linked by URIs, it reuses the same index-pack arguments, thus
wrongly passing --index-pack-arg=--pack_header=<...> when no bytes are
missing.
This does not happen when cloning because "git clone" always passes
do_keep, which instructs the fetch mechanism to always retain the
packfile, eliminating the need to read the header.
There are a few ways to fix this, including filtering out pack_header
arguments when downloading the additional packfiles, but I decided to
stick to always using index-pack throughout when packfile URIs are
present - thus, Git no longer needs to read the bytes, and no longer
needs --pack_header here.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 3 Mar 2021 11:16:43 +0000 (03:16 -0800)]
stash show: learn stash.showIncludeUntracked
The previous commit teaches `git stash show --include-untracked`. It
may be desirable for a user to be able to always enable the
--include-untracked behavior. Teach the stash.showIncludeUntracked
config option which allows users to do this in a similar manner to
stash.showPatch.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 3 Mar 2021 11:16:42 +0000 (03:16 -0800)]
stash show: teach --include-untracked and --only-untracked
Stash entries can be made with untracked files via
`git stash push --include-untracked`. However, because the untracked
files are stored in the third parent of the stash entry and not the
stash entry itself, running `git stash show` does not include the
untracked files as part of the diff.
With --include-untracked, untracked paths, which are recorded in the
third-parent if it exists, are shown in addition to the paths that have
modifications between the stash base and the working tree in the stash.
It is possible to manually craft a malformed stash entry where duplicate
untracked files in the stash entry will mask tracked files. We detect
and error out in that case via a custom unpack_trees() callback:
stash_worktree_untracked_merge().
Also, teach stash the --only-untracked option which only shows the
untracked files of a stash entry. This is similar to `git show stash^3`
but it is nice to provide a convenient abstraction for it so that users
do not have to think about the underlying implementation.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 5 Mar 2021 15:22:02 +0000 (10:22 -0500)]
builtin/repack.c: reword comment around pack-objects flags
The comment in this block is meant to indicate that passing '--all',
'--reflog', and so on aren't necessary when repacking with the
'--geometric' option.
But, it has two problems: first, it is factually incorrect ('--all' is
*not* incompatible with '--stdin-packs' as the comment suggests);
second, it is quite focused on the geometric case for a block that is
guarding against it.
Reword this comment to address both issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Fri, 5 Mar 2021 15:21:56 +0000 (10:21 -0500)]
builtin/repack.c: be more conservative with unsigned overflows
There are a number of places in the geometric repack code where we
multiply the number of objects in a pack by another unsigned value. We
trust that the number of objects in a pack is always representable by a
uint32_t, but we don't necessarily trust that that number can be
multiplied without overflow.
Sprinkle some unsigned_add_overflows() and unsigned_mult_overflows() in
split_pack_geometry() to check that we never overflow any unsigned types
when adding or multiplying them.
Arguably these checks are a little too conservative, and certainly they
do not help the readability of this function. But they are serving a
useful purpose, so I think they are worthwhile overall.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Fri, 5 Mar 2021 15:21:50 +0000 (10:21 -0500)]
builtin/repack.c: assign pack split later
To determine the where to place the split when repacking with the
'--geometric' option, split_pack_geometry() assigns the "split" variable
and then decrements it in a loop.
It would be equivalent (and more readable) to assign the split to the
loop position after exiting the loop, so do that instead.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Fri, 5 Mar 2021 15:21:43 +0000 (10:21 -0500)]
t7703: test --geometric repack with loose objects
We don't currently have a test that demonstrates the non-idempotent
behavior of 'git repack --geometric' with loose objects, so add one here
to make sure we don't regress in this area.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Fri, 5 Mar 2021 15:21:37 +0000 (10:21 -0500)]
builtin/repack.c: do not repack single packs with --geometric
In 0fabafd0b9 (builtin/repack.c: add '--geometric' option, 2021-02-22),
the 'git repack --geometric' code aborts early when there is zero or one
pack.
When there are no packs, this code does the right thing by placing the
split at "0". But when there is exactly one pack, the split is placed at
"1", which means that "git repack --geometric" (with any factor)
repacks all of the objects in a single pack.
This is wasteful, and the remaining code in split_pack_geometry() does
the right thing (not repacking the objects in a single pack) even when
only one pack is present.
Loosen the guard to only stop when there aren't any packs, and let the
rest of the code do the right thing. Add a test to ensure that this is
the case.
Noticed-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 4 Mar 2021 22:51:32 +0000 (22:51 +0000)]
Documentation/RelNotes: improve release note for rename detection work
There were some early changes in the 2.31 cycle to optimize some setup
in diffcore-rename.c[1], some later changes to measure performance[2],
and finally some significant changes to improve rename detection
performance. The final one was merged with the note
Performance optimization work on the rename detection continues.
That works for the commit log, but feels misleading as a release note
since all the changes were within one cycle. Simplify this to just
Performance improvements for rename detection.
The former wording could be seen as hinting that more performance
improvements will come in 2.32, which is true, but we can just cover
those in the 2.32 release notes when the time comes.
Jiang Xin [Thu, 4 Mar 2021 14:40:13 +0000 (22:40 +0800)]
Merge branch 'master' of github.com:git/git
* 'master' of github.com:git/git: (63 commits)
Git 2.31-rc1
Hopefully the last batch before -rc1
Revert "commit-graph: when incompatible with graphs, indicate why"
read-cache: make the index write buffer size 128K
dir: fix malloc of root untracked_cache_dir
commit-graph.c: display correct number of chunks when writing
doc/reftable: document how to handle windows
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
...
This commit causes breakage on macOS (10.13). It causes errors on
startup and completely breaks the commit functionality. There are two
main problems. First, it uses `string cat` which is not supported on
older Tcl versions. Second, it does a half close of the bidirectional
pipe to git-stripspace which is also not supported on older Tcl
versions.
Reported-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Shubham Verma [Tue, 2 Mar 2021 18:50:56 +0000 (00:20 +0530)]
t9801: replace test -f with test_path_is_file
Although `test -f` has the same functionality as test_path_is_file(), in
the case where test_path_is_file() fails, we get much better debugging
information.
Replace `test -f` with test_path_is_file so that future developers
will have a better experience debugging these test cases.
Signed-off-by: Shubham Verma <shubhunic@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence, on a case-insensitive file system,
(strictly speeking with core.ignorecase=true)
leads to an assertion failure and leaves .git/index.lock behind.
This regression was introduced in Commit 9b906af657,
"git-mv: improve error message for conflicted file"
The bugfix is to change the "file exist case-insensitive in the index"
into the correct "file exist (case-sensitive) in the index".
This avoids the "assert" later in the code and keeps setting up the
"ce" pointer for ce_stage(ce) done in the next else if.
This fixes
https://github.com/git-for-windows/git/issues/2920
Reported-By: Dan Moseley <Dan.Moseley@microsoft.com> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 3 Mar 2021 09:21:56 +0000 (01:21 -0800)]
git-cat-file.txt: remove references to "sha1"
As part of the hash-transition, git can operate on more than just SHA-1
repositories. Replace "sha1"-specific documentation with hash-agnostic
terminology.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 1 Mar 2021 22:02:57 +0000 (14:02 -0800)]
Merge branch 'hv/trailer-formatting'
The logic to handle "trailer" related placeholders in the
"--format=" mechanisms in the "log" family and "for-each-ref"
family is getting unified.
* hv/trailer-formatting:
ref-filter: use pretty.c logic for trailers
pretty.c: capture invalid trailer argument
pretty.c: refactor trailer logic to `format_set_trailers_options()`
t6300: use function to test trailer options
Junio C Hamano [Mon, 1 Mar 2021 22:02:57 +0000 (14:02 -0800)]
Merge branch 'sv/t7001-modernize'
Test script modernization.
* sv/t7001-modernize:
t7001: use `test` rather than `[`
t7001: use here-docs instead of echo
t7001: put each command on a separate line
t7001: use '>' rather than 'touch'
t7001: avoid using `cd` outside of subshells
t7001: remove whitespace after redirect operators
t7001: modernize subshell formatting
t7001: remove unnecessary blank lines
t7001: indent with TABs instead of spaces
t7001: modernize test formatting
Junio C Hamano [Mon, 1 Mar 2021 22:02:57 +0000 (14:02 -0800)]
Merge branch 'jt/transfer-fsck-across-packs'
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
Junio C Hamano [Mon, 1 Mar 2021 22:02:57 +0000 (14:02 -0800)]
Merge branch 'ds/chunked-file-api'
The common code to deal with "chunked file format" that is shared
by the multi-pack-index and commit-graph files have been factored
out, to help codepaths for both filetypes to become more robust.
* ds/chunked-file-api:
commit-graph.c: display correct number of chunks when writing
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
midx: add num_large_offsets to write_midx_context
midx: add pack_perm to write_midx_context
midx: add entries to write_midx_context
midx: use context in write_midx_pack_names()
midx: rename pack_info to write_midx_context
commit-graph: use chunk-format write API
chunk-format: create chunk format write API
commit-graph: anonymize data in chunk_write_fn
Junio C Hamano [Mon, 1 Mar 2021 22:02:56 +0000 (14:02 -0800)]
Merge branch 'en/diffcore-rename'
Performance optimization work on the rename detection continues.
* en/diffcore-rename:
merge-ort: call diffcore_rename() directly
gitdiffcore doc: mention new preliminary step for rename detection
diffcore-rename: guide inexact rename detection based on basenames
diffcore-rename: complete find_basename_matches()
diffcore-rename: compute basenames of source and dest candidates
t4001: add a test comparing basename similarity and content similarity
diffcore-rename: filter rename_src list when possible
diffcore-rename: no point trying to find a match better than exact
Junio C Hamano [Mon, 1 Mar 2021 22:02:56 +0000 (14:02 -0800)]
Merge branch 'jh/fsmonitor-prework'
Preliminary changes to fsmonitor integration.
* jh/fsmonitor-prework:
fsmonitor: refactor initialization of fsmonitor_last_update token
fsmonitor: allow all entries for a folder to be invalidated
fsmonitor: log FSMN token when reading and writing the index
fsmonitor: log invocation of FSMonitor hook to trace2
read-cache: log the number of scanned files to trace2
read-cache: log the number of lstat calls to trace2
preload-index: log the number of lstat calls to trace2
p7519: add trace logging during perf test
p7519: move watchman cleanup earlier in the test
p7519: fix watchman watch-list test on Windows
p7519: do not rely on "xargs -d" in test
René Scharfe [Sun, 28 Feb 2021 11:22:34 +0000 (12:22 +0100)]
pretty: document multiple %(describe) being inconsistent
Each %(describe) placeholder is expanded using a separate git describe
call. Their outputs depend on the tags present at the time, so there's
no consistency guarantee. Document that fact.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 1 Mar 2021 17:19:37 +0000 (09:19 -0800)]
Revert "commit-graph: when incompatible with graphs, indicate why"
This reverts commit c85eec7fc37e1ca79072f263ae6ea1ee305ba38c, as
it is a bit overzealous, we are in prerelease freeze, and we want
to have enough time to get this right and cook in 'next'.
Jeff King [Mon, 1 Mar 2021 09:29:47 +0000 (04:29 -0500)]
config.mak.uname: enable OPEN_RETURNS_EINTR for macOS Big Sur
We've had mixed reports on whether the latest release of macOS needs
this Makefile knob set. In most reported cases, there's antivirus
software running (which one might imagine could cause an open() call to
be delayed). However, one of the (off-list) reports I've gotten
indicated that it happened on an otherwise clean install of Big Sur.
Since the symptom is so bad (checkout randomly fails to write several
fails when the progress meter kicks in), and since the workaround is so
lightweight (if we don't see EINTR, it's just an extra conditional
check), let's just turn it on by default.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
githooks.txt: clarify documentation on reference-transaction hook
The reference-transaction hook doesn't clearly document its scope and
what values it receives as input. Document it to make it less surprising
and clearly delimit its (current) scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
githooks.txt: replace mentions of SHA-1 specific properties
The githooks(5) documentation states in several places that the hook
will receive a SHA-1 or hashes of 40 characters length. Given that we're
transitioning to a world where both SHA-1 and SHA-256 are supported,
this is inaccurate.
Fix the issue by replacing mentions of SHA-1 with "object name" and not
explicitly mentioning the hash size.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:48 +0000 (00:30 +0000)]
diffcore-rename: compute dir_rename_guess from dir_rename_counts
dir_rename_counts has a mapping of a mapping, in particular, it has
old_dir => { new_dir => count }
We want a simple mapping of
old_dir => new_dir
based on which new_dir had the highest count for a given old_dir.
Compute this and store it in dir_rename_guess.
This is the final piece of the puzzle needed to make our guesses at
which directory files have been moved to when basenames aren't unique.
For the testcases mentioned in commit 557ac0350d ("merge-ort: begin
performance work; instrument with trace2_region_* calls", 2020-10-28),
this change improves the performance as follows:
Before After
no-renames: 12.775 s ± 0.062 s 12.596 s ± 0.061 s
mega-renames: 188.754 s ± 0.284 s 130.465 s ± 0.259 s
just-one-mega: 5.599 s ± 0.019 s 3.958 s ± 0.010 s
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:47 +0000 (00:30 +0000)]
diffcore-rename: limit dir_rename_counts computation to relevant dirs
We are using dir_rename_counts to count the number of other directories
that files within a directory moved to. We only need this information
for directories that disappeared, though, so we can return early from
update_dir_rename_counts() for other paths.
If dirs_removed is passed to diffcore_rename_extended(), then it
provides the relevant bits of information for us to limit this counting
to relevant dirs. If dirs_removed is not passed, we would need to
compute some replacement in order to do this limiting. Introduce a new
info->relevant_source_dirs variable for this purpose, even though at
this stage we will only set it to dirs_removed for simplicity.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:46 +0000 (00:30 +0000)]
diffcore-rename: compute dir_rename_counts in stages
Compute dir_rename_counts based just on exact renames to start, as that
can provide us useful information in find_basename_matches(). This is
done by moving the code from compute_dir_rename_counts() into
initialize_dir_rename_info(), resulting in it being computed earlier and
based just on exact renames. Since that's an incomplete result, we
augment the counts via calling update_dir_rename_counts() after each
basename-guide and inexact rename detection match is found.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:45 +0000 (00:30 +0000)]
diffcore-rename: extend cleanup_dir_rename_info()
When diffcore_rename_extended() is passed a NULL dir_rename_count, we
will still want to create a temporary one for use by
find_basename_matches(), but have it fully deallocated before
diffcore_rename_extended() returns. However, when
diffcore_rename_extended() is passed a dir_rename_count, we want to fill
that strmap with appropriate values and return it. However, for our
interim purposes we may also add entries corresponding to directories
that cannot have been renamed due to still existing on both sides.
Extend cleanup_dir_rename_info() to handle these two different cases,
cleaning up the relevant bits of information for each case.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:44 +0000 (00:30 +0000)]
diffcore-rename: move dir_rename_counts into dir_rename_info struct
This continues the migration of the directory rename detection code into
diffcore-rename, now taking the simple step of combining it with the
dir_rename_info struct. Future commits will then make dir_rename_counts
be computed in stages, and add computation of dir_rename_guess.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:43 +0000 (00:30 +0000)]
diffcore-rename: add function for clearing dir_rename_count
As we adjust the usage of dir_rename_count we want to have a function
for clearing, or partially clearing it out. Add a
partial_clear_dir_rename_count() function for this purpose.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:42 +0000 (00:30 +0000)]
Move computation of dir_rename_count from merge-ort to diffcore-rename
Move the computation of dir_rename_count from merge-ort.c to
diffcore-rename.c, making slight adjustments to the data structures
based on the move. While the diffstat looks large, viewing this commit
with --color-moved makes it clear that only about 20 lines changed.
With this patch, the computation of dir_rename_count is still only done
after inexact rename detection, but subsequent commits will add a
preliminary computation of dir_rename_count after exact rename
detection, followed by some updates after inexact rename detection.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:41 +0000 (00:30 +0000)]
diffcore-rename: add a mapping of destination names to their indices
Compute a mapping of full filename to the index within rename_dst where
that filename is found, and store it in idx_map. idx_possible_rename()
needs this to quickly finding an array entry in rename_dst given the
pathname.
While at it, add placeholder initializations for dir_rename_count and
dir_rename_guess; these will be more fully populated in subsequent
commits.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:40 +0000 (00:30 +0000)]
diffcore-rename: provide basic implementation of idx_possible_rename()
Add a new struct dir_rename_info with various values we need inside our
idx_possible_rename() function introduced in the previous commit. Add a
basic implementation for this function showing how we plan to use the
variables, but which will just return early with a value of -1 (not
found) when those variables are not set up.
Future commits will do the work necessary to set up those other
variables so that idx_possible_rename() does not always return -1.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 27 Feb 2021 00:30:39 +0000 (00:30 +0000)]
diffcore-rename: use directory rename guided basename comparisons
A previous commit noted that it is very common for people to move files
across directories while keeping their filename the same. The last few
commits took advantage of this and showed that we can accelerate rename
detection significantly using basenames; since files with the same
basename serve as likely rename candidates, we can check those first and
remove them from the rename candidate pool if they are sufficiently
similar.
Unfortunately, the previous optimization was limited by the fact that
the remaining basenames after exact rename detection are not always
unique. Many repositories have hundreds of build files with the same
name (e.g. Makefile, .gitignore, build.gradle, etc.), and may even have
hundreds of source files with the same name. (For example, the linux
kernel has 100 setup.c, 87 irq.c, and 112 core.c files. A repository at
$DAYJOB has a lot of ObjectFactory.java and Plugin.java files).
For these files with non-unique basenames, we are faced with the task of
attempting to determine or guess which directory they may have been
relocated to. Such a task is precisely the job of directory rename
detection. However, there are two catches: (1) the directory rename
detection code has traditionally been part of the merge machinery rather
than diffcore-rename.c, and (2) directory rename detection currently
runs after regular rename detection is complete. The 1st catch is just
an implementation issue that can be overcome by some code shuffling.
The 2nd requires us to add a further approximation: we only have access
to exact renames at this point, so we need to do directory rename
detection based on just exact renames. In some cases we won't have
exact renames, in which case this extra optimization won't apply. We
also choose to not apply the optimization unless we know that the
underlying directory was removed, which will require extra data to be
passed in to diffcore_rename_extended(). Also, even if we get a
prediction about which directory a file may have relocated to, we will
still need to check to see if there is a file in the predicted
directory, and then compare the two files to see if they meet the higher
min_basename_score threshold required for marking the two files as
renames.
This commit introduces an idx_possible_rename() function which will
do this directory rename detection for us and give us the index within
rename_dst of the resulting filename. For now, this function is
hardcoded to return -1 (not found) and just hooks up how its results
would be used once we have a more complete implementation in place.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Fri, 26 Feb 2021 16:31:02 +0000 (11:31 -0500)]
pack-revindex.c: don't close unopened file descriptors
When opening a reverse index, load_revindex_from_disk() jumps to the
'cleanup' label in case something goes wrong: the reverse index had the
wrong size, an unrecognized version, or similar.
It also jumps to this label when the reverse index couldn't be opened in
the first place, which will cause an error with the unguarded close()
call in the label.
Guard this call with "if (fd >= 0)" to make sure that we have a valid
file descriptor to close before attempting to close it.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 26 Feb 2021 07:13:15 +0000 (02:13 -0500)]
t/perf: avoid copying worktree files from test repo
When running the perf suite, we copy files from an existing $GIT_DIR to
a scratch repository to give us a realistic setup on which to operate.
Since the perf scripts themselves may modify the scratch repository, we
want to make sure we've scrubbed any references back to the original.
One existing example is that we avoid copying the file "commondir" at
the top-level of the repository. In a worktree git-dir (e.g.,
.git/worktrees/foo), that file contains the path to the parent
repository; copying it could mean ref updates in the scratch repository
affect the original.
But there are other files we should cover, too:
- "gitdir" in a worktree git-dir contains the path to the actual .git
file in the working tree. We _shouldn't_ end up looking at it at
all, since the lack of a "commondir" file means Git won't consider
this to be a worktree git-dir. But it's best to err on the safe
side.
- in a parent repository that contains worktrees, the
"$GIT_DIR/worktrees" directory will contain the git dirs for the
individual worktrees. Which will themselves contain commondir and
gitdir files that may reference the original repository. We should
likewise remove them.
Note that this does mean that the perf suite's scratch repositories
will never have any worktrees. That's OK; we don't have any perf tests
that are influenced by their presence. If we add any, they'd
probably want to create the worktrees themselves anyway.
This patch adds both paths to the set of omissions in
test_perf_copy_repo_contents(). Note that we won't get confused here by
matching arbitrary names like refs/heads/commondir. This list is always
matching top-level entries in $GIT_DIR (we rely on "cp -R" to do the
actual recursion).
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 26 Feb 2021 07:11:39 +0000 (02:11 -0500)]
t/perf: handle worktrees as test repos
The perf suite gets confused when test_perf_default_repo is pointed at a
worktree (which includes when it is run from within a worktree at all,
since the default is to use the current repository).
Here's an example:
$ git worktree add ~/foo
Preparing worktree (new branch 'foo')
HEAD is now at 328c109303 The eighth batch
$ cd ~/foo
$ make
[...build output...]
$ cd t/perf
$ ./p0000-perf-lib-sanity.sh -v -i
[...]
perf 1 - test_perf_default_repo works:
running:
foo=$(git rev-parse HEAD) &&
test_export foo
fatal: ambiguous argument 'HEAD': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
The problem is that we didn't copy all of the necessary files from the
source repository (in this case we got HEAD, but we have no refs!). We
discover the git-dir with "rev-parse --git-dir", but this points to the
worktree's partial repository in .../.git/worktrees/foo.
That partial repository has a "commondir" file which points to the main
repository, where the actual refs are stored, but we don't copy it. This
is the correct thing to do, though! If we did copy it, then our scratch
test repo would be pointing back to the original main repo, and any ref
updates we made in the tests would impact that original repo.
Instead, we need to either:
1. Make a scratch copy of the original main repo (in addition to the
worktree repo), and point the scratch worktree repo's commondir at
it. This preserves the original relationship, but it's doubtful any
script really cares (if they are testing worktree performance,
they'd probably make their own worktrees). And it's trickier to get
right.
2. Collapse the main and worktree repos into a single scratch repo.
This can be done by copying everything from both, preferring any
files from the worktree repo.
This patch does the second one. With this applied, the example above
results in p0000 running successfully.
Reported-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 26 Feb 2021 06:14:35 +0000 (01:14 -0500)]
Makefile: add OPEN_RETURNS_EINTR knob
On some platforms, open() reportedly returns EINTR when opening regular
files and we receive a signal (usually SIGALRM from our progress meter).
This shouldn't happen, as open() should be a restartable syscall, and we
specify SA_RESTART when setting up the alarm handler. So it may actually
be a kernel or libc bug for this to happen. But it has been reported on
at least one version of Linux (on a network filesystem):
as well as on macOS starting with Big Sur even on a regular filesystem.
We can work around it by retrying open() calls that get EINTR, just as
we do for read(), etc. Since we don't ever _want_ to interrupt an open()
call, we can get away with just redefining open, rather than insisting
all callsites use xopen().
We actually do have an xopen() wrapper already (and it even does this
retry, though there's no indication of it being an observed problem back
then; it seems simply to have been lifted from xread(), etc). But it is
used hardly anywhere, and isn't suitable for general use because it will
die() on error. In theory we could combine the two, but it's awkward to
do so because of the variable-args interface of open().
This patch adds a Makefile knob for enabling the workaround. It's not
enabled by default for any platforms in config.mak.uname yet, as we
don't have enough data to decide how common this is (I have not been
able to reproduce on either Linux or Big Sur myself). It may be worth
enabling preemptively anyway, since the cost is pretty low (if we don't
see an EINTR, it's just an extra conditional).
However, note that we must not enable this on Windows. It doesn't do
anything there, and the macro overrides the existing mingw_open()
redirection. I've added a preemptive #undef here in the mingw header
(which is processed first) to just quietly disable it (we could also
make it an #error, but there is little point in being so aggressive).
Reported-by: Aleksey Kliger <alklig@microsoft.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Fri, 26 Feb 2021 16:23:54 +0000 (13:23 -0300)]
convert: fail gracefully upon missing clean cmd on required filter
The gitattributes documentation mentions that either the clean cmd or
the smudge cmd can be left unspecified in a filter definition. However,
when the filter is marked as 'required', the absence of any one of these
two should be treated as an error. Git already fails under these
circumstances, but not always in a pleasant way: omitting a clean cmd in
a required filter triggers an assertion error which leaves the user with
a quite verbose message:
This assertion is not really necessary, as the apply_filter() call below
it already performs the same check. And when this condition is not met,
the function returns 0, making the caller die() with a much nicer
message. (Also note that die()-ing here is the right behavior as
`would_convert_to_git_filter_fd() == true` is a precondition to use
convert_to_git_filter_fd(), and the former is only true when the filter
is required.) So remove the assertion and add two regression tests to
make sure that git fails nicely when either the smudge or clean command
is missing on a required filter.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 26 Feb 2021 00:43:32 +0000 (16:43 -0800)]
Merge branch 'dl/doc-config-camelcase'
A handful of multi-word configuration variable names in
documentation that are spelled in all lowercase have been corrected
to use the more canonical camelCase.
* dl/doc-config-camelcase:
index-format doc: camelCase core.excludesFile
blame-options.txt: camelcase blame.blankBoundary
i18n.txt: camel case and monospace "i18n.commitEncoding"
Junio C Hamano [Fri, 26 Feb 2021 00:43:31 +0000 (16:43 -0800)]
Merge branch 'mt/add-chmod-fixes'
Various fixes on "git add --chmod".
* mt/add-chmod-fixes:
add: propagate --chmod errors to exit status
add: mark --chmod error string for translation
add --chmod: don't update index when --dry-run is used
Junio C Hamano [Fri, 26 Feb 2021 00:43:31 +0000 (16:43 -0800)]
Merge branch 'ds/merge-base-independent'
The code to implement "git merge-base --independent" was poorly
done and was kept from the very beginning of the feature.
* ds/merge-base-independent:
commit-reach: stale commits may prune generation further
commit-reach: use heuristic in remove_redundant()
commit-reach: move compare_commits_by_gen
commit-reach: use one walk in remove_redundant()
commit-reach: reduce requirements for remove_redundant()
Junio C Hamano [Fri, 26 Feb 2021 00:43:30 +0000 (16:43 -0800)]
Merge branch 'mt/checkout-index-corner-cases'
The error codepath around the "--temp/--prefix" feature of "git
checkout-index" has been improved.
* mt/checkout-index-corner-cases:
checkout-index: omit entries with no tempname from --temp output
write_entry(): fix misuses of `path` in error messages
Junio C Hamano [Fri, 26 Feb 2021 00:43:29 +0000 (16:43 -0800)]
Merge branch 'mz/doc-notes-are-not-anchors'
Objects that lost references can be pruned away, even when they
have notes attached to it (and these notes will become dangling,
which in turn can be pruned with "git notes prune"). This has been
clarified in the documentation.
* mz/doc-notes-are-not-anchors:
docs: clarify that refs/notes/ do not keep the attached objects alive
Junio C Hamano [Fri, 26 Feb 2021 00:43:29 +0000 (16:43 -0800)]
Merge branch 'ab/detox-gettext-tests'
Removal of GIT_TEST_GETTEXT_POISON continues.
* ab/detox-gettext-tests:
tests: remove most uses of test_i18ncmp
tests: remove last uses of C_LOCALE_OUTPUT
tests: remove most uses of C_LOCALE_OUTPUT
tests: remove last uses of GIT_TEST_GETTEXT_POISON=false
* jk/rev-list-disk-usage:
docs/rev-list: add some examples of --disk-usage
docs/rev-list: add an examples section
rev-list: add --disk-usage option for calculating disk usage
t: add --no-tag option to test_commit
Derrick Stolee [Thu, 25 Feb 2021 18:19:43 +0000 (18:19 +0000)]
commit-graph: use config to specify generation type
We have two established generation number versions:
1: topological levels
2: corrected commit dates
The corrected commit dates are enabled by default, but they also write
extra data in the GDAT and GDOV chunks. Services that host Git data
might want to have more control over when this feature rolls out than
just updating the Git binaries.
Add a new "commitGraph.generationVersion" config option that specifies
the intended generation number version. If this value is less than 2,
then the GDAT chunk is never written _or read_ from an existing file.
This can replace our use of the GIT_TEST_COMMIT_GRAPH_NO_GDAT
environment variable in the test suite. Remove it.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 25 Feb 2021 18:19:42 +0000 (18:19 +0000)]
commit-graph: create local repository pointer
The write_commit_graph() method uses 'the_repository' in a few places. A
new need for a repository pointer is coming in the following change, so
group these instances into a local variable 'r' that could eventually
become part of the method signature, if so desired.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote is renamed don't change the canonical "*.pushRemote"
form to "*.pushremote". Fixes and tests for a minor bug in 923d4a5ca4f (remote rename/remove: handle branch.<name>.pushRemote
config values, 2020-01-27). See the preceding commit for why this does
& doesn't matter.
While we're at it let's also test that we handle the "*.pushDefault"
key correctly. The code to handle that was added in b3fd6cbf294 (remote rename/remove: gently handle remote.pushDefault
config, 2020-02-01) and does the right thing, but nothing tested that
we wrote out the canonical camel-cased form.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / rit / log