git submodule foreach: Add --recursive to recurse into nested submodules

In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only operate
on all the submodules in the current repo (which is what is currently done
by 'git submodule foreach'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).

This patch teaches the new --recursive option to the 'git submodule foreach'
command. The patch also includes documentation and selftests.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt
index 97c32fe..326136a 100644 (file)
--- a/Documentation/git-submodule.txt
+++ b/Documentation/git-submodule.txt
@@ -16,7 +16,7 @@ SYNOPSIS
 'git submodule' [--quiet] update [--init] [-N|--no-fetch] [--rebase]
              [--reference <repository>] [--merge] [--] [<path>...]
 'git submodule' [--quiet] summary [--cached] [--summary-limit <n>] [commit] [--] [<path>...]
-'git submodule' [--quiet] foreach <command>
+'git submodule' [--quiet] foreach [--recursive] <command>
 'git submodule' [--quiet] sync [--] [<path>...]
 
 
@@ -138,6 +138,8 @@ foreach::
        Any submodules defined in the superproject but not checked out are
        ignored by this command. Unless given --quiet, foreach prints the name
        of each submodule before evaluating the command.
+       If --recursive is given, submodules are traversed recursively (i.e.
+       the given shell command is evaluated in nested submodules as well).
        A non-zero return from the command in any submodule causes
        the processing to terminate. This can be overridden by adding '|| :'
        to the end of the command.
@@ -210,6 +212,12 @@ OPTIONS
 *NOTE*: Do *not* use this option unless you have read the note
 for linkgit:git-clone[1]'s --reference and --shared options carefully.
 
+--recursive::
+       This option is only valid for the foreach command.
+       Traverse submodules recursively. The operation is performed not
+       only in the submodules of the current repo, but also
+       in any nested submodules inside those submodules (and so on).
+
 <path>...::
        Paths to submodule(s). When specified this will restrict the command
        to only operate on the submodules found at the specified paths.

diff --git a/git-submodule.sh b/git-submodule.sh
index f48f682..c501b7e 100755 (executable)
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -10,7 +10,7 @@ USAGE="[--quiet] add [-b branch] [--reference <repository>] [--] <repository> <p
    or: $dashless [--quiet] init [--] [<path>...]
    or: $dashless [--quiet] update [--init] [-N|--no-fetch] [--rebase] [--reference <repository>] [--merge] [--] [<path>...]
    or: $dashless [--quiet] summary [--cached] [--summary-limit <n>] [commit] [--] [<path>...]
-   or: $dashless [--quiet] foreach <command>
+   or: $dashless [--quiet] foreach [--recursive] <command>
    or: $dashless [--quiet] sync [--] [<path>...]"
 OPTIONS_SPEC=
 . git-sh-setup
@@ -23,6 +23,7 @@ reference=
 cached=
 nofetch=
 update=
+prefix=
 
 # Resolve relative url by appending to parent's url
 resolve_relative_url ()
@@ -249,6 +250,9 @@ cmd_foreach()
                -q|--quiet)
                        GIT_QUIET=1
                        ;;
+               --recursive)
+                       recursive=1
+                       ;;
                -*)
                        usage
                        ;;
@@ -264,9 +268,18 @@ cmd_foreach()
        do
                if test -e "$path"/.git
                then
-                       say "Entering '$path'"
+                       say "Entering '$prefix$path'"
                        name=$(module_name "$path")
-                       (cd "$path" && eval "$@") ||
+                       (
+                               prefix="$prefix$path/"
+                               unset GIT_DIR
+                               cd "$path" &&
+                               eval "$@" &&
+                               if test -n "$recursive"
+                               then
+                                       cmd_foreach "--recursive" "$@"
+                               fi
+                       ) ||
                        die "Stopping at '$path'; script returned non-zero status."
                fi
        done

diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh
index 991aa80..be122c7 100755 (executable)
--- a/t/t7407-submodule-foreach.sh
+++ b/t/t7407-submodule-foreach.sh
@@ -76,4 +76,103 @@ test_expect_success 'test basic "submodule foreach" usage' '
        test_cmp expect actual
 '
 
+test_expect_success 'setup nested submodules' '
+       git clone submodule nested1 &&
+       git clone submodule nested2 &&
+       git clone submodule nested3 &&
+       (
+               cd nested3 &&
+               git submodule add ../submodule submodule &&
+               test_tick &&
+               git commit -m "submodule" &&
+               git submodule init submodule
+       ) &&
+       (
+               cd nested2 &&
+               git submodule add ../nested3 nested3 &&
+               test_tick &&
+               git commit -m "nested3" &&
+               git submodule init nested3
+       ) &&
+       (
+               cd nested1 &&
+               git submodule add ../nested2 nested2 &&
+               test_tick &&
+               git commit -m "nested2" &&
+               git submodule init nested2
+       ) &&
+       (
+               cd super &&
+               git submodule add ../nested1 nested1 &&
+               test_tick &&
+               git commit -m "nested1" &&
+               git submodule init nested1
+       )
+'
+
+test_expect_success 'use "submodule foreach" to checkout 2nd level submodule' '
+       git clone super clone2 &&
+       (
+               cd clone2 &&
+               test ! -d sub1/.git &&
+               test ! -d sub2/.git &&
+               test ! -d sub3/.git &&
+               test ! -d nested1/.git &&
+               git submodule update --init &&
+               test -d sub1/.git &&
+               test -d sub2/.git &&
+               test -d sub3/.git &&
+               test -d nested1/.git &&
+               test ! -d nested1/nested2/.git &&
+               git submodule foreach "git submodule update --init" &&
+               test -d nested1/nested2/.git &&
+               test ! -d nested1/nested2/nested3/.git
+       )
+'
+
+test_expect_success 'use "foreach --recursive" to checkout all submodules' '
+       (
+               cd clone2 &&
+               git submodule foreach --recursive "git submodule update --init" &&
+               test -d nested1/nested2/nested3/.git &&
+               test -d nested1/nested2/nested3/submodule/.git
+       )
+'
+
+cat > expect <<EOF
+Entering 'nested1'
+Entering 'nested1/nested2'
+Entering 'nested1/nested2/nested3'
+Entering 'nested1/nested2/nested3/submodule'
+Entering 'sub1'
+Entering 'sub2'
+Entering 'sub3'
+EOF
+
+test_expect_success 'test messages from "foreach --recursive"' '
+       (
+               cd clone2 &&
+               git submodule foreach --recursive "true" > ../actual
+       ) &&
+       test_cmp expect actual
+'
+
+cat > expect <<EOF
+nested1-nested1
+nested2-nested2
+nested3-nested3
+submodule-submodule
+foo1-sub1
+foo2-sub2
+foo3-sub3
+EOF
+
+test_expect_success 'test "foreach --quiet --recursive"' '
+       (
+               cd clone2 &&
+               git submodule foreach -q --recursive "echo \$name-\$path" > ../actual
+       ) &&
+       test_cmp expect actual
+'
+
 test_done