Taylor Blau [Wed, 19 Mar 2025 22:23:56 +0000 (18:23 -0400)]
http.c: allow custom TCP keepalive behavior via config
curl supports a few options to control when and how often it should
instruct the OS to send TCP keepalives, like KEEPIDLE, KEEPINTVL, and
KEEPCNT. Until this point, there hasn't been a way for users to change
what values are used for these options, forcing them to rely on curl's
defaults.
But we do unconditionally enable TCP keepalives without giving users an
ability to tweak any fine-grained parameters. Ordinarily this isn't a
problem, particularly for users that have fast-enough connections,
and/or are talking to a server that has generous or nonexistent
thresholds for killing a connection it hasn't heard from in a while.
But it can present a problem when one or both of those assumptions fail.
For instance, I can reliably get an in-progress clone to be killed from
the remote end when cloning from some forges while using trickle to
limit my clone's bandwidth.
For those users and others who wish to more finely tune the OS's
keepalive behavior, expose configuration and environment variables which
allow setting curl's KEEPIDLE, KEEPINTVL, and KEEPCNT options.
Note that while KEEPIDLE and KEEPINTVL were added in curl 7.25.0,
KEEPCNT was added much more recently in curl 8.9.0. Per f7c094060c
(git-curl-compat: remove check for curl 7.25.0, 2024-10-23), both
KEEPIDLE and KEEPINTVL are set unconditionally. But since we may be
compiled with a curl that isn't as new as 8.9.0, only set KEEPCNT when
we have CURLOPT_TCP_KEEPCNT to begin with.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 19 Mar 2025 22:23:53 +0000 (18:23 -0400)]
http.c: inline `set_curl_keepalive()`
At the end of `get_curl_handle()` we call `set_curl_keepalive()` to
enable TCP keepalive probes on our CURL handle. `set_curl_keepalive()`
dates back to 47ce115370 (http: use curl's tcp keepalive if available,
2013-10-14), which conditionally compiled different variants of
`set_curl_keepalive()` depending on what version of curl we were
compiled with[^1].
As of f7c094060c (git-curl-compat: remove check for curl 7.25.0,
2024-10-23), we no longer conditionally compile `set_curl_keepalive()`
since we no longer support pre-7.25.0 versions of curl. But the version
of that function that we kept is really just a thin wrapper around
setting the TCP_KEEPALIVE option, so there's no reason to keep it in its
own function.
Inline the definition of `set_curl_keepalive()` to within
`get_curl_handle()` so that the setup of our CURL handle is
self-contained.
[1]: The details are spelled out in 47ce115370, but the gist is curl
7.25.0 and newer use CURLOPT_TCP_KEEPALIVE, older versions use
CURLOPT_SOCKOPTFUNCTION with a custom callback, and older versions
that predate even that option do nothing.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 19 Mar 2025 22:23:50 +0000 (18:23 -0400)]
http.c: introduce `set_long_from_env()` for convenience
In 7059cd99fc (http_init(): Fix config file parsing, 2009-03-09), http.c
gained a new "set_from_env()" function as a convenience function around
conditionally assigning an environment variable to some variable if and
only if the environment variable was set to begin with.
But prior to 7059cd99fc, there were two spots which need to first
strtol() whatever is set in the environment before assigning it to a
long pointer. Both instances stored the result of getenv() in a
temporary variable, and conditionally strtol() it depending on whether
or not getenv() returned NULL.
Replace those two instances with a new cousin of 'set_from_env()' called
'set_long_from_env()', which does what its name suggests. This allows us
to remove the temporary variables and clean up some minor code
duplication while also adding more robust error handling.
More importantly, however, it prepares us for a future commit which will
introduce more instances of assigning an environment variable to a long.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 19 Mar 2025 22:23:46 +0000 (18:23 -0400)]
http.c: remove unnecessary casts to long
When parsing 'http.lowSpeedLimit' and 'http.lowSpeedTime', we explicitly
cast the result of 'git_config_int()' to a long before assignment. This
cast has been in place since all the way back in 58e60dd203 (Add support
for pushing to a remote repository using HTTP/DAV, 2005-11-02).
But that cast has always been unnecessary, since long is guaranteed to
be at least as wide as int. Let's drop the cast accordingly.
Noticed-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Taylor Blau <me@ttaylorr.com> Acked-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Mon, 10 Mar 2025 11:07:56 +0000 (12:07 +0100)]
git-clone doc: fix indentation
Commit bc26f7690a (clone: make it possible to specify --tags,
2025-02-06) added a new paragraph in the middle of this list item. By
adding an empty line rather than using a list continuation, we broke the
list continuation, with the new paragraph ending up funnily indented.
Restore the chain of list continuations.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Peter Krefting [Mon, 10 Mar 2025 16:48:34 +0000 (17:48 +0100)]
l10n: sv.po: Update Swedish translation
- Update for 2.49.0.
- Fix numerous typos found by spelling checker.
- Fix more straight quotes.
- Harmonize translation of "blob" (to "blob", not "blobb").
- Harmonize translation of "reflog" (to "referenslogg").
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Taylor Blau [Fri, 7 Mar 2025 23:27:03 +0000 (18:27 -0500)]
fetch: fix following tags when fetching specific OID
In 3f763ddf28 (fetch: set remote/HEAD if it does not exist, 2024-11-22),
unconditionally adds "HEAD" to the list of ref prefixes we send to the
server.
This breaks a core assumption that the list of prefixes we send to the
server is complete. We must either send all prefixes we care about, or
none at all (in the latter case the server then advertises everything).
The tag following code is careful to only add "refs/tags/" to the list
of prefixes if there are already entries in the prefix list. But because
the new code from 3f763ddf28 runs after the tag code, and because it
unconditionally adds to the prefix list, we may end up with a prefix
list that _should_ have "refs/tags/" in it, but doesn't.
When that is the case, the server does not advertise any tags, and our
auto-following breaks because we never learned about any tags in the
first place.
Fix this by only adding "HEAD" to the ref prefixes when we know that we
are already limiting the advertisement. In either case we'll learn about
HEAD (either through the limited advertisement, or implicitly through a
full advertisement).
Reported-by: Igor Todorovski <itodorov@ca.ibm.com> Co-authored-by: Jeff King <peff@peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Toon Claes [Fri, 7 Mar 2025 14:18:08 +0000 (15:18 +0100)]
help: print zlib-ng version number
When building against zlib-ng, the header file `zlib.h` is not included,
but `zlib-ng.h` is included instead. It's `zlib.h` that defines
`ZLIB_VERSION` and that macro is used to print out zlib version in
`git-version(1)` with `--build-options`. But when it's not defined, no
version is printed.
`zlib-ng.h` defines another macro: `ZLIBNG_VERSION`. Use that macro to
print the zlib-ng version in `git version --build-options` when it's
set. Otherwise fallback to `ZLIB_VERSION`.
Signed-off-by: Toon Claes <toon@iotcl.com> Helped-by: Patrick Steinhardt <ps@pks.im> Reviewed-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Toon Claes [Fri, 7 Mar 2025 14:18:07 +0000 (15:18 +0100)]
help: include git-zlib.h to print zlib version
In 41f1a8435a (git-compat-util: move include of "compat/zlib.h" into
"git-zlib.h", 2025-01-28) some code was refactored to enable easier
linking against zlib-ng.
This removed `zlib.h` being indirectly included in `help.c`. As this
file uses `ZLIB_VERSION` to print the version number of zlib when
running git-version(1) with `--build-options`, this resulted in a
regression.
Include `git-zlib.h` directly into `help.c` to print zlib version
information. This brings back the zlib version in the output of
`git version --build-options`.
Signed-off-by: Toon Claes <toon@iotcl.com> Reviewed-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 6 Mar 2025 22:06:31 +0000 (14:06 -0800)]
Merge branch 'js/win-2.49-build-fixes'
Hotfix to help building Git-for-Windows.
* js/win-2.49-build-fixes:
cmake: generalize the handling of the `CLAR_TEST_OBJS` list
meson: fix sorting
ident: stop assuming that `gw_gecos` is writable
Junio C Hamano [Thu, 6 Mar 2025 22:06:31 +0000 (14:06 -0800)]
Merge branch 'pw/repo-layout-doc-update'
Some future breaking changes would remove certain parts of the
default repository, which were still described even when the
documents were built for the future with WITH_BREAKING_CHANGES.
* pw/repo-layout-doc-update:
docs: fix repository-layout when building with breaking changes
cmake: generalize the handling of the `CLAR_TEST_OBJS` list
A late-comer to the v2.49.0 party, `sk/unit-test-oid`, added yet another
array item to `CLAR_TEST_OBJS`, causing the `win+VS build` job to fail
with symptoms like this one:
unit-tests-lib.lib(u-oid-array.obj) : error LNK2019: unresolved
external symbol cl_parse_any_oid referenced in function fill_array
This is a similar scenario to the one that forced me to write 8afda42fce60 (cmake: generalize the handling of the `UNIT_TEST_OBJS`
list, 2024-09-18): The hard-coded echo of `CLAR_TEST_OBJS` in
`CMakeLists.txt` that recapitulates faithfully what was already
hard-coded in `Makefile` would either have to be updated whack-a-mole
style, or generalized.
Just like I chose the latter option for `UNIT_TEST_OBJS`, I now do the
same for `CLAR_TEST_OBJS`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 904339edbd80 (Introduce support for the Meson build system,
2024-12-06) the `meson.build` file was introduced, adding also a
Windows-specific list of source files. This list was obviously meant to
be sorted alphabetically, but there is one mistake. Let's fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 590e081dea7c (ident: add NO_GECOS_IN_PWENT for systems without
pw_gecos in struct passwd, 2011-05-19), code was introduced to iterate
over the `gw_gecos` field; The loop variable is of type `char *`, which
assumes that `gw_gecos` is writable.
However, it is not necessarily writable (and it is a bad idea to have it
writable in the first place), so let's switch the loop variable type to
`const char *`.
This is not a new problem, but what is new is the Meson build. While it
does not trigger in CI builds, imitating the commands of
`ci/run-build-and-tests.sh` in a regular Git for Windows SDK (`meson
setup build . --fatal-meson-warnings --warnlevel 2 --werror --wrap-mode
nofallback -Dfuzzers=true` followed by `meson compile -C build --`
results in this beautiful error:
"cc" [...] -o libgit.a.p/ident.c.obj "-c" ../ident.c
../ident.c: In function 'copy_gecos':
../ident.c:68:18: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
68 | for (src = get_gecos(w); *src && *src != ','; src++) {
| ^
cc1.exe: all warnings being treated as errors
Now, why does this not trigger in CI? The answer is as simple as it is
puzzling: The `win+Meson` job completely side-steps Git for Windows'
development environment, opting instead to use the GCC that is on the
`PATH` in GitHub-hosted `windows-latest` runners. That GCC is pinned to
v12.2.0 and targets the UCRT (unlikely to change any time soon, see
https://github.com/actions/runner-images/blob/win25/20250303.1/images/windows/toolsets/toolset-2022.json#L132-L141).
That is in stark contrast to Git for Windows, which uses GCC v14.2.0 and
targets MSVCRT. Git for Windows' `Makefile`-based build also obviously
uses different compiler flags, otherwise this compile error would have
had plenty of opportunity in almost 14 years to surface.
In other words, contrary to my expectations, the `win+Meson` job is
ill-equipped to replace the `win build` job because it exercises a
completely different tool version/compiler flags vector than what Git
for Windows needs.
Nevertheless, there is currently this huge push, including breaking
changes after -rc1 and all, for switching to Meson. Therefore, we need
to make it work, somehow, even in Git for Windows' SDK, hence this
patch, at this point in time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 5 Mar 2025 18:37:44 +0000 (10:37 -0800)]
Merge branch 'cc/lop-remote'
Large-object promisor protocol extension.
* cc/lop-remote:
doc: add technical design doc for large object promisors
promisor-remote: check advertised name or URL
Add 'promisor-remote' capability to protocol v2
Junio C Hamano [Wed, 5 Mar 2025 18:37:43 +0000 (10:37 -0800)]
Merge branch 'sk/unit-test-oid'
Convert a few unit tests to the clar framework.
* sk/unit-test-oid:
t/unit-tests: convert oidtree test to use clar test framework
t/unit-tests: convert oidmap test to use clar test framework
t/unit-tests: convert oid-array test to use clar test framework
t/unit-tests: implement clar specific oid helper functions
Junio C Hamano [Wed, 5 Mar 2025 18:37:43 +0000 (10:37 -0800)]
Merge branch 'ps/path-sans-the-repository'
The path.[ch] API takes an explicit repository parameter passed
throughout the callchain, instead of relying on the_repository
singleton instance.
* ps/path-sans-the-repository:
path: adjust last remaining users of `the_repository`
environment: move access to "core.sharedRepository" into repo settings
environment: move access to "core.hooksPath" into repo settings
repo-settings: introduce function to clear struct
path: drop `git_path()` in favor of `repo_git_path()`
rerere: let `rerere_path()` write paths into a caller-provided buffer
path: drop `git_common_path()` in favor of `repo_common_path()`
worktree: return allocated string from `get_worktree_git_dir()`
path: drop `git_path_buf()` in favor of `repo_git_path_replace()`
path: drop `git_pathdup()` in favor of `repo_git_path()`
path: drop unused `strbuf_git_path()` function
path: refactor `repo_submodule_path()` family of functions
submodule: refactor `submodule_to_gitdir()` to accept a repo
path: refactor `repo_worktree_path()` family of functions
path: refactor `repo_git_path()` family of functions
path: refactor `repo_common_path()` family of functions
Phillip Wood [Wed, 5 Mar 2025 10:42:37 +0000 (10:42 +0000)]
docs: fix repository-layout when building with breaking changes
Since commit 8ccc75c2452 (remote: announce removal of "branches/" and
"remotes/", 2025-01-22) enabling WITH_BREAKING_CHANGES when building git
removes support for reading branches from ".git/branches" and remotes
from ".git/remotes". However those locations are still documented in
gitrepository-layout.adoc even though the build does not support them.
Rectify this by adding a new document attribute "with-breaking-changes"
and use it to make the inclusion of those sections of the documentation
conditional. Note that the name of the attribute does not match the test
prerequisite WITHOUT_BREAKING_CHANGES added in c5bc9a7f94a (Makefile:
wire up build option for deprecated features, 2025-01-22). This is to
avoid the awkward double negative ifndef::without_breaking_changes for
documentation that should be included when WITH_BREAKING_CHANGES is
enabled. The test prerequisite will be renamed to match the
documentation attribute in a future patch series.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Tue, 4 Mar 2025 16:11:54 +0000 (17:11 +0100)]
reftable: release name on reftable_reader_new() error
If block_source_read_block() or parse_footer() fail, we leak the "name"
member of struct reftable_reader in reftable_reader_new(). Release it.
Reported by: H Z <shiyuyuranzh@gmail.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Mon, 3 Mar 2025 20:44:07 +0000 (15:44 -0500)]
howto/new-command: update reference to builtin docs
Commit ec14d4ecb5 (builtin.h: take over documentation from
api-builtin.txt, 2017-08-02) deleted api-builtin.txt and moved the
contents into builtin.h. Most of the references were fixed in d85e9448dd (new-command.txt: update reference to builtin docs,
2023-02-04), but one remained. Fix it.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Mon, 3 Mar 2025 20:44:01 +0000 (15:44 -0500)]
doc: remove unneeded .gitattributes
The top-level .gitattributes file contains entries for the Documentation
tree. Documentation/.gitattributes has not been touched since it was
added in 14f9e128d3 (Define the project whitespace policy, 2008-02-10).
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Mon, 3 Mar 2025 20:44:00 +0000 (15:44 -0500)]
.gitattributes: more *.txt -> *.adoc updates
All Documentation files now end in .adoc. Update the entries for
git-merge.adoc, gitk.adoc, and user-manual.adoc to properly set the
conflict-marker-size attribute.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Mon, 3 Mar 2025 20:43:59 +0000 (15:43 -0500)]
t0450: *.txt -> *.adoc fixes
After 1f010d6bdf (doc: use .adoc extension for AsciiDoc files,
2025-01-20), we no longer matched any files in this test. The result is
that we did not test for mismatches in the documentation and --help
output.
Adjust the test to look at the renamed *.adoc files.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 28 Feb 2025 17:28:21 +0000 (09:28 -0800)]
BreakingChanges: clarify the procedure
The point behind a compile-time switch is to ensure that we have a
mechanism to hide myriad of backward incompatible changes that may
be prepared and accumulated over time, yet make them available for
testing any time during the development toward the big version
boundary. Add a few words to stress that point.
Since the document was first written, we have added the CI job that
the document anticipated us to have. Rephrase to state the current
status.
The discussion in [*1*] made us abandon the "feature.git3" based
runtime switching of behaviour and instead adopt the compile-time
switching mechanism, but a stray sentence about runtime switching
still remained in the final text by mistake. Remove it.
Christian Couder [Tue, 18 Feb 2025 11:32:04 +0000 (12:32 +0100)]
doc: add technical design doc for large object promisors
Let's add a design doc about how we could improve handling liarge blobs
using "Large Object Promisors" (LOPs). It's a set of features with the
goal of using special dedicated promisor remotes to store large blobs,
and having them accessed directly by main remotes and clients.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 3 Mar 2025 16:53:01 +0000 (08:53 -0800)]
Merge branch 'ps/build-meson-fixes-0130'
Assorted fixes and improvements to the build procedure based on
meson.
* ps/build-meson-fixes-0130:
gitlab-ci: restrict maximum number of link jobs on Windows
meson: consistently use custom program paths to resolve programs
meson: fix overwritten `git` variable
meson: prevent finding sed(1) in a loop
meson: improve handling of `sane_tool_path` option
meson: improve PATH handling
meson: drop separate version library
meson: stop linking libcurl into all executables
meson: introduce `libgit_curl` dependency
meson: simplify use of the common-main library
meson: inline the static 'git' library
meson: fix OpenSSL fallback when not explicitly required
meson: fix exec path with enabled runtime prefix
projects / rit / log