"git fetch", when received a bad packfile, can fail with SIGPIPE.
This wasn't wrong per-se, but we now detect the situation and fail
in a more predictable way.
* jk/fetch-pack-avoid-sigpipe-to-index-pack:
fetch-pack: ignore SIGPIPE when writing to index-pack
Junio C Hamano [Fri, 10 Dec 2021 22:35:12 +0000 (14:35 -0800)]
Merge branch 'vd/sparse-reset'
Various operating modes of "git reset" have been made to work
better with the sparse index.
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
Junio C Hamano [Fri, 10 Dec 2021 22:35:10 +0000 (14:35 -0800)]
Merge branch 'po/size-t-for-vs'
On platforms where ulong is shorter than size_t, code paths that
shifted 1 or 1U to the left lacked the necessary cast to size_t,
which have been corrected.
* po/size-t-for-vs:
object-file.c: LLP64 compatibility, upcast unity for left shift
diffcore-delta.c: LLP64 compatibility, upcast unity for left shift
repack.c: LLP64 compatibility, upcast unity for left shift
The advice message given by "git pull" when the user hasn't made a
choice between merge and rebase still said that the merge is the
default, which no longer is the case. This has been corrected.
* ah/advice-pull-has-no-preference-between-rebase-and-merge:
pull: don't say that merge is "the default strategy"
Junio C Hamano [Fri, 10 Dec 2021 22:35:08 +0000 (14:35 -0800)]
Merge branch 'ab/generate-command-list'
Build optimization.
* ab/generate-command-list:
generate-cmdlist.sh: don't parse command-list.txt thrice
generate-cmdlist.sh: replace "grep' invocation with a shell version
generate-cmdlist.sh: do not shell out to "sed"
generate-cmdlist.sh: stop sorting category lines
generate-cmdlist.sh: replace for loop by printf's auto-repeat feature
generate-cmdlist.sh: run "grep | sort", not "sort | grep"
generate-cmdlist.sh: don't call get_categories() from category_list()
generate-cmdlist.sh: spawn fewer processes
generate-cmdlist.sh: trivial whitespace change
command-list.txt: sort with "LC_ALL=C sort"
Junio C Hamano [Fri, 10 Dec 2021 22:35:03 +0000 (14:35 -0800)]
Merge branch 'ja/doc-cleanup'
Doc update.
* ja/doc-cleanup:
init doc: --shared=0xxx does not give umask but perm bits
doc: git-init: clarify file modes in octal.
doc: git-http-push: describe the refs as pattern pairs
doc: uniformize <URL> placeholders' case
doc: use three dots for indicating repetition instead of star
doc: git-ls-files: express options as optional alternatives
doc: use only hyphens as word separators in placeholders
doc: express grammar placeholders between angle brackets
doc: split placeholders as individual tokens
doc: fix git credential synopsis
Code clean-up to eventually allow information on remotes defined
for an arbitrary repository to be read.
* gc/remote-with-fewer-static-global-variables:
remote: die if branch is not found in repository
remote: remove the_repository->remote_state from static methods
remote: use remote_state parameter internally
remote: move static variables into per-repository struct
t5516: add test case for pushing remote refspecs
Junio C Hamano [Fri, 10 Dec 2021 22:35:01 +0000 (14:35 -0800)]
Merge branch 'vd/sparse-sparsity-fix-on-read'
Ensure that the sparseness of the in-core index matches the
index.sparse configuration specified by the repository immediately
after the on-disk index file is read.
* vd/sparse-sparsity-fix-on-read:
sparse-index: update do_read_index to ensure correct sparsity
sparse-index: add ensure_correct_sparsity function
sparse-index: avoid unnecessary cache tree clearing
test-read-cache.c: prepare_repo_settings after config init
Junio C Hamano [Mon, 29 Nov 2021 23:41:51 +0000 (15:41 -0800)]
Merge branch 'mc/clean-smudge-with-llp64'
The clean/smudge conversion code path has been prepared to better
work on platforms where ulong is narrower than size_t.
* mc/clean-smudge-with-llp64:
clean/smudge: allow clean filters to process extremely large files
odb: guard against data loss checking out a huge file
git-compat-util: introduce more size_t helpers
odb: teach read_blob_entry to use size_t
t1051: introduce a smudge filter test for extremely large files
test-lib: add prerequisite for 64-bit platforms
test-tool genzeros: generate large amounts of data more efficiently
test-genzeros: allow more than 2G zeros in Windows
Junio C Hamano [Mon, 29 Nov 2021 23:41:48 +0000 (15:41 -0800)]
Merge branch 'jc/unsetenv-returns-an-int'
The compatibility implementation for unsetenv(3) were written to
mimic ancient, non-POSIX, variant seen in an old glibc; it has been
changed to return an integer to match the more modern era.
* jc/unsetenv-returns-an-int:
unsetenv(3) returns int, not void
Junio C Hamano [Mon, 29 Nov 2021 23:41:47 +0000 (15:41 -0800)]
Merge branch 'jc/fix-ref-sorting-parse'
Things like "git -c branch.sort=bogus branch new HEAD", i.e. the
operation modes of the "git branch" command that do not need the
sort key information, no longer errors out by seeing a bogus sort
key.
* jc/fix-ref-sorting-parse:
for-each-ref: delay parsing of --sort=<atom> options
Junio C Hamano [Mon, 29 Nov 2021 23:41:45 +0000 (15:41 -0800)]
Merge branch 'ab/refs-errno-cleanup'
The "remainder" of hn/refs-errno-cleanup topic.
* ab/refs-errno-cleanup: (21 commits)
refs API: post-migration API renaming [2/2]
refs API: post-migration API renaming [1/2]
refs API: don't expose "errno" in run_transaction_hook()
refs API: make expand_ref() & repo_dwim_log() not set errno
refs API: make resolve_ref_unsafe() not set errno
refs API: make refs_ref_exists() not set errno
refs API: make refs_resolve_refdup() not set errno
refs tests: ignore ignore errno in test-ref-store helper
refs API: ignore errno in worktree.c's find_shared_symref()
refs API: ignore errno in worktree.c's add_head_info()
refs API: make files_copy_or_rename_ref() et al not set errno
refs API: make loose_fill_ref_dir() not set errno
refs API: make resolve_gitlink_ref() not set errno
refs API: remove refs_read_ref_full() wrapper
refs/files: remove "name exist?" check in lock_ref_oid_basic()
reflog tests: add --updateref tests
refs API: make refs_rename_ref_available() static
refs API: make parse_loose_ref_contents() not set errno
refs API: make refs_read_raw_ref() not set errno
refs API: add a version of refs_resolve_ref_unsafe() with "errno"
...
Allow "git status --porcelain=v2" to show the number of stash
entries with --show-stash like the normal output does.
* ow/stash-count-in-status-porcelain-output:
status: print stash info with --porcelain=v2 --show-stash
status: count stash entries in separate function
Victoria Dye [Mon, 29 Nov 2021 15:52:43 +0000 (15:52 +0000)]
unpack-trees: improve performance of next_cache_entry
To find the first non-unpacked cache entry, `next_cache_entry` iterates
through index, starting at `cache_bottom`. The performance of this in full
indexes is helped by `cache_bottom` advancing with each invocation of
`mark_ce_used` (called by `unpack_index_entry`). However, the presence of
sparse directories can prevent the `cache_bottom` from advancing in a sparse
index case, effectively forcing `next_cache_entry` to search from the
beginning of the index each time it is called.
The `cache_bottom` must be preserved for the sparse index (see 17a1bb570b
(unpack-trees: preserve cache_bottom, 2021-07-14)). Therefore, to retain the
benefit `cache_bottom` provides in non-sparse index cases, a separate `hint`
position indicates the first position `next_cache_entry` should search,
updated each execution with a new position.
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:42 +0000 (15:52 +0000)]
reset: make --mixed sparse-aware
Remove the `ensure_full_index` guard on `read_from_tree` and update `git
reset --mixed` to ensure it can use sparse directory index entries wherever
possible. Sparse directory entries are reset using `diff_tree_oid`, which
requires `change` and `add_remove` functions to process the internal
contents of the sparse directory. The `recursive` diff option handles cases
in which `reset --mixed` must diff/merge files that are nested multiple
levels deep in a sparse directory.
The use of pathspecs with `git reset --mixed` introduces scenarios in which
internal contents of sparse directories may be matched by the pathspec. In
order to reset *all* files in the repo that may match the pathspec, the
following conditions on the pathspec require index expansion before
performing the reset:
* "magic" pathspecs
* wildcard pathspecs that do not match only in-cone files or entire sparse
directories
* literal pathspecs matching something outside the sparse checkout
definition
Helped-by: Elijah Newren <newren@gmail.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:41 +0000 (15:52 +0000)]
reset: make sparse-aware (except --mixed)
Remove `ensure_full_index` guard on `prime_cache_tree` and update
`prime_cache_tree_rec` to correctly reconstruct sparse directory entries in
the cache tree. While processing a tree's entries, `prime_cache_tree_rec`
must determine whether a directory entry is sparse or not by searching for
it in the index (*without* expanding the index). If a matching sparse
directory index entry is found, no subtrees are added to the cache tree
entry and the entry count is set to 1 (representing the sparse directory
itself). Otherwise, the tree is assumed to not be sparse and its subtrees
are recursively added to the cache tree.
Helped-by: Elijah Newren <newren@gmail.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:40 +0000 (15:52 +0000)]
reset: integrate with sparse index
Disable `command_requires_full_index` repo setting and add
`ensure_full_index` guards around code paths that cannot yet use sparse
directory index entries. `reset --soft` does not modify the index, so no
compatibility changes are needed for it to function without expanding the
index. For all other reset modes (`--mixed`, `--hard`, `--keep`, `--merge`),
the full index is expanded to prevent cache tree corruption and invalid
variable accesses.
Additionally, the `read_cache()` check verifying an uncorrupted index is
moved after argument parsing and preparing the repo settings. The index is
not used by the preceding argument handling, but `read_cache()` must be run
*after* enabling sparse index for the command (so that the index is not
expanded unnecessarily) and *before* using the index for reset (so that it
is verified as uncorrupted).
Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Mon, 29 Nov 2021 15:52:39 +0000 (15:52 +0000)]
reset: expand test coverage for sparse checkouts
Add new tests for `--merge` and `--keep` modes, as well as mixed reset with
pathspecs. New performance test cases exercise various execution paths for
`reset`.
Co-authored-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 23 Nov 2021 00:20:33 +0000 (00:20 +0000)]
sparse-index: update do_read_index to ensure correct sparsity
Unless `command_requires_full_index` forces index expansion, ensure in-core
index sparsity matches config settings on read by calling
`ensure_correct_sparsity`. This makes the behavior of the in-core index more
consistent between different methods of updating sparsity: manually changing
the `index.sparse` config setting vs. executing
`git sparse-checkout --[no-]sparse-index init`
Although index sparsity is normally updated with `git sparse-checkout init`,
ensuring correct sparsity after a manual `index.sparse` change has some
practical benefits:
1. It allows for command-by-command sparsity toggling with
`-c index.sparse=<true|false>`, e.g. when troubleshooting issues with the
sparse index.
2. It prevents users from experiencing abnormal slowness after setting
`index.sparse` to `true` due to use of a full index in all commands until
the on-disk index is updated.
Helped-by: Junio C Hamano <gitster@pobox.com> Co-authored-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Victoria Dye <vdye@github.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 23 Nov 2021 00:20:32 +0000 (00:20 +0000)]
sparse-index: add ensure_correct_sparsity function
The `ensure_correct_sparsity` function is intended to provide a means of
aligning the in-core index with the sparsity required by the repository
settings and other properties of the index. The function first checks
whether a sparse index is allowed (per repository & sparse checkout pattern
settings). If the sparse index may be used, the index is converted to
sparse; otherwise, it is explicitly expanded with `ensure_full_index`.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Victoria Dye <vdye@github.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 23 Nov 2021 00:20:31 +0000 (00:20 +0000)]
sparse-index: avoid unnecessary cache tree clearing
When converting a full index to sparse, clear and recreate the cache tree
only if the cache tree is not fully valid. The convert_to_sparse operation
should exit silently if a cache tree update cannot be successfully completed
(e.g., due to a conflicted entry state). However, because this failure
scenario only occurs when at least a portion of the cache tree is invalid,
we can save ourselves the cost of clearing and recreating the cache tree by
skipping the check when the cache tree is fully valid.
Helped-by: Derrick Stolee <dstolee@microsoft.com> Co-authored-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Victoria Dye <vdye@github.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victoria Dye [Tue, 23 Nov 2021 00:20:30 +0000 (00:20 +0000)]
test-read-cache.c: prepare_repo_settings after config init
Move `prepare_repo_settings` after the git directory has been set up in
`test-read-cache.c`. The git directory settings must be initialized to
properly assign repo settings using the worktree-level git config.
Signed-off-by: Victoria Dye <vdye@github.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 23 Nov 2021 22:48:00 +0000 (14:48 -0800)]
Merge branch 'hm/paint-hits-in-log-grep' into maint
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with versions of PCREv2 library older
than 10.34 in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 22 Nov 2021 05:57:03 +0000 (21:57 -0800)]
Merge branch 'hm/paint-hits-in-log-grep'
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with certain versions of PCREv2
library in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
ci(check-whitespace): update stale file top comments
Earlier a066a90d (ci(check-whitespace): restrict to the intended
commits, 2021-07-14) changed the check-whitespace task to stop using a
shallow clone, and cc003621 (ci(check-whitespace): stop requiring a
read/write token, 2021-07-14) changed the way how the errors the task
discovered is signaled back to the user.
They however forgot to update the comment that outlines what is done in
the task. Correct them.
Signed-off-by: Hans Krentel (hakre) <hanskrentel@yahoo.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 19 Nov 2021 20:58:55 +0000 (15:58 -0500)]
fetch-pack: ignore SIGPIPE when writing to index-pack
When fetching, we send the incoming pack to index-pack (or
unpack-objects) via the sideband demuxer. If index-pack hits an error
(e.g., because an object fails fsck), then it will die immediately. This
may cause us to get SIGPIPE on the fetch, as we're still trying to write
pack contents from the sideband demuxer (which is typically a thread,
and thus takes down the whole fetch process).
You can see this in action with:
./t5702-protocol-v2.sh --stress --run=59
which ends with (wrapped for readability):
test_must_fail: died by signal 13: git -c protocol.version=2 \
-c transfer.fsckobjects=1 -c fetch.uriprotocols=http,https \
clone http://127.0.0.1:5708/smart/http_parent http_child
not ok 59 - packfile-uri with transfer.fsckobjects fails on bad object
This is mostly cosmetic. The actual error of interest (in this case, the
object that failed the fsck check) comes from index-pack straight to
stderr, so the user still sees it. They _might_ even see fetch-pack
complaining about index-pack failing, because the main thread is racing
with the sideband-demuxer. But they'll definitely see the signal death
in the exit code, which is what the test is complaining about.
We can make this more predictable by just ignoring SIGPIPE. The sideband
demuxer uses write_or_die(), so it will notice and stop (gracefully,
because we hook die_routine() to exit just the thread). And during this
section we're not writing anywhere else where we'd be concerned about
SIGPIPE preventing us from wasting effort writing to nowhere.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 19 Nov 2021 21:28:30 +0000 (16:28 -0500)]
refs: work around gcc-11 warning with REF_HAVE_NEW
Using gcc-11 (or 12) to compile refs.o with -O3 results in:
In file included from hashmap.h:4,
from cache.h:6,
from refs.c:5:
In function ‘oidcpy’,
inlined from ‘ref_transaction_add_update’ at refs.c:1065:3,
inlined from ‘ref_transaction_update’ at refs.c:1094:2,
inlined from ‘ref_transaction_verify’ at refs.c:1132:9:
hash.h:262:9: warning: argument 2 null where non-null expected [-Wnonnull]
262 | memcpy(dst->hash, src->hash, GIT_MAX_RAWSZ);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from git-compat-util.h:177,
from cache.h:4,
from refs.c:5:
refs.c: In function ‘ref_transaction_verify’:
/usr/include/string.h:43:14: note: in a call to function ‘memcpy’ declared ‘nonnull’
43 | extern void *memcpy (void *__restrict __dest, const void *__restrict __src,
| ^~~~~~
That call to memcpy() is in a conditional block that requires
REF_HAVE_NEW to be set. But in ref_transaction_update(), we make sure it
isn't set coming in:
if (flags & ~REF_TRANSACTION_UPDATE_ALLOWED_FLAGS)
BUG("illegal flags 0x%x passed to ref_transaction_update()", flags);
So it should be impossible to reach that memcpy() with a NULL oid. But
for whatever reason, gcc doesn't accept that hitting the BUG() means we
won't go any further, even though it's marked with the noreturn
attribute. And the conditional is correct; ALLOWED_FLAGS doesn't contain
HAVE_NEW or HAVE_OLD, and you can even simplify it to check for those
flags explicitly and the compiler still complains.
We can work around this by just clearing the disallowed flags
explicitly. This should be a noop because of the BUG() check, but it
makes the compiler happy.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Henrie [Thu, 18 Nov 2021 15:43:17 +0000 (08:43 -0700)]
pull: don't say that merge is "the default strategy"
Git no longer has a default strategy for reconciling divergent branches,
because there's no way for Git to know which strategy is appropriate in
any particular situation.
The initially proposed version in [*], that eventually became 031e2f7a (pull: abort by default when fast-forwarding is not
possible, 2021-07-22), dropped this phrase from the message, but
it was left in the final version by accident.
Junio C Hamano [Fri, 19 Nov 2021 17:06:36 +0000 (09:06 -0800)]
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
This reverts commit ae39ba431ab861548eb60b4bd2e1d8b8813db76f, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Josh Steadmon [Thu, 18 Nov 2021 22:01:41 +0000 (14:01 -0800)]
trace2: disable tr2_dst before warning on write errors
If writing a trace2 message fails, we optionally warn the user of this
fact. However, in 0ee10fd (usage: add trace2 entry upon warning(),
2020-11-23), we added a trace entry to the warning() function. This
means that we can enter an infinite loop of failing trace2 writes and
warnings. Fix this by disabling the failing trace2 destination before
issuing the warning.
Additionally, trace2 sets a default SIGPIPE handler
(tr2main_signal_handler) when it is initialized. This handler generates
its own trace2 messages when a signal is received. If a trace2 write
fails due to a broken pipe, this handler will run and then cause another
failed write. Fix this by temporarily ignoring SIGPIPE while writing
trace2 messages. This is safe because the write will still fail, and we
will disable the failing destination.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Thu, 18 Nov 2021 00:53:25 +0000 (16:53 -0800)]
remote: die if branch is not found in repository
In a subsequent commit, we would like external-facing functions to be
able to accept "struct repository" and "struct branch" as a pair. This
is useful for functions like pushremote_for_branch(), which need to take
values from the remote_state and branch, even if branch == NULL.
However, a caller may supply an unrelated repository and branch, which
is not supported behavior.
To prevent misuse, add a die_on_missing_branch() helper function that
dies if a given branch is not from a given repository. Speed up the
existence check by replacing the branches list with a branches_hash
hashmap.
Like read_config(), die_on_missing_branch() is only called from
non-static functions; static functions are less prone to misuse because
they have strong conventions for keeping remote_state and branch in
sync.
Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Thu, 18 Nov 2021 00:53:24 +0000 (16:53 -0800)]
remote: remove the_repository->remote_state from static methods
Replace all remaining references of the_repository->remote_state in
static functions with a struct remote_state parameter.
To do so, move read_config() calls to non-static functions and create a
family of static functions, "remotes_*", that behave like "repo_*", but
accept struct remote_state instead of struct repository. In the case
where a static function calls a non-static function, replace the
non-static function with its "remotes_*" equivalent.
Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Thu, 18 Nov 2021 00:53:23 +0000 (16:53 -0800)]
remote: use remote_state parameter internally
Without changing external-facing functions, replace
the_repository->remote_state internally by adding a struct remote_state
parameter.
As a result, external-facing functions are still tied to the_repository,
but most static functions no longer reference
the_repository->remote_state. The exceptions are those that are used in
a way that depends on external-facing functions e.g. the callbacks to
remote_get_1().
Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Thu, 18 Nov 2021 00:53:22 +0000 (16:53 -0800)]
remote: move static variables into per-repository struct
remote.c does not works with non-the_repository because it stores its
state as static variables. To support non-the_repository, we can use a
per-repository struct for the remotes subsystem.
Prepare for this change by defining a struct remote_state that holds
the remotes subsystem state and move the static variables of remote.c
into the_repository->remote_state.
This introduces no behavioral or API changes.
Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Thu, 18 Nov 2021 00:53:21 +0000 (16:53 -0800)]
t5516: add test case for pushing remote refspecs
"git push remote-name" (that is, with no refspec given on the command
line) should push the refspecs in remote.remote-name.push. There is no
test case that checks this behavior in detached HEAD, so add one.
Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erwin Villejo [Wed, 17 Nov 2021 07:55:50 +0000 (07:55 +0000)]
pull: should be noop when already-up-to-date
The already-up-to-date pull bug was fixed for --ff-only but it did not
include the case where --ff or --ff-only are not specified. This updates
the --ff-only fix to include the case where --ff or --ff-only are not
specified in command line flags or config.
Signed-off-by: Erwin Villejo <erwin.villejo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 16 Nov 2021 21:38:50 +0000 (16:38 -0500)]
t5319: corrupt more bytes of the midx checksum
One of the tests in t5319 corrupts the checksum of the midx file by
writing a single 0xff over the final byte, and then confirms that we
detect the problem. This usually works fine, but would break if the
actual checksum ended with that same byte already.
It seems like this should happen in 1 out of 256 test runs, but it turns
out to be less often in practice. The contents of the midx are mostly
deterministic because it's based on the objects, and we remove most
sources of randomness by setting GIT_COMMITTER_DATE, etc. However,
there's still some randomness: some objects are duplicated between
packs, and the midx must decide which to use, which can be based on
timing.
So very occasionally we can end up with a real 0xff byte, and the test
fails. The most robust fix would be to read out the final byte and then
change it to something else (e.g., adding 1 mod 256). But that's awkward
to do in shell. Let's just blindly corrupt 10 bytes instead of 1, which
reduces our chances of an accidental noop to 1 in 2^80.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "checkout" command is one of the main sources of leaks in the test
suite, let's fix the common ones by not leaking from the "struct
branch_info".
Doing this is rather straightforward, albeit verbose, we need to
xstrdup() constant strings going into the struct, and free() the ones
we clobber as we go along.
This also means that we can delete previous partial leak fixes in this
area, i.e. the "path_to_free" accounting added by 96ec7b1e708 (Convert
resolve_ref+xstrdup to new resolve_refdup function, 2011-12-13).
There was some discussion about whether "we should retain the "const
char *" here and cast at free() time, or have it be a "char *". Since
this is not a public API with any sort of API boundary let's use
"char *", as is already being done for the "refname" member of the
same struct.
I.e. the ones that were newly passing when the --state=failed command
was run. I left out "t3040-subprojects-basic.sh" and
"t4131-apply-fake-ancestor.sh" to to optimization-level related
differences similar to the ones noted in[1], except that these would
be something the current 'linux-leaks' job would run into.
Teng Long [Thu, 18 Nov 2021 07:11:14 +0000 (15:11 +0800)]
midx: fix a formatting issue in "multi-pack-index.txt"
There is a formatting issue in "multi-pack-index.html", corresponding
to the nesting bulleted list of a wrong usage in "multi-pack-index.txt"
and this commit fix the problem.
In ASCIIDOC, it doesn't treat an indented character as the
beginning of a sub-list. If we want to write a nested bulleted list, we
could just use ASTERISK without any DASH like:
"
* Level 1 list item
** Level 2 list item
*** Level 3 list item
** Level 2 list item
* Level 1 list item
** Level 2 list item
* Level 1 list item
"
The DASH can be used for bulleted list too, But the DASH is suggested
only to be used as the marker for the first level because the DASH
doesn’t work well or a best practice for nested lists,
like (dash is as level 2 below):
"
* Level 1 list item
- Level 2 list item
* Level 1 list item
"
ASTERISK is recommanded to use because it works intuitively and clearly
("marker length = nesting level") in nested lists, but the DASH can't.
However, when you want to write a non-nested bulleted lists, DASH works
too, like:
"
- Level 1 list item
- Level 1 list item
- Level 1 list item
"
Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Teng Long <dyroneteng@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sat, 13 Nov 2021 20:38:05 +0000 (20:38 +0000)]
SubmittingPatches: fix Asciidoc syntax in "GitHub CI" section
A superfluous ']' was added to the title of the GitHub CI section in f003a91f5c (SubmittingPatches: replace discussion of Travis with GitHub
Actions, 2021-07-22). Remove it.
While at it, format the URL for a GitHub user's workflow runs of Git
between backticks, since if not Asciidoc formats only the first part,
"https://github.com/<Your", as a link, which is not very useful.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Thu, 11 Nov 2021 00:54:16 +0000 (08:54 +0800)]
l10n: ko: fix typos found by git-po-helper
When checking typos in file "po/ko.po", "git-po-helper" reports lots of
false positives because there are no spaces between ASCII and Korean
characters. After applied commit adee197 "(dict: add smudge table for
Korean language, 2021-11-11)" of "git-l10n/git-po-helper" to suppress
these false positives, some easy-to-fix typos are found and fixed.
Josh Steadmon [Thu, 11 Nov 2021 22:34:25 +0000 (14:34 -0800)]
trace2: increment event format version
In 64bc752 (trace2: add trace2_child_ready() to report on background
children, 2021-09-20), we added a new "child_ready" event. In
Documentation/technical/api-trace2.txt, we promise that adding a new
event type will result in incrementing the trace2 event format version
number, but this was not done. Correct this in code & docs.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Calvin Wan [Thu, 11 Nov 2021 22:00:48 +0000 (22:00 +0000)]
protocol-v2.txt: align delim-pkt spec with usage
The current protocol EBNF allows command-request to end with the
capability list, if no command specific arguments follow, but the
protocol requires that after the capability list, there must be a
delim-pkt regardless of the number of command specific arguments. Fixed
the EBNF to match. Both JGit and libgit2's implementation has the
delim-pkt as mandatory. JGit's code is not publicly linkable, but
libgit2 is linked below[1]. As for currently implemented commands on v2
(ls-ref and fetch), the delim packet is already being passed through
object-file: free(*contents) only in read_loose_object() caller
In the preceding commit a free() of uninitialized memory regression in 96e41f58fe1 (fsck: report invalid object type-path combinations,
2021-10-01) was fixed, but we'd still have an issue with leaking
memory from fsck_loose(). Let's fix that issue too.
That issue was introduced in my 31deb28f5e0 (fsck: don't hard die on
invalid object types, 2021-10-01). It can be reproduced under
SANITIZE=leak with the test I added in 093fffdfbec (fsck tests: add
test for fsck-ing an unknown type, 2021-10-01):
./t1450-fsck.sh --run=84 -vixd
In some sense it's not a problem, we lost the same amount of memory in
terms of things malloc'd and not free'd. It just moved from the "still
reachable" to "definitely lost" column in valgrind(1) nomenclature[1],
since we'd have die()'d before.
But now that we don't hard die() anymore in the library let's properly
free() it. Doing so makes this code much easier to follow, since we'll
now have one function owning the freeing of the "contents" variable,
not two.
For context on that memory management pattern the read_loose_object()
function was added in f6371f92104 (sha1_file: add read_loose_object()
function, 2017-01-13) and subsequently used in c68b489e564 (fsck:
parse loose object paths directly, 2017-01-13). The pattern of it
being the task of both sides to free() the memory has been there in
this form since its inception.
Junio C Hamano [Thu, 11 Nov 2021 20:34:41 +0000 (12:34 -0800)]
Revert "connected: do not sort input revisions"
This reverts commit f45022dc2fd692fd024f2eb41a86a66f19013d43,
as this is like breakage in the traversal more likely. In a
history with 10 single strand of pearls,
1-->2-->3--...->7-->8-->9-->10
asking "rev-list --unsorted-input 1 10 --not 9 8 7 6 5 4" fails to
paint the bottom 1 uninteresting as the traversal stops, without
completing the propagation of uninteresting bit starting at 4 down
through 3 and 2 to 1.
projects / rit / log