Jeff King [Wed, 8 Apr 2026 17:20:55 +0000 (13:20 -0400)]
run_processes_parallel(): fix order of sigpipe handling
In commit ec0becacc9 (run-command: add stdin callback for
parallelization, 2026-01-28), we taught run_processes_parallel() to
ignore SIGPIPE, since we wouldn't want a write() to a broken pipe of one
of the children to take down the whole process.
But there's a subtle ordering issue. After we ignore SIGPIPE, we call
pp_init(), which installs its own cleanup handler for multiple signals
using sigchain_push_common(), which includes SIGPIPE. So if we receive
SIGPIPE while writing to a child, we'll trigger that handler first, pop
it off the stack, and then re-raise (which is then ignored because of
the SIG_IGN we pushed first).
But what does that handler do? It tries to clean up all of the child
processes, under the assumption that when we re-raise the signal we'll
be exiting the process!
So a hook that exits without reading all of its input will cause us to
get SIGPIPE, which will put us in a signal handler that then tries to
kill() that same child.
This seems to be mostly harmless on Linux. The process has already
exited by this point, and though kill() does not complain (since the
process has not been reaped with a wait() call), it does not affect the
exit status of the process.
However, this seems not to be true on all platforms. This case is
triggered by t5401.13, "pre-receive hook that forgets to read its
input". This test fails on NonStop since that hook was converted to the
run_processes_parallel() API.
We can fix it by reordering the code a bit. We should run pp_init()
first, and then push our SIG_IGN onto the stack afterwards, so that it
is truly ignored while feeding the sub-processes.
Note that we also reorder the popping at the end of the function, too.
This is not technically necessary, as we are doing two pops either way,
but now the pops will correctly match their pushes.
This also fixes a related case that we can't test yet. If we did have
more than one process to run, then one child causing SIGPIPE would cause
us to kill() all of the children (which might still actually be
running). But the hook API is the only user of the new feed_pipe
feature, and it does not yet support parallel hook execution. So for now
we'll always execute the processes sequentially. Once parallel hook
execution exists, we'll be able to add a test which covers this.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 8 Apr 2026 17:19:18 +0000 (10:19 -0700)]
Merge branch 'tc/replay-ref'
The experimental `git replay` command learned the `--ref=<ref>` option
to allow specifying which ref to update, overriding the default behavior.
* tc/replay-ref:
replay: allow to specify a ref with option --ref
replay: use stuck form in documentation and help message
builtin/replay: mark options as not negatable
Junio C Hamano [Wed, 8 Apr 2026 17:19:17 +0000 (10:19 -0700)]
Merge branch 'ng/add-files-to-cache-wo-rename'
add_files_to_cache() used diff_files() to detect only the paths that
are different between the index and the working tree and add them,
which does not need rename detection, which interfered with unnecessary
conflicts.
* ng/add-files-to-cache-wo-rename:
read-cache: disable renames in add_files_to_cache
Junio C Hamano [Wed, 8 Apr 2026 17:19:17 +0000 (10:19 -0700)]
Merge branch 'ps/reftable-portability'
Update reftable library part with what is used in libgit2 to improve
portability to different target codebases and platforms.
* ps/reftable-portability:
reftable/system: add abstraction to mmap files
reftable/system: add abstraction to retrieve time in milliseconds
reftable/fsck: use REFTABLE_UNUSED instead of UNUSED
reftable/stack: provide fsync(3p) via system header
reftable: introduce "reftable-system.h" header
Junio C Hamano [Wed, 8 Apr 2026 17:19:17 +0000 (10:19 -0700)]
Merge branch 'ps/odb-cleanup'
Various code clean-up around odb subsystem.
* ps/odb-cleanup:
odb: drop unneeded headers and forward decls
odb: rename `odb_has_object()` flags
odb: use enum for `odb_write_object` flags
odb: rename `odb_write_object()` flags
treewide: use enum for `odb_for_each_object()` flags
CodingGuidelines: document our style for flags
Adrian Ratiu [Wed, 8 Apr 2026 16:11:48 +0000 (19:11 +0300)]
t1800: add &&-chains to test helper functions
Add the missing &&'s so we properly propagate failures
between commands in the hook helper functions.
Also add a missing mkdir -p arg (found by adding the &&).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file: avoid ODB transaction when not writing objects
In ce1661f9da (odb: add transaction interface, 2025-09-16), existing
ODB transaction logic is adapted to create a transaction interface
at the ODB layer. The intent here is for the ODB transaction
interface to eventually provide an object source agnostic means to
manage transactions.
An unintended consequence of this change though is that
`object-file.c:index_fd()` may enter the ODB transaction path even
when no object write is requested. In non-repository contexts, this
can result in a NULL dereference and segfault. One such case occurs
when running git-diff(1) outside of a repository with
"core.bigFileThreshold" forcing the streaming path in `index_fd()`:
$ echo foo >foo
$ echo bar >bar
$ git -c core.bigFileThreshold=1 diff -- foo bar
In this scenario, the caller only needs to compute the object ID. Object
hashing does not require an ODB, so starting a transaction is both
unnecessary and invalid.
Fix the bug by avoiding the use of ODB transactions in `index_fd()` when
callers are only interested in computing the object hash.
Reported-by: Luca Stefani <luca.stefani.ge1@gmail.com> Signed-off-by: Justin Tobler <jltobler@gmail.com>
[jc: adjusted to fd13909e (Merge branch 'jt/odb-transaction', 2025-10-02)] Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check in "receive-pack" to prevent a checked out branch from
getting updated via updateInstead mechanism has been corrected.
* ps/receive-pack-updateinstead-in-worktree:
receive-pack: use worktree HEAD for updateInstead
t5516: clean up cloned and new-wt in denyCurrentBranch and worktrees test
t5516: test updateInstead with worktree and unborn bare HEAD
The way the "git log -L<range>:<file>" feature is bolted onto the
log/diff machinery is being reworked a bit to make the feature
compatible with more diff options, like -S/G.
* mm/line-log-use-standard-diff-output:
doc: note that -L supports patch formatting and pickaxe options
t4211: add tests for -L with standard diff options
line-log: route -L output through the standard diff pipeline
line-log: fix crash when combined with pickaxe options
Junio C Hamano [Tue, 7 Apr 2026 21:59:26 +0000 (14:59 -0700)]
Merge branch 'ps/fsck-wo-the-repository'
Internals of "git fsck" have been refactored to not depend on the
global `the_repository` variable.
* ps/fsck-wo-the-repository:
builtin/fsck: stop using `the_repository` in error reporting
builtin/fsck: stop using `the_repository` when marking objects
builtin/fsck: stop using `the_repository` when checking packed objects
builtin/fsck: stop using `the_repository` with loose objects
builtin/fsck: stop using `the_repository` when checking reflogs
builtin/fsck: stop using `the_repository` when checking refs
builtin/fsck: stop using `the_repository` when snapshotting refs
builtin/fsck: fix trivial dependence on `the_repository`
fsck: drop USE_THE_REPOSITORY
fsck: store repository in fsck options
fsck: initialize fsck options via a function
fetch-pack: move fsck options into function scope
Junio C Hamano [Tue, 7 Apr 2026 21:59:25 +0000 (14:59 -0700)]
Merge branch 'ps/commit-graph-overflow-fix'
Fix a regression in writing the commit-graph where commits with dates
exceeding 34 bits (beyond year 2514) could cause an underflow and
crash Git during the generation data overflow chunk writing.
Junio C Hamano [Mon, 6 Apr 2026 22:42:51 +0000 (15:42 -0700)]
Merge branch 'jk/c23-const-preserving-fixes'
Adjust the codebase for C23 that changes functions like strchr()
that discarded constness when they return a pointer into a const
string to preserve constness.
* jk/c23-const-preserving-fixes:
config: store allocated string in non-const pointer
rev-parse: avoid writing to const string for parent marks
revision: avoid writing to const string for parent marks
rev-parse: simplify dotdot parsing
revision: make handle_dotdot() interface less confusing
Junio C Hamano [Mon, 6 Apr 2026 22:42:50 +0000 (15:42 -0700)]
Merge branch 'aa/reap-transport-child-processes'
A few code paths that spawned child processes for network
connection weren't wait(2)ing for their children and letting "init"
reap them instead; they have been tightened.
* aa/reap-transport-child-processes:
transport-helper, connect: use clean_on_exit to reap children on abnormal exit
Junio C Hamano [Mon, 6 Apr 2026 22:42:49 +0000 (15:42 -0700)]
Merge branch 'tb/stdin-packs-excluded-but-open'
pack-objects's --stdin-packs=follow mode learns to handle
excluded-but-open packs.
* tb/stdin-packs-excluded-but-open:
repack: mark non-MIDX packs above the split as excluded-open
pack-objects: support excluded-open packs with --stdin-packs
t7704: demonstrate failure with once-cruft objects above the geometric split
pack-objects: refactor `read_packs_list_from_stdin()` to use `strmap`
pack-objects: plug leak in `read_stdin_packs()`
Object name handling (disambiguation and abbreviation) has been
refactored to be backend-generic, moving logic into the respective
object database backends.
* ps/odb-generic-object-name-handling:
odb: introduce generic `odb_find_abbrev_len()`
object-file: move logic to compute packed abbreviation length
object-name: move logic to compute loose abbreviation length
object-name: simplify computing common prefixes
object-name: abbreviate loose object names without `disambiguate_state`
object-name: merge `update_candidates()` and `match_prefix()`
object-name: backend-generic `get_short_oid()`
object-name: backend-generic `repo_collect_ambiguous()`
object-name: extract function to parse object ID prefixes
object-name: move logic to iterate through packed prefixed objects
object-name: move logic to iterate through loose prefixed objects
odb: introduce `struct odb_for_each_object_options`
oidtree: extend iteration to allow for arbitrary return codes
oidtree: modernize the code a bit
object-file: fix sparse 'plain integer as NULL pointer' error
René Scharfe [Mon, 6 Apr 2026 09:31:21 +0000 (11:31 +0200)]
history: fix short help for argument of --update-refs
"print" is not a valid argument for --update-refs. List both valid
alternatives literally in the argh string, consistent with documentation
and usage string.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
1edeb9a (Win32: warn if the console font doesn't support Unicode,
2014-06-10) introduced both code to detect the current console font on
Windows Vista and newer and a fallback for older systems to detect the
default console font and issue a warning if that font doesn't support
unicode.
Since we haven't supported any Windows older than Vista in almost a
decade, we don't need to keep the workaround.
Signed-off-by: Matthias Aßhauer <mha1993@live.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unify and bump _WIN32_WINNT definition to Windows 8.1
Git for Windows doesn't support anything prior to Windows 8.1 since 2.47.0
and Git followed along with commits like ce6ccba (mingw: drop Windows
7-specific work-around, 2025-08-04).
There is no need to pretend to the compiler that we still support Windows
Vista, just to lock us out of easy access to newer APIs. There is also no
need to have conflicting and unused definitions claiming we support some
versions of Windows XP or even Windows NT 4.0.
Bump all definitions of _WIN32_WINNT to a realistic value of Windows 8.1.
This will also simplify code for a followup commit that will improve cpu
core detection on multi-socket systems.
Signed-off-by: Matthias Aßhauer <mha1993@live.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 85127bcdea ("backfill: assume --sparse when sparse-checkout is
enabled") intended for 'git backfill' to consult the repository
configuration when the user does not pass '--sparse' or
'--no-sparse' on the command line. It added the sentinel check:
if (ctx->sparse < 0)
ctx->sparse = cfg->apply_sparse_checkout;
However, the ctx->sparse field is initialized to 0 instead of -1,
so this guard never triggers. Consequently, the repository config
(core.sparseCheckout) is never checked, and the command always
performs a full backfill even when sparse-checkout is enabled.
Fix this by initializing ctx->sparse to -1, ensuring the existing
fallback logic correctly reads the repository configuration when
no explicit flags are provided.
Add a test to verify that 'git backfill' automatically respects
sparse-checkout settings when no flags are passed.
Signed-off-by: Trieu Huynh <vikingtc4@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 3 Apr 2026 22:24:45 +0000 (15:24 -0700)]
Merge branch 'ps/dash-buggy-0.5.13-workaround'
The way dash 0.5.13 handles non-ASCII contents in here-doc
is buggy and breaks our existing tests, which unfortunately
have been rewritten to avoid triggering the bug.
* ps/dash-buggy-0.5.13-workaround:
t9300: work around partial read bug in Dash v0.5.13
t: work around multibyte bug in quoted heredocs with Dash v0.5.13
Junio C Hamano [Fri, 3 Apr 2026 20:01:08 +0000 (13:01 -0700)]
Merge branch 'ar/config-hook-cleanups'
Code clean-up around the recent "hooks defined in config" topic.
* ar/config-hook-cleanups:
hook: reject unknown hook names in git-hook(1)
hook: show disabled hooks in "git hook list"
hook: show config scope in git hook list
hook: introduce hook_config_cache_entry for per-hook data
t1800: add test to verify hook execution ordering
hook: make consistent use of friendly-name in docs
hook: replace hook_list_clear() -> string_list_clear_func()
hook: detect & emit two more bugs
hook: rename cb_data_free/alloc -> hook_data_free/alloc
hook: fix minor style issues
builtin/receive-pack: properly init receive_hook strbuf
hook: move unsorted_string_list_remove() to string-list.[ch]
Junio C Hamano [Fri, 3 Apr 2026 20:01:08 +0000 (13:01 -0700)]
Merge branch 'ds/backfill-revs'
`git backfill` learned to accept revision and pathspec arguments.
* ds/backfill-revs:
t5620: test backfill's unknown argument handling
path-walk: support wildcard pathspecs for blob filtering
backfill: work with prefix pathspecs
backfill: accept revision arguments
t5620: prepare branched repo for revision tests
revision: include object-name.h
Junio C Hamano [Fri, 3 Apr 2026 20:01:08 +0000 (13:01 -0700)]
Merge branch 'mf/format-patch-commit-list-format'
Improve the recently introduced `git format-patch
--commit-list-format` (formerly `--cover-letter-format`) option,
including a new "modern" preset and better CLI ergonomics.
* mf/format-patch-commit-list-format:
format-patch: --commit-list-format without prefix
format-patch: add preset for --commit-list-format
format-patch: wrap generate_commit_list_cover()
format.commitListFormat: strip meaning from empty
docs/pretty-formats: add %(count) and %(total)
format-patch: rename --cover-letter-format option
format-patch: refactor generate_commit_list_cover
pretty.c: better die message %(count) and %(total)
"git format-patch --cover-letter" learns to use a simpler format
instead of the traditional shortlog format to list its commits with
a new --cover-letter-format option and format.commitListFormat
configuration variable.
* mf/format-patch-cover-letter-format:
docs: add usage for the cover-letter fmt feature
format-patch: add commitListFormat config
format-patch: add ability to use alt cover format
format-patch: move cover letter summary generation
pretty.c: add %(count) and %(total) placeholders
The `mingw_strftime()` wrapper exists to work around msvcrt.dll's
incomplete `strftime()` implementation by dynamically loading the
version from ucrtbase.dll at runtime via `LoadLibrary()` +
`GetProcAddress()`. When the binary is already linked against UCRT
(i.e. when building in the UCRT64 environment), the linked-in
`strftime()` is the ucrtbase.dll version, making the dynamic loading
needless churn: It's calling the very same code.
Simply guard both the declaration and implementation so that the
unnecessary work-around is skipped in UCRT builds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a companion patch of 3b9b2c2a29a (compat/posix: introduce
writev(3p) wrapper, 2026-03-13) where support for using the `writev()`
wrapper was introduced in the `Makefile` and the Meson-based build, but
the CMake build still needs that treatment, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document po/AGENTS.md-driven AI workflows (with an example prompt)
before the PO helper section, cross-reference git-po-helper, and
summarize quality checks plus optional agent integration in the PO
helper section.
Jiang Xin [Wed, 25 Feb 2026 06:19:25 +0000 (14:19 +0800)]
l10n: docs: add review instructions in AGENTS.md
Add a new "Reviewing po/XX.po" section to po/AGENTS.md that provides
comprehensive guidance for AI agents to review translation files.
Translation diffs lose context, especially for multi-line msgid and
msgstr entries. Some LLMs ignore context and cannot evaluate
translations accurately; others rely on scripts to search for context
in source files, making the review process time-consuming. To address
this, git-po-helper implements the compare subcommand, which extracts
new or modified translations with full context (complete msgid/msgstr
pairs), significantly improving review efficiency.
A limitation is that the extracted content lacks other
already-translated content for reference, which may affect terminology
consistency. This is mitigated by including a glossary in the PO file
header. git-po-helper-generated review files include the header entry
and glossary (if present) by default.
The review workflow leverages git-po-helper subcommands:
- git-po-helper compare: Extract new or changed entries between two
versions of a PO file into a valid PO file for review. Supports
multiple modes:
* Compare HEAD with the working tree (local changes)
* Compare a commit's parent with the commit (--commit)
* Compare a commit with the working tree (--since)
* Compare two arbitrary revisions (-r)
- git-po-helper msg-select: Split large review files into smaller
batches by entry index range for manageable review sessions. Supports
range formats like "-50" (first 50), "51-100", "101-" (to end).
Jiang Xin [Sun, 15 Feb 2026 06:06:19 +0000 (14:06 +0800)]
l10n: docs: add translation instructions in AGENTS.md
Add a new "Translating po/XX.po" section to po/AGENTS.md with detailed
workflow and procedures for AI agents to translate language-specific PO
files. Users can invoke AI-assisted translation in coding tools with a
prompt such as:
"Translate the po/XX.po file by referring to @po/AGENTS.md"
Translation results serve as drafts; human contributors must review and
approve before submission.
To address the low translation efficiency of some LLMs, batch
translation replaces entry-by-entry translation. git-po-helper
implements a gettext JSON format for translation files, replacing PO
format during translation to enable batch processing.
The git-po-helper flow reduces the number of turns (86 → 56) with
similar execution time; the bottleneck appears to be LLM processing
rather than network interaction.
Jiang Xin [Sun, 15 Feb 2026 03:53:27 +0000 (11:53 +0800)]
l10n: docs: add update PO instructions in AGENTS.md
Add a new section to po/AGENTS.md to provide clear instructions for
updating language-specific PO files. The improved documentation
significantly reduces both conversation turns and execution time.
Performance evaluation with the Qwen model:
# Before: instructions in po/README.md; the custom prompt
# references po/README.md during execution
git-po-helper agent-test --runs=5 --agent=qwen update-po \
--prompt="Update po/zh_CN.po according to po/README.md"
# After: instructions in po/AGENTS.md; the built-in prompt
# references po/AGENTS.md during execution
git-po-helper agent-test --runs=5 --agent=qwen update-po
Benchmark results (5-run average):
| Metric | Before | After | Improvement |
|-------------|---------|--------|-------------|
| Turns | 22 | 4 | -82% |
| Exec. time | 38s | 9s | -76% |
| Turn range | 17-39 | 3-9 | |
| Time range | 25s-68s | 7s-14s | |
Jiang Xin [Sat, 14 Feb 2026 06:08:46 +0000 (14:08 +0800)]
l10n: docs: add AGENTS.md with update POT instructions
Add a new documentation file po/AGENTS.md that provides agent-specific
instructions for generating or updating po/git.pot, separating them
from the general po/README.md. This separation allows for more targeted
optimization of AI agent workflows.
Performance evaluation with the Qwen model:
# Before: No agent-specific instructions; use po/README.md for
# reference.
git-po-helper agent-test --runs=5 --agent=qwen update-pot \
--prompt="Update po/git.pot according to po/README.md"
# Phase 1: add the instructions to po/README.md; the prompt
# references po/README.md during execution
git-po-helper agent-test --runs=5 --agent=qwen update-pot \
--prompt="Update po/git.pot according to po/README.md"
# Phase 2: add the instructions to po/AGENTS.md; use the built-in
# prompt that references po/AGENTS.md during execution
git-po-helper agent-test --runs=5 --agent=qwen update-pot
Benchmark results (5-run average):
Phase 1 - Optimizing po/README.md:
| Metric | Before | Phase 1 | Improvement |
|-------------|---------|---------|-------------|
| Turns | 17 | 5 | -71% |
| Exec. time | 34s | 14s | -59% |
| Turn range | 3-36 | 3-7 | |
| Time range | 10s-59s | 9s-19s | |
| Metric | Before | Phase 2 | Improvement |
|-------------|---------|---------|-------------|
| Turns | 17 | 3 | -82% |
| Exec. time | 34s | 8s | -76% |
| Turn range | 3-36 | 3-3 | |
| Time range | 10s-59s | 6s-9s | |
Separating agent-specific instructions into AGENTS.md provides:
- More focused and concise instructions for AI agents
- Cleaner README.md for human readers
- An additional 11% reduction in turns and 17% reduction in execution
time
- More consistent behavior (turn range reduced from 3-7 to 3-3)
Jiang Xin [Wed, 4 Feb 2026 03:39:22 +0000 (11:39 +0800)]
l10n: add .gitattributes to simplify location filtering
To simplify the location filtering process for l10n contributors when
committing po/XX.po files, add filter attributes for selected PO
files to the repository. This ensures all contributors automatically
get the same filter configuration without manual setup in
.git/info/attributes.
The default filter (gettext-no-location) is applied to all .po files
except:
- Legacy, unmaintained PO files that still contain location comments.
Leaving the filter off avoids index vs working-tree discrepancies for
these files. The CI pipeline will report an error when future updates
touch these legacy files.
- Some PO files use a different filter that strips only line numbers
from location comments while keeping filenames.
Contributors still need to manually define the filter drivers via
git-config as documented in po/README.md.
Four PO files that use location filtering (po/ca.po, po/es.po, po/ga.po,
po/ru.po) were batch-modified so their on-disk format matches the filter
output (e.g. line wrapping), avoiding index vs working-tree mismatch.
Additionally, po/README.md has been reorganized: the material on
preparing location-less PO files for commit has been moved from
"Updating a XX.po file" to a separate "Preparing a XX.po file for
commit" section. This prevents AI agents from introducing unrelated
operations when updating PO files.
Basically, what's happening here is that we spawn git-fast-import(1) and
wait for it to output a certain string, "progress checkpoint". Curiously
though, what we end up reading is "rogress checkpoint" -- so the first
byte of the expected string is missing.
Same as in the preceding commit, this seems to be a bug in Dash itself
that bisects to c5bf970 (expand: Add multi-byte support to pmatch,
2024-06-02). But other than in the preceding commit, this bug has
already been fixed upstream in 079059a (input: Fix heap-buffer-overflow
in preadbuffer on long lines, 2026-02-11), which is part of v0.5.13.2.
For now though, work around the bug by waiting for the expected output
in a different way. There is no good reason why one version should work
better than the other, but at least the new version doesn't exhibit the
bug. And, if you ask me, it's also slightly easier to read.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: work around multibyte bug in quoted heredocs with Dash v0.5.13
When executing our test suite with Dash v0.5.13.2 one can observe
several test failures that all have the same symptoms: we have a quoted
heredoc that contains multibyte characters, but the final data does not
match what we actually wanted to write. One such example is in t0300,
where we see the diffs like the following:
While seemingly the same, the data that we've written via the heredoc
contains some invisible bytes. The expected hex representation of the
string is:
7065 72c3 ba2e 6769 74 per...git
But what we actually get instead is this string:
7065 7285 02c3 ba02 852e 6769 74 per.......git
What's important to note here is that the multibyte character exists in
both versions. But in the broken version we see that the bytes are
wrapped in a sequence of "85 02" and "02 85". This is the CTLMBCHAR byte
sequence of Dash, which it uses internally to quote multibyte sequences.
As it turns out, this bug was introduced in c5bf970 (expand: Add
multi-byte support to pmatch, 2024-06-02), which adds multibyte support
to more contexts of Dash. One of these contexts seems to be in heredocs,
and Dash _does_ correctly unquote these multibyte sequences when using
an unquoted heredoc. But the bug seems to be that this unquoting does
not happen in quoted heredocs, and the bug still exists on the latest
"master" branch.
For now, work around the bug by using unquoted heredocs instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our codebase we have a couple of wrappers around mmap(3p) that allow
us to reimplement the syscall on platforms that don't have it natively,
like for example Windows. Other projects that embed the reftable library
may have a different infra though to hook up mmap wrappers, but these
are currently hard to integrate.
Provide the infrastructure to let projects easily define the mmap
interface with a custom struct and custom functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/system: add abstraction to retrieve time in milliseconds
We directly call gettimeofday(3p), which may not be available on some
platforms. Provide the infrastructure to let projects easily use their
own implementations of this function.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/fsck: use REFTABLE_UNUSED instead of UNUSED
While we have the reftable-specific `REFTABLE_UNUSED` header, we
accidentally introduced a new usage of the Git-specific `UNUSED` header
into the reftable library in 9051638519 (reftable: add code to
facilitate consistency checks, 2025-10-07).
Convert the site to use `REFTABLE_UNUSED`.
Ideally, we'd move the definition of `UNUSED` into "git-compat-util.h"
so that it becomes in accessible to the reftable library. But this is
unfortunately not easily possible as "compat/mingw-posix.h" requires
this macro, and this header is included by "compat/posix.h".
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/stack: provide fsync(3p) via system header
Users of the reftable library are expected to provide their own function
callback in cases they want to sync(3p) data to disk via the reftable
write options. But if no such function was provided we end up calling
fsync(3p) directly, which may not even be available on some systems.
While dropping the explicit call to fsync(3p) would work, it would lead
to an unsafe default behaviour where a project may have forgotten to set
up the callback function, and that could lead to potential data loss. So
this is not a great solution.
Instead, drop the callback function and make it mandatory for the
project to define fsync(3p). In the case of Git, we can then easily
inject our custom implementation via the "reftable-system.h" header so
that we continue to use `fsync_component()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're including a couple of standard headers like <stdint.h> in a bunch
of locations, which makes it hard for a project to plug in their own
logic for making required functionality available. For us this is for
example via "compat/posix.h", which already includes all of the system
headers relevant to us.
Introduce a new "reftable-system.h" header that allows projects to
provide their own headers. This new header is supposed to contain all
the project-specific bits to provide the POSIX-like environment, and some
additional supporting code. With this change, we thus have the following
split in our system-specific code:
- "reftable/reftable-system.h" is the project-specific header that
provides a POSIX-like environment. Every project is expected to
provide their own implementation.
- "reftable/system.h" contains the project-independent definition of
the interfaces that a project needs to implement. This file should
not be touched by a project.
- "reftable/system.c" contains the project-specific implementation of
the interfaces defined in "system.h". Again, every project is
expected to provide their own implementation.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When option '--onto' is passed to git-replay(1), the command will update
refs from the <revision-range> passed to the command. When using option
'--advance' or '--revert', the argument of that option is a ref that
will be updated.
To enable users to specify which ref to update, add option '--ref'. When
using option '--ref', the refs described above are left untouched and
instead the argument of this option is updated instead.
Because this introduces code paths in replay.c that jump to `out` before
init_basic_merge_options() is called on `merge_opt`, zero-initialize the
struct.
Signed-off-by: Toon Claes <toon@iotcl.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nick Golden [Wed, 1 Apr 2026 19:00:33 +0000 (15:00 -0400)]
read-cache: disable renames in add_files_to_cache
add_files_to_cache() refreshes the index from worktree changes and does
not need rename detection. When unmerged entries and a deleted stage-0
path are present together, rename detection can pair them and rewrite an
unmerged diff pair to point at the deleted path.
That later makes "git commit -a" and "git add -u" try to stat the
deleted path and die with "unable to stat". Disable rename detection in
this callback-driven staging path and add a regression test covering the
crash.
Signed-off-by: Nick Golden <blindmansion@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pipelines of the form "test $(git tag | wc -l) -eq 0" suppress git's
exit code. This means a crash or unexpected failure from git tag would
go undetected. Additionally, the use of $(...) creates a subshell for
each check, which adds unnecessary overhead.
Replace these patterns with test_must_be_empty and test_line_count.
These helpers check the output of git directly from a file, ensuring
git's exit code is captured properly via the preceding "&&" chain.
They also provide better diagnostics on failure by printing the
contents of the file when a check does not pass.
Signed-off-by: Siddharth Shrimali <r.siddharth.shrimali@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-remote '+refs/tags/*:refs/tags/*' https://..." run outside a
repository would dereference a NULL while trying to see if the given
refspec is a single-object refspec, which has been corrected.
* kj/refspec-parsing-outside-repository:
refspec: fix typo in comment
remote-curl: fall back to default hash outside repo
Junio C Hamano [Wed, 1 Apr 2026 17:28:19 +0000 (10:28 -0700)]
Merge branch 'jk/t0061-bat-test-update'
A test to run a .bat file with whitespaces in the name with arguments
with whitespaces in them was flaky in that sometimes it got killed
before it produced expected side effects, which has been rewritten to
make it more robust.
* jk/t0061-bat-test-update:
t0061: simplify .bat test
Junio C Hamano [Wed, 1 Apr 2026 17:28:18 +0000 (10:28 -0700)]
Merge branch 'jk/diff-highlight-more'
Various updates to contrib/diff-highlight, including documentation
updates, test improvements, and color configuration handling.
* jk/diff-highlight-more:
diff-highlight: fetch all config with one process
diff-highlight: allow module callers to pass in color config
diff-highlight: test color config
diff-highlight: use test_decode_color in tests
t: add matching negative attributes to test_decode_color
diff-highlight: check diff-highlight exit status in tests
diff-highlight: drop perl version dependency back to 5.8
diff-highlight: mention build instructions
We've got a couple of functions that accept `odb_write_object()` flags,
but all of them accept the flags as an `unsigned` integer. In fact, we
don't even have an `enum` for the flags field.
Introduce this `enum` and adapt functions accordingly according to our
coding style.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
treewide: use enum for `odb_for_each_object()` flags
We've got a couple of callsites where we pass `odb_for_each_object()`
flags, but accept an `unsigned` flags field instead of the corresponding
enum. Adapt these to accept the enum type instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jayesh Daga [Tue, 31 Mar 2026 10:02:53 +0000 (10:02 +0000)]
cache-tree: use index state repository in trace2 calls
trace2 calls in cache-tree.c use the global 'the_repository',
even though cache_tree_update() has access to an explicit
repository pointer via 'istate->repo'.
Using the global repository can result in incorrect trace2
output when multiple repository instances are in use, as
events may be attributed to the wrong repository.
Use 'istate->repo' in cache_tree_update() to ensure correct
repository attribution.
Other call sites are left unchanged as they do not have
access to a repository instance.
Signed-off-by: Jayesh Daga <jayeshdaga99@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 30 Mar 2026 20:57:02 +0000 (13:57 -0700)]
Merge branch 'jw/object-name-bitset-to-enum'
The unsigned integer that is used as an bitset to specify the kind
of branches interpret_branch_name() function has been changed to
use a dedicated enum type.
* jw/object-name-bitset-to-enum:
object-name: turn INTERPRET_BRANCH_* constants into enum values
projects / rit / log